Fault fltEthpmIfPortDownNoInfra

Rule ID:546


Explanation:
This fault occurs when a port goes down

Recommended Action:
If you see this fault, take the following actions

  1. Check the port connectivity
  2. Remove the configuration or administratively shut the port if the port is not in use
  3. For mcp-loop-err-disable, this could be due to a loop in the network. Check the config to resolve any loops
  4. If the above action did not resolve the issue, create a tech-support file and contact Cisco TAC.

Raised on MO: ethpm:If

Fault Name: fltEthpmIfPortDownNoInfra

Unqualified API Name: portDownNoInfra
Code: F0546
Applied Mo DN Format:

Type: communications
Cause: interface-physical-down
Severity: warning
Weight: 100
Tags:
Message: Port is down, reason:operStQual(operErrDisQual), used by:usage

Help:

Triggered By:
         lastLinkStChg not equals 0ull
        and
         operStQual not equals mac-pinning
        and
         operSt equals down
        and
        not
          usage contains blacklist
        and
        not
          usage contains fabric
        and
        not
          usage contains infra
        and
        not
          usage contains epg