Fault fltDbgOdAggRsltTenantAtomicCounterExcessPackets
                

Rule ID:52

Explanation:
This fault occurs when a significant number of excess packets are detected by a configured and enabled Atomic Counter

Recommended Action:
If you see this fault, take the following actions:

1. Check the network configuration in the packet path where this Atomic Counter policy is configured.
2. Check interface counters and rates in the packet path where this Atomic Counter policy is configured to make sure there is no oversubscription.
3. If the above action did not resolve the issue, create a tech-support file and contact Cisco TAC.

Fault Name: fltDbgOdAggRsltTenantAtomicCounterExcessPackets

Unqualified API Name: tenantAtomicCounterExcessPackets
Code: F0052
Applied Mo DN Format:

Type: communications
Cause: ac-tenant-excess-pkts
Severity: major
Weight: 100
Tags:
Message: percentExssP% of packets were received in excess during the last collection interval for name policy of type type under Tenant dn

Help:

Triggered By:
        percentExssP greater than 5