Fault fltVmmEpPDDeployFailed
                

Rule ID:565


Explanation:
This fault is raised when the Endpoint Group cannot be deployed due to a missing or invalid configuration.

Recommended Action:
If you see this fault, take the following actions:


  1. Verify that a VLAN pool is associated to the VMM Domain.
  2. If a Port Encap value is specified in the Endpoint Group-to-VMM association, verify that this value is a VLAN encap and it is part of an encapsulation block with static allocation mode in the VLAN pool. VXLAN Port Encap is not supported.
  3. Disable EPG isolation if the EPG is associated with a VMware Domain in AVS mode, or a Microsoft(SCVMM) Domain.
  4. Review the fault message and add missing or remove invalid configuration.
  5. If the above actions did not resolve the issue, collect tech-support file and contact Cisco TAC.


Raised on MO: vmm:EpPD

Fault Name: fltVmmEpPDDeployFailed

Unqualified API Name: deployFailed
Code: F0565
Applied Mo DN Format:
     topology/pod-[id]/node-[id]/local/svc-[name]-id-[id]/uni/vmmp-[vendor]/dom-[name]/attentpcont-[name]/eppd-[epgPKey]
     uni/vmmp-[vendor]/dom-[name]/attentpcont-[name]/eppd-[epgPKey]
     topology/pod-[id]/node-[id]/local/svc-[name]-id-[id]/uni/vmmp-[vendor]/dom-[name]/eppd-[epgPKey]
     uni/vmmp-[vendor]/dom-[name]/eppd-[epgPKey]

Type: config
Cause: deployment-failed
Severity: major
Weight: 100
Tags:
Message: Deployment of EPG faultDKey failed on domain name due to deployIssues

Help:

Triggered By:
        deployIssues not equals none