Fault fltDbgAcPathAOnGoingAtomicCounterExcessMajor
                

Rule ID:1547

Explanation:
This fault occurs when a significant number of excess packets are detected by a configured and enabled Atomic Counter

Recommended Action:
If you see this fault, take the following actions:

1. Check the network configuration in the packet path where this Atomic Counter Policy is configured.
2. Check interface counters and rates in the packet path where this Atomic Counter Policy is configured to make sure there is no oversubscription.
3. If the above action did not resolve the issue, create a tech-support file and contact Cisco TAC.

Fault Name: fltDbgAcPathAOnGoingAtomicCounterExcessMajor

Unqualified API Name: OnGoingAtomicCounterExcessMajor
Code: F1547
Applied Mo DN Format:

Type: communications
Cause: packets-dropped
Severity: major
Weight: 100
Tags:
Message: excessPktPercentage% of packets were received in excess during the last collection intervalexcessPktPercentage% of packets were received in excess during the last collection interval on the path from node srcNodeId to node dstNodeIdexcessPktPercentage% of packets were received in excess during the last collection interval on the path from the VPC pair srcNodeId-srcNodeId2 to the VPC pair dstNodeId-dstNodeId2excessPktPercentage% of packets were received in excess during the last collection interval on the path from the VPC pair srcNodeId-srcNodeId2 to the single node dstNodeIdexcessPktPercentage% of packets were received in excess during the last collection interval on the path from the single node srcNodeId to the VPC pair dstNodeId-dstNodeId2

Help:

Triggered By:
         excessPktPercentage greater or equal 5u
        and
         suspect equals no