Fault fltMaintUpgJobUpgradeFailed
                

Rule ID:105


Explanation:
This fault occurs when a software upgrade fails on a controller

Recommended Action:
If you see this fault, take the following actions:


  1. If upgrade is done via API, check if the image version entered is correct.
  2. Delete the image from repo, delete and repost the firmware policy.
  3. Free-up stale/old images, delete and repost the firmware policy.
  4. Reboot the controller and retry the software installation using a policy based upgrade.
  5. Reboot the controller and retry the software installation using the command line interface.
  6. If above actions did not resolve the issue, create a tech-support file and contact Cisco TAC.


Raised on MO: maint:UpgJob

Fault Name: fltMaintUpgJobUpgradeFailed

Unqualified API Name: UpgradeFailed
Code: F0105
Applied Mo DN Format:
     topology/pod-[id]/node-[id]/sys/ctrlrfwstatuscont/upgjob
     sys/ctrlrfwstatuscont/upgjob
     topology/pod-[id]/node-[id]/sys/fwstatuscont/upgjob
     sys/fwstatuscont/upgjob

Type: operational
Cause: upgrade-failed
Severity: major
Weight: 100
Tags:
Message: Controller id failed to upgrade to desiredVersion. The upgrade has an upgrade status of upgradeStatus - upgradeStatusStr. The failure occured at the installStage stage of the install.

Help:

Triggered By:
         upgradeStatus equals completenok
        or
         upgradeStatus equals incompatible