Properties Summary |
Defined in: eqptcapacity:VlanUsage |
scalar:Uint32
|
totalAvg (eqptcapacity:VlanUsage:totalAvg)
The average reading for the total memory used in the system. This value is reset to 0 at the beginning of each interval.
|
scalar:Uint32
|
totalBase (eqptcapacity:VlanUsage:totalBase)
The cumulative value of the received packets counter. This counter specifies number of the received packets. This value continues through each interval without resetting to zero.
|
scalar:Uint32
|
totalCapAvg (eqptcapacity:VlanUsage:totalCapAvg)
Vlan entries capacity. This is the average value read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint32
|
totalCapBase (eqptcapacity:VlanUsage:totalCapBase)
Vlan entries capacity. This is the cumulative value of the counter after the last reset of the hardware counter. Note that this value continues through each interval without resetting to zero. Used for internal purposes.
|
scalar:Uint32
|
totalCapCum (eqptcapacity:VlanUsage:totalCapCum)
Vlan entries capacity. The total sum of the values read. Note that this value continues through each interval without resetting to zero.
|
scalar:Uint32
|
totalCapLast (eqptcapacity:VlanUsage:totalCapLast)
Vlan entries capacity. This is the most current value read by the counter.
|
scalar:Uint32
|
totalCapMax (eqptcapacity:VlanUsage:totalCapMax)
Vlan entries capacity. This is the largest value read by the counter during the collection interval. This value is only overwritten if the most current value is larger than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 4, the previous value is overwritten with 4. If the third reading is smaller than 4, the value remains at 4. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint32
|
totalCapMin (eqptcapacity:VlanUsage:totalCapMin)
Vlan entries capacity. This is the smallest value read by the counter during the collection interval. This value is only overwritten if the most current value is smaller than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 2, the previous value is overwritten with 2. If the third reading is larger than 2, the value remains at 2. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint32
|
totalCapPer (eqptcapacity:VlanUsage:totalCapPer)
Vlan entries capacity. The total sum of the values read during the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Double
|
totalCapRate (eqptcapacity:VlanUsage:totalCapRate)
Vlan entries capacity. This is the rate of the counter during the collection interval. The rate is calculated by dividing the periodic value by the length of the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint16
|
totalCapSpct (eqptcapacity:VlanUsage:totalCapSpct)
Vlan entries capacity. This is the number of missed and/or incorrect values read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
stats:ThresholdedMask
scalar:Bitmask64
|
totalCapThr (eqptcapacity:VlanUsage:totalCapThr)
Vlan entries capacity. This indicates the properties of the counter that crossed the threshold during the collection interval. Note that this value resets at the beginning of each interval.
|
scalar:Sint32
|
totalCapTr (eqptcapacity:VlanUsage:totalCapTr)
Vlan entries capacity. This is the trending value of the counter. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint32
|
totalCapTrBase (eqptcapacity:VlanUsage:totalCapTrBase)
Vlan entries capacity. This is the cumulative value of the counter from the previous collection interval. Used for internal purposes.
|
scalar:Uint32
|
totalCum (eqptcapacity:VlanUsage:totalCum)
The sum total of values read to specify the total memory used in the system. This value continues through each interval without resetting to zero.
|
scalar:Uint32
|
totalLast (eqptcapacity:VlanUsage:totalLast)
The last read value for specifying the total memory used in the system. This value continues through each interval without resetting to zero.
|
scalar:Uint32
|
totalMax (eqptcapacity:VlanUsage:totalMax)
The largest reading for the total memory used in the system. This value is only overwritten if the most current value is greater than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 5, the previous value is overwritten with 5. If the third reading is smaller than 5, the value remains at 5. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint32
|
totalMin (eqptcapacity:VlanUsage:totalMin)
The lowest reading for the total memory used in the system. This value is only overwritten if the most current value is less than the previous value. For example, if the value of the first reading is 5 and the value of the second reading is 3, the previous value is overwritten with 3. If the third reading is greater than 3, the value remains at 3. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint32
|
totalPer (eqptcapacity:VlanUsage:totalPer)
The sum total of values read to specify the total memory used in the system. This value resets to 0 at the beginning of each interval.
|
scalar:Double
|
totalRate (eqptcapacity:VlanUsage:totalRate)
The rate of values read to specify the total memory used in the system. This value is calculated by dividing the periodic value by the length of the interval. This value resets to 0 at the beginning of each interval.
|
scalar:Uint16
|
totalSpct (eqptcapacity:VlanUsage:totalSpct)
The missed and/or incorrect readings for the total memory used in the system. This value is reset to 0 at the beginning of each interval.
|
stats:ThresholdedMask
scalar:Bitmask64
|
totalThr (eqptcapacity:VlanUsage:totalThr)
The threshold crossing flags for the total memory used in the system. The threshold crossing flags indicate the properties of the counter that crossed the threshold during the collection interval. Note that this value resets at the beginning of each interval.
|
scalar:Sint32
|
totalTr (eqptcapacity:VlanUsage:totalTr)
The trending value for the total memory used in the system. This value is reset to 0 at the beginning of each interval.
|
scalar:Uint32
|
totalTrBase (eqptcapacity:VlanUsage:totalTrBase)
The cumulative value of the total memory used in the system from the previous interval. This value does not reset.
|
childAction
Type: mo:ModificationChildAction
Primitive Type: scalar:Bitmask32
Units: null
Encrypted: false
Access: implicit
Category: TopLevelChildAction
Comments:
-
Delete or ignore. For internal use only.
| |
Constants |
deleteAll |
16384u |
deleteAll |
NO COMMENTS
|
ignore |
4096u |
ignore |
NO COMMENTS
|
deleteNonPresent |
8192u |
deleteNonPresent |
NO COMMENTS
|
DEFAULT |
0 |
--- |
This type is used to
|
|
cnt
Type: scalar:Uint16
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
The number of readings made within the current sample.
dn
Type: reference:BinRef
Units: null
Encrypted: false
Access: implicit
Category: TopLevelDn
Comments:
-
A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.
lastCollOffset
Type: scalar:Uint32
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
repIntvEnd
Type: scalar:Date
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
repIntvStart
Type: scalar:Date
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
rn
Type: reference:BinRN
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRn
Comments:
-
Identifies an object from its siblings within the context of its parent object. The distinguished name contains a sequence of relative names.
status
Type: mo:ModificationStatus
Primitive Type: scalar:Bitmask32
Units: null
Encrypted: false
Access: implicit
Category: TopLevelStatus
Comments:
-
The upgrade status. This property is for internal use only.
| |
Constants |
created |
2u |
created |
In a setter method: specifies that an object should be created.
An error is returned if the object already exists.
In the return value of a setter method: indicates that an object has been created.
|
modified |
4u |
modified |
In a setter method: specifies that an object should be modified
In the return value of a setter method: indicates that an object has been modified.
|
deleted |
8u |
deleted |
In a setter method: specifies that an object should be deleted.
In the return value of a setter method: indicates that an object has been deleted.
|
DEFAULT |
0 |
--- |
This type controls the life cycle of objects passed in the XML API.
When used in a setter method (such as configConfMo), the ModificationStatus
specifies whether an object should be created, modified, deleted or removed.
In the return value of a setter method, the ModificationStatus indicates the actual
operation that was performed. For example, the ModificationStatus is set to "created"
if the object was created. The ModificationStatus is not set if the object was neither
created, modified, deleted or removed.
When invoking a setter method, the ModificationStatus is optional:
If a setter method such as configConfMo is invoked and the ModificationStatus
is not set, the system automatically determines if the object should be created or modified.
|
|
totalAvg
Type: scalar:Uint32
Units: count
Encrypted: false
Access: oper
Category: ImplicitAvg
Comments:
-
The average reading for the total memory used in the system. This value is reset to 0 at the beginning of each interval.
totalBase
Type: scalar:Uint32
Units: count
Encrypted: false
Access: oper
Category: ImplicitBaseline
Comments:
-
The cumulative value of the received packets counter. This counter specifies number of the received packets. This value continues through each interval without resetting to zero.
totalCapAvg
Type: scalar:Uint32
Units: count
Encrypted: false
Access: oper
Category: ImplicitAvg
Comments:
-
Vlan entries capacity. This is the average value read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
totalCapBase
Type: scalar:Uint32
Units: count
Encrypted: false
Access: oper
Category: ImplicitBaseline
Comments:
-
Vlan entries capacity. This is the cumulative value of the counter after the last reset of the hardware counter. Note that this value continues through each interval without resetting to zero. Used for internal purposes.
totalCapCum
Type: scalar:Uint32
Units: count
Encrypted: false
Access: oper
Category: ImplicitCumulative
Comments:
-
Vlan entries capacity. The total sum of the values read. Note that this value continues through each interval without resetting to zero.
totalCapLast
Type: scalar:Uint32
Units: count
Encrypted: false
Access: oper
Category: ImplicitLastReading
Comments:
-
Vlan entries capacity. This is the most current value read by the counter.
totalCapMax
Type: scalar:Uint32
Units: count
Encrypted: false
Access: oper
Category: ImplicitMax
Comments:
-
Vlan entries capacity. This is the largest value read by the counter during the collection interval. This value is only overwritten if the most current value is larger than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 4, the previous value is overwritten with 4. If the third reading is smaller than 4, the value remains at 4. Note that this value resets to 0 at the beginning of each interval.
totalCapMin
Type: scalar:Uint32
Units: count
Encrypted: false
Access: oper
Category: ImplicitMin
Comments:
-
Vlan entries capacity. This is the smallest value read by the counter during the collection interval. This value is only overwritten if the most current value is smaller than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 2, the previous value is overwritten with 2. If the third reading is larger than 2, the value remains at 2. Note that this value resets to 0 at the beginning of each interval.
totalCapPer
Type: scalar:Uint32
Units: count
Encrypted: false
Access: oper
Category: ImplicitPeriodic
Comments:
-
Vlan entries capacity. The total sum of the values read during the collection interval. Note that this value resets to 0 at the beginning of each interval.
totalCapRate
Type: scalar:Double
Units: count
Encrypted: false
Access: oper
Category: ImplicitRate
Comments:
-
Vlan entries capacity. This is the rate of the counter during the collection interval. The rate is calculated by dividing the periodic value by the length of the collection interval. Note that this value resets to 0 at the beginning of each interval.
totalCapSpct
Type: scalar:Uint16
Units: count
Encrypted: false
Access: oper
Category: ImplicitSuspect
Comments:
-
Vlan entries capacity. This is the number of missed and/or incorrect values read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
totalCapThr
Type: stats:ThresholdedMask
Primitive Type: scalar:Bitmask64
Units: count
Encrypted: false
Access: oper
Category: ImplicitThresholded
Comments:
-
Vlan entries capacity. This indicates the properties of the counter that crossed the threshold during the collection interval. Note that this value resets at the beginning of each interval.
| |
Constants |
unspecified |
0ull |
--- |
NO COMMENTS
|
cumulativeWarn |
1024ull |
cumulative severity warning |
NO COMMENTS
|
periodicCrit |
1048576ull |
periodic severity critical |
NO COMMENTS
|
maxLow |
1073741824ull |
max crossed low threshold |
NO COMMENTS
|
avgMajor |
1099511627776ull |
avg severity major |
NO COMMENTS
|
rateHigh |
1125899906842624ull |
rate crossed high threshold |
NO COMMENTS
|
cumulativeRecovering |
128ull |
cumulative recovering |
NO COMMENTS
|
periodicWarn |
131072ull |
periodic severity warning |
NO COMMENTS
|
minCrit |
134217728ull |
min severity critical |
NO COMMENTS
|
avgLow |
137438953472ull |
avg crossed low threshold |
NO COMMENTS
|
trendMajor |
140737488355328ull |
trend severity major |
NO COMMENTS
|
periodicRecovering |
16384ull |
periodic recovering |
NO COMMENTS
|
minWarn |
16777216ull |
min severity warning |
NO COMMENTS
|
lastReadingMinor |
16ull |
lastReading severity minor |
NO COMMENTS
|
maxCrit |
17179869184ull |
max severity critical |
NO COMMENTS
|
trendLow |
17592186044416ull |
trend crossed low threshold |
NO COMMENTS
|
rateMajor |
18014398509481984ull |
rate severity major |
NO COMMENTS
|
lastReadingRecovering |
1ull |
lastReading recovering |
NO COMMENTS
|
cumulativeMinor |
2048ull |
cumulative severity minor |
NO COMMENTS
|
minRecovering |
2097152ull |
min recovering |
NO COMMENTS
|
maxWarn |
2147483648ull |
max severity warning |
NO COMMENTS
|
avgCrit |
2199023255552ull |
avg severity critical |
NO COMMENTS
|
rateLow |
2251799813685248ull |
rate crossed low threshold |
NO COMMENTS
|
cumulativeHigh |
256ull |
cumulative crossed high threshold |
NO COMMENTS
|
periodicMinor |
262144ull |
periodic severity minor |
NO COMMENTS
|
maxRecovering |
268435456ull |
max recovering |
NO COMMENTS
|
avgWarn |
274877906944ull |
avg severity warning |
NO COMMENTS
|
trendCrit |
281474976710656ull |
trend severity critical |
NO COMMENTS
|
lastReadingHigh |
2ull |
lastReading crossed high threshold |
NO COMMENTS
|
periodicHigh |
32768ull |
periodic crossed high threshold |
NO COMMENTS
|
lastReadingMajor |
32ull |
lastReading severity major |
NO COMMENTS
|
minMinor |
33554432ull |
min severity minor |
NO COMMENTS
|
avgRecovering |
34359738368ull |
avg recovering |
NO COMMENTS
|
trendWarn |
35184372088832ull |
trend severity warning |
NO COMMENTS
|
rateCrit |
36028797018963968ull |
rate severity critical |
NO COMMENTS
|
cumulativeMajor |
4096ull |
cumulative severity major |
NO COMMENTS
|
minHigh |
4194304ull |
min crossed high threshold |
NO COMMENTS
|
maxMinor |
4294967296ull |
max severity minor |
NO COMMENTS
|
trendRecovering |
4398046511104ull |
trend recovering |
NO COMMENTS
|
rateWarn |
4503599627370496ull |
rate severity warning |
NO COMMENTS
|
lastReadingLow |
4ull |
lastReading crossed low threshold |
NO COMMENTS
|
cumulativeLow |
512ull |
cumulative crossed low threshold |
NO COMMENTS
|
periodicMajor |
524288ull |
periodic severity major |
NO COMMENTS
|
maxHigh |
536870912ull |
max crossed high threshold |
NO COMMENTS
|
avgMinor |
549755813888ull |
avg severity minor |
NO COMMENTS
|
rateRecovering |
562949953421312ull |
rate recovering |
NO COMMENTS
|
lastReadingCrit |
64ull |
lastReading severity critical |
NO COMMENTS
|
periodicLow |
65536ull |
periodic crossed low threshold |
NO COMMENTS
|
minMajor |
67108864ull |
min severity major |
NO COMMENTS
|
avgHigh |
68719476736ull |
avg crossed high threshold |
NO COMMENTS
|
trendMinor |
70368744177664ull |
trend severity minor |
NO COMMENTS
|
cumulativeCrit |
8192ull |
cumulative severity critical |
NO COMMENTS
|
minLow |
8388608ull |
min crossed low threshold |
NO COMMENTS
|
maxMajor |
8589934592ull |
max severity major |
NO COMMENTS
|
trendHigh |
8796093022208ull |
trend crossed high threshold |
NO COMMENTS
|
lastReadingWarn |
8ull |
lastReading severity warning |
NO COMMENTS
|
rateMinor |
9007199254740992ull |
rate severity minor |
NO COMMENTS
|
DEFAULT |
unspecified(0ull) |
--- |
NO COMMENTS
|
|
totalCapTr
Type: scalar:Sint32
Units: count
Encrypted: false
Access: oper
Category: ImplicitTrend
Comments:
-
Vlan entries capacity. This is the trending value of the counter. Note that this value resets to 0 at the beginning of each interval.
