Overview  Diagram  Inheritance  Events  Faults  FSMs  Properties Summary  Properties Detail 

Class l1:EthIf (ABSTRACT)

Class ID:3614
Class Label: Ethernet Interface
Encrypted: false - Exportable: false - Persistent: true - Configurable: false - Subject to Quota: Disabled
Write Access: [NON CONFIGURABLE]
Read Access: [access-connectivity-l1, access-connectivity-l2, access-connectivity-l3, access-protocol-l2, admin, fabric-connectivity-l3, fabric-protocol-l2, tenant-connectivity-l3, tenant-ext-connectivity-l3, tenant-ext-protocol-l2, tenant-protocol-l2]
Creatable/Deletable: no (see Container Mos for details)
Possible Semantic Scopes: Infra, Fabric,
Semantic Scope Evaluation Rule: Subclasses
Monitoring Policy Source: Parent
Monitoring Flags : [ IsObservable: true, HasStats: false, HasFaults: true, HasHealth: true, HasEventRules: false ]

An abstraction of Ethernet interface properties that are common between Ethernet physical interfaces and aggregated interfaces.

Naming Rules 


DN FORMAT:


Diagram

Super Mo: l1:If,
Sub Mos: cnw:AggrIf, cnw:PhysIf, l1:PhysIf, pc:AggrIf,
Contained Mos: fv:DomDef,
Relations From: l2:BrIf, l3:EncRtdIf, l2:ProtIf, l2:ExtIf, leqpt:LooseNode, fv:Locale, l3:RtdIf, span:ASource, l1:ObservedEthIf, nw:PathEp,
Relations To: infra:AttEntityP, cdp:IfPol, netflow:MonitorPol, fc:IfPol, fabric:HIfPol, l2:IfPol, l2:PortSecurityPol, lacp:IfPol, lldp:IfPol, mcp:IfPol, mon:Pol, qos:DppPol, qos:PfcIfPol, qos:SdIfPol, stormctrl:IfPol, stp:IfPol,
Relations: l1:RsAttEntityPCons, l1:RsCdpIfPolCons, l1:RsCeMonitorPolCons, l1:RsFcIfPolCons, l1:RsHIfPolCons, l1:RsIpv4MonitorPolCons, l1:RsIpv6MonitorPolCons, l1:RsL2IfPolCons, l1:RsL2PortSecurityCons, l1:RsLacpIfPolCons, l1:RsLldpIfPolCons, l1:RsMcpIfPolCons, l1:RsