Properties Summary |
Defined in: fv:ACtx |
vz:BinaryAction
scalar:Enum8
|
knwMcastAct (fv:ACtx:knwMcastAct)
|
l3ext:PcEnfDir
scalar:Enum8
|
pcEnfDir (fv:ACtx:pcEnfDir)
Policy Control Enforcement Direction.
It is used for defining policy enforcemnt direction for the traffic coming to or from an L3Out.
Egress and Ingress directions are wrt L3Out. Default will be Ingress. But on the existing L3Outs
during upgrade it will get set to Egress so that right after upgrade behavior doesnt change for them.
This also means that there is no special upgrade sequence needed for upgrading to the release introducing
this feature. After upgrade user would have to change the property value to Ingress. Once changed,
system will reprogram the rules and prefix entry. Rules will get removed from the egress leaf and will
get insatlled on the ingress leaf. Actrl prefix entry, if not already, will get installed on the ingress
leaf.
This feature will be ignored for the following cases:
1. Golf: Gets applied at Ingress by design.
2. Transit Rules get applied at Ingress by design. 4. vzAny 5. Taboo
|
scalar:Bool
|
pcEnfDirUpdated (fv:ACtx:pcEnfDirUpdated)
Policy Enforcement Direction Post Upgrade Status
|
fv:PcEnfPref
scalar:Enum8
|
pcEnfPref (fv:ACtx:pcEnfPref)
|
vz:GPCTag
scalar:Uint32
|
pcTag (fv:ACtx:pcTag)
|
fv:ScopeId
scalar:Uint32
|
scope (fv:ACtx:scope)
|
childAction
Type: mo:ModificationChildAction
Primitive Type: scalar:Bitmask32
Units: null
Encrypted: false
Access: implicit
Category: TopLevelChildAction
Comments:
-
Delete or ignore. For internal use only.
| |
Constants |
deleteAll |
16384u |
deleteAll |
NO COMMENTS
|
ignore |
4096u |
ignore |
NO COMMENTS
|
deleteNonPresent |
8192u |
deleteNonPresent |
NO COMMENTS
|
DEFAULT |
0 |
--- |
This type is used to
|
|
descr
Type: naming:Descr
Primitive Type: string:Basic
Overrides:pol:Def:descr
Paths: naming:Described:descr
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
Range: min: "0" max: "128"
Allowed Chars:
Regex: [a-zA-Z0-9\\!#$%()*,-./:;@ _{|}~?&+]+
Comments:
-
Specifies a description of the policy definition root.
dn
Type: reference:BinRef
Units: null
Encrypted: false
Access: implicit
Category: TopLevelDn
Comments:
-
A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.
knwMcastAct
Type: vz:BinaryAction
Primitive Type: scalar:Enum8
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
Comments:
-
| |
Constants |
deny |
0 |
Deny |
deny
|
permit |
1 |
permit |
NO COMMENTS
|
DEFAULT |
permit(1) |
permit |
NO COMMENTS
|
|
name
Type: naming:Name
Primitive Type: string:Basic
Overrides:naming:NamedObject:name
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
Range: min: "0" max: "64"
Allowed Chars:
Regex: [a-zA-Z0-9_.:-]+
Comments:
-
null
nameAlias
Type: naming:NameAlias
Primitive Type: string:Basic
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
Range: min: "0" max: "63"
Allowed Chars:
Regex: [a-zA-Z0-9_.-]+
Comments:
-
NO COMMENTS
ownerKey
Type: naming:Descr
Primitive Type: string:Basic
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
Range: min: "0" max: "128"
Allowed Chars:
Regex: [a-zA-Z0-9\\!#$%()*,-./:;@ _{|}~?&+]+
Comments:
-
The key for enabling clients to own their data for entity correlation.
ownerTag
Type: naming:Descr
Primitive Type: string:Basic
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
Range: min: "0" max: "64"
Allowed Chars:
Regex: [a-zA-Z0-9\\!#$%()*,-./:;@ _{|}~?&+]+
Comments:
-
A tag for enabling clients to add their own data. For example, to indicate who created this object.
pcEnfDir
Type: l3ext:PcEnfDir
Primitive Type: scalar:Enum8
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
Comments:
-
Policy Control Enforcement Direction.