totalCapTrBase
Type: scalar:Uint32
Units: count
Encrypted: false
Access: oper
Category: ImplicitTrendBase
Comments:
-
Vlan entries capacity. This is the cumulative value of the counter from the previous collection interval. Used for internal purposes.
totalCum
Type: scalar:Uint32
Units: count
Encrypted: false
Access: oper
Category: ImplicitCumulative
Comments:
-
The sum total of values read to specify the total memory used in the system. This value continues through each interval without resetting to zero.
totalLast
Type: scalar:Uint32
Units: count
Encrypted: false
Access: oper
Category: ImplicitLastReading
Comments:
-
The last read value for specifying the total memory used in the system. This value continues through each interval without resetting to zero.
totalMax
Type: scalar:Uint32
Units: count
Encrypted: false
Access: oper
Category: ImplicitMax
Comments:
-
The largest reading for the total memory used in the system. This value is only overwritten if the most current value is greater than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 5, the previous value is overwritten with 5. If the third reading is smaller than 5, the value remains at 5. Note that this value resets to 0 at the beginning of each interval.
totalMin
Type: scalar:Uint32
Units: count
Encrypted: false
Access: oper
Category: ImplicitMin
Comments:
-
The lowest reading for the total memory used in the system. This value is only overwritten if the most current value is less than the previous value. For example, if the value of the first reading is 5 and the value of the second reading is 3, the previous value is overwritten with 3. If the third reading is greater than 3, the value remains at 3. Note that this value resets to 0 at the beginning of each interval.
totalPer
Type: scalar:Uint32
Units: count
Encrypted: false
Access: oper
Category: ImplicitPeriodic
Comments:
-
The sum total of values read to specify the total memory used in the system. This value resets to 0 at the beginning of each interval.
totalRate
Type: scalar:Double
Units: count
Encrypted: false
Access: oper
Category: ImplicitRate
Comments:
-
The rate of values read to specify the total memory used in the system. This value is calculated by dividing the periodic value by the length of the interval. This value resets to 0 at the beginning of each interval.
totalSpct
Type: scalar:Uint16
Units: count
Encrypted: false
Access: oper
Category: ImplicitSuspect
Comments:
-
The missed and/or incorrect readings for the total memory used in the system. This value is reset to 0 at the beginning of each interval.
totalThr
Type: stats:ThresholdedMask
Primitive Type: scalar:Bitmask64
Units: count
Encrypted: false
Access: oper
Category: ImplicitThresholded
Comments:
-
The threshold crossing flags for the total memory used in the system. The threshold crossing flags indicate the properties of the counter that crossed the threshold during the collection interval. Note that this value resets at the beginning of each interval.
| |
Constants |
unspecified |
0ull |
--- |
NO COMMENTS
|
cumulativeWarn |
1024ull |
cumulative severity warning |
NO COMMENTS
|
periodicCrit |
1048576ull |
periodic severity critical |
NO COMMENTS
|
maxLow |
1073741824ull |
max crossed low threshold |
NO COMMENTS
|
avgMajor |
1099511627776ull |
avg severity major |
NO COMMENTS
|
rateHigh |
1125899906842624ull |
rate crossed high threshold |
NO COMMENTS
|
cumulativeRecovering |
128ull |
cumulative recovering |
NO COMMENTS
|
periodicWarn |
131072ull |
periodic severity warning |
NO COMMENTS
|
minCrit |
134217728ull |
min severity critical |
NO COMMENTS
|
avgLow |
137438953472ull |
avg crossed low threshold |
NO COMMENTS
|
trendMajor |
140737488355328ull |
