Fault fltFabricProtGEpOperStateChange
                

Rule ID:750


Explanation:
This fault is occurs when a vPC policy has been deployed to a fabric node, then at least one of the following conditions is true:

  1. One of the fabric nodes that is part of the vPC is not ready
  2. The fabric node ip address is not known
  3. One of the fabric nodes is not a leaf (vPC pairs can only be formed between two leafs)

  4. Recommended Action: If you see this fault, take the following actions:
    1. Verify that corresponding fabric nodes are ready
    2. Verify that corresponding fabric nodes are leafs
    3. Verify that the fabric node is not already part of another protection group
    4. If the above actions did not resolve the issue, create a tech-support file and contact Cisco TAC.


    Raised on MO: fabric:ProtGEp

    Fault Name: fltFabricProtGEpOperStateChange

    Unqualified API Name: operStateChange
    Code: F0750
    Applied Mo DN Format:
         topology/pod-[id]/node-[id]/local/svc-[name]-id-[id]/uni/fabric/protpol/
         uni/fabric/protpol/

    Type: config
    Cause: oper-state-change
    Severity: minor
    Weight: 100
    Tags:
    Message: The vPC policy for the vPC pair id and a virtual IP address of virtualIp has changed state because: configQual

    Help:

    Triggered By:
             configQual not equals none
            and
             configQual not equals pairs-not-same-zone
            and
             configSt equals deployed