Fault fltFabricProtGEpConfigurationFailed
                

Rule ID:749


Explanation:
This fault occurs when a virtual Port Channel (vPC) policy is created but it has not been deployed yet (for example in a pre-provisioning scenario) and at least one of the following are conditions true:

  1. At least one of the fabric nodes that is part of the vPC is not ready
  2. The IP address for at least one of the fabric nodes is unknown
  3. One of the fabric nodes that is part of the vPC pair is already paired with another node (each node can only be part of one vPC pair)
  4. One of the fabric nodes is not a leaf (vPC pairs can only be formed between two leafs)
  5. The Virtual Ip address has been not allocated yet
  6. The Logical Pair Id has not been allocated yet
  7. Nodes are not in same POD


Recommended Action:
If you see this fault, take the following actions:


  1. Verify that corresponding fabric nodes are ready
  2. Verify that corresponding fabric nodes are ready
  3. Verify that corresponding fabric nodes are leaf
  4. Verify that the fabric node is not already part of another protection group
  5. In case of fabricExplicitGEp, verify that the pair id is set
  6. If the above actions did not resolve the issue, create a tech-support file and contact Cisco TAC.


Raised on MO: fabric:ProtGEp

Fault Name: fltFabricProtGEpConfigurationFailed

Unqualified API Name: configurationFailed
Code: F0749
Applied Mo DN Format:
     topology/pod-[id]/node-[id]/local/svc-[name]-id-[id]/uni/fabric/protpol/
     uni/fabric/protpol/

Type: config
Cause: configuration-failed
Severity: warning
Weight: 100
Tags:
Message: Failed to configure the vPC policy for the vPC pair id and a virtual IP address of virtualIp because: configQual

Help:

Triggered By:
         configQual not equals none
        and
         configQual not equals pairs-not-same-zone
        and
         configSt equals none