trend severity major |
NO COMMENTS
|
periodicRecovering |
16384ull |
periodic recovering |
NO COMMENTS
|
minWarn |
16777216ull |
min severity warning |
NO COMMENTS
|
lastReadingMinor |
16ull |
lastReading severity minor |
NO COMMENTS
|
maxCrit |
17179869184ull |
max severity critical |
NO COMMENTS
|
trendLow |
17592186044416ull |
trend crossed low threshold |
NO COMMENTS
|
rateMajor |
18014398509481984ull |
rate severity major |
NO COMMENTS
|
lastReadingRecovering |
1ull |
lastReading recovering |
NO COMMENTS
|
cumulativeMinor |
2048ull |
cumulative severity minor |
NO COMMENTS
|
minRecovering |
2097152ull |
min recovering |
NO COMMENTS
|
maxWarn |
2147483648ull |
max severity warning |
NO COMMENTS
|
avgCrit |
2199023255552ull |
avg severity critical |
NO COMMENTS
|
rateLow |
2251799813685248ull |
rate crossed low threshold |
NO COMMENTS
|
cumulativeHigh |
256ull |
cumulative crossed high threshold |
NO COMMENTS
|
periodicMinor |
262144ull |
periodic severity minor |
NO COMMENTS
|
maxRecovering |
268435456ull |
max recovering |
NO COMMENTS
|
avgWarn |
274877906944ull |
avg severity warning |
NO COMMENTS
|
trendCrit |
281474976710656ull |
trend severity critical |
NO COMMENTS
|
lastReadingHigh |
2ull |
lastReading crossed high threshold |
NO COMMENTS
|
periodicHigh |
32768ull |
periodic crossed high threshold |
NO COMMENTS
|
lastReadingMajor |
32ull |
lastReading severity major |
NO COMMENTS
|
minMinor |
33554432ull |
min severity minor |
NO COMMENTS
|
avgRecovering |
34359738368ull |
avg recovering |
NO COMMENTS
|
trendWarn |
35184372088832ull |
trend severity warning |
NO COMMENTS
|
rateCrit |
36028797018963968ull |
rate severity critical |
NO COMMENTS
|
cumulativeMajor |
4096ull |
cumulative severity major |
NO COMMENTS
|
minHigh |
4194304ull |
min crossed high threshold |
NO COMMENTS
|
maxMinor |
4294967296ull |
max severity minor |
NO COMMENTS
|
trendRecovering |
4398046511104ull |
trend recovering |
NO COMMENTS
|
rateWarn |
4503599627370496ull |
rate severity warning |
NO COMMENTS
|
lastReadingLow |
4ull |
lastReading crossed low threshold |
NO COMMENTS
|
cumulativeLow |
512ull |
cumulative crossed low threshold |
NO COMMENTS
|
periodicMajor |
524288ull |
periodic severity major |
NO COMMENTS
|
maxHigh |
536870912ull |
max crossed high threshold |
NO COMMENTS
|
avgMinor |
549755813888ull |
avg severity minor |
NO COMMENTS
|
rateRecovering |
562949953421312ull |
rate recovering |
NO COMMENTS
|
lastReadingCrit |
64ull |
lastReading severity critical |
NO COMMENTS
|
periodicLow |
65536ull |
periodic crossed low threshold |
NO COMMENTS
|
minMajor |
67108864ull |
min severity major |
NO COMMENTS
|
avgHigh |
68719476736ull |
avg crossed high threshold |
NO COMMENTS
|
trendMinor |
70368744177664ull |
trend severity minor |
NO COMMENTS
|
cumulativeCrit |
8192ull |
cumulative severity critical |
NO COMMENTS
|
minLow |
8388608ull |
min crossed low threshold |
NO COMMENTS
|
maxMajor |
8589934592ull |
max severity major |
NO COMMENTS
|
trendHigh |
8796093022208ull |
trend crossed high threshold |
NO COMMENTS
|
lastReadingWarn |
8ull |
lastReading severity warning |
NO COMMENTS
|
rateMinor |
9007199254740992ull |
rate severity minor |
NO COMMENTS
|
DEFAULT |
unspecified(0ull) |
--- |
NO COMMENTS
|
|
totalTr
Type: scalar:Sint32
Units: count
Encrypted: false
Access: oper
Category: ImplicitTrend
Comments:
-
The trending value for the total memory used in the system. This value is reset to 0 at the beginning of each interval.
totalTrBase
Type: scalar:Uint32
Units: count
Encrypted: false
Access: oper
Category: ImplicitTrendBase
Comments:
-
The cumulative value of the total memory used in the system from the previous interval. This value does not reset.