Fault fltBgpPeerEntryOperStShut
                

Rule ID:1214


Explanation:
This fault occurs when the peer is shut down because the prefix limit is exceeded or no memory

Recommended Action:
To recover from this fault, try the following actions


  1. Look at any configuration issues
  2. Verify the configuration is correct/complete
  3. Reduce the number of prefixes exported into bgp
  4. If the above actions did not resolve the issue, generate the show tech-support file and contact Cisco TAC.

Raised on MO: bgp:PeerEntry

Fault Name: fltBgpPeerEntryOperStShut

Unqualified API Name: operStShut
Code: F1214
Applied Mo DN Format:
     topology/pod-[id]/node-[id]/sys/bgp/inst/dom-[name]/peer-[addr]/ent-[addr]
     sys/bgp/inst/dom-[name]/peer-[addr]/ent-[addr]

Type: operational
Cause: protocol-bgp-adjacency-down
Severity: warning
Weight: 100
Tags:
Message: BGP peer is shut, reason: shutStQual

Help:

Triggered By:
         operSt equals shut
        and
          shutStQual equals no-mem
         or
          shutStQual equals exceeded-pfxlimit