Fault fltOspfAdjEpFailed
                

Rule ID:1385

Explanation:
This fault occurs when the adjacency state is not up

Recommended Action:
To recover from this fault, try the following actions

1. Look at any configuration issues
2. Verify the configuration is correct/complete
3. Check network connectivity to the peer
4. If the above actions did not resolve the issue, generate the show tech-support file and contact Cisco TAC.

Fault Name: fltOspfAdjEpFailed

Unqualified API Name: failed
Code: F1385
Applied Mo DN Format:
     topology/pod-[id]/node-[id]/sys/ospf/inst-[name]/dom-[name]/if-[id]/adj-[id]
     sys/ospf/inst-[name]/dom-[name]/if-[id]/adj-[id]

Type: operational
Cause: protocol-ospf-adjacency-down
Severity: warning
Weight: 100
Tags:
Message: OSPF adjacency is not full, current state operSt

Help:

Triggered By:
         operSt not equals two-way
        and
         operSt not equals full