It is used for defining policy enforcemnt direction for the traffic coming to or from an L3Out.
Egress and Ingress directions are wrt L3Out. Default will be Ingress. But on the existing L3Outs
during upgrade it will get set to Egress so that right after upgrade behavior doesnt change for them.
This also means that there is no special upgrade sequence needed for upgrading to the release introducing
this feature. After upgrade user would have to change the property value to Ingress. Once changed,
system will reprogram the rules and prefix entry. Rules will get removed from the egress leaf and will
get insatlled on the ingress leaf. Actrl prefix entry, if not already, will get installed on the ingress
leaf.
This feature will be ignored for the following cases:
1. Golf: Gets applied at Ingress by design.
2. Transit Rules get applied at Ingress by design. 4. vzAny 5. Taboo
| |
Constants |
ingress |
0 |
Ingress |
Policy Will be applied at the Ingress Node
|
egress |
1 |
Egress |
Policy will be applied at the Egress Node
|
DEFAULT |
ingress(0) |
Ingress |
Policy Will be applied at the Ingress Node
|
|
pcEnfDirUpdated
Type: scalar:Bool
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
Policy Enforcement Direction Post Upgrade Status
| |
Constants |
no |
false |
--- |
NO COMMENTS
|
yes |
true |
--- |
NO COMMENTS
|
DEFAULT |
no(false) |
--- |
NO COMMENTS
|
|
pcEnfPref
Type: fv:PcEnfPref
Primitive Type: scalar:Enum8
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
Comments:
-
| |
Constants |
enforced |
1 |
Enforced |
Enforce access control rules for this private network
|
unenforced |
2 |
Unenforced |
Do not enforce access control rules for this private network
|
DEFAULT |
enforced(1) |
Enforced |
Enforce access control rules for this private network
|
|
pcTag
Type: vz:GPCTag
Primitive Type: scalar:Uint32
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
| |
Constants |
any |
0u |
any |
NO COMMENTS
|
DEFAULT |
0 |
--- |
A shorthand for GroupPolicyClassTag:
A tag that is used to identify and classify
a particular group of resources/end-points
for policy enforcement purposes
|
|
rn
Type: reference:BinRN
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRn
Comments:
-
Identifies an object from its siblings within the context of its parent object. The distinguished name contains a sequence of relative names.
scope
Type: fv:ScopeId
Primitive Type: scalar:Uint32
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
| |
Constants |
defaultValue |
0u |
--- |
NO COMMENTS
|
|
seg
Type: fv:Seg
Primitive Type: scalar:Uint32
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
A LAN domain segment.
status
Type: mo:ModificationStatus
Primitive Type: scalar:Bitmask32
Units: null
Encrypted: false
Access: implicit
Category: TopLevelStatus
Comments:
-
The upgrade status. This property is for internal use only.
| |
Constants |
created |
2u |
created |
In a setter method: specifies that an object should be created.
An error is returned if the object already exists.
In the return value of a setter method: indicates that an object has been created.
|
modified |
4u |
modified |
In a setter method: specifies that an object should be modified
In the return value of a setter method: indicates that an object has been modified.
|
deleted |
8u |
deleted |
In a setter method: specifies that an object should be deleted.
In the return value of a setter method: indicates that an object has been deleted.
|
DEFAULT |
0 |
--- |
This type controls the life cycle of objects passed in the XML API.
When used in a setter method (such as configConfMo), the ModificationStatus
specifies whether an object should be created, modified, deleted or removed.
In the return value of a setter method, the ModificationStatus indicates the actual
operation that was performed. For example, the ModificationStatus is set to "created"
if the object was created. The ModificationStatus is not set if the object was neither
created, modified, deleted or removed.
When invoking a setter method, the ModificationStatus is optional:
If a setter method such as configConfMo is invoked and the ModificationStatus
is not set, the system automatically determines if the object should be created or modified.
|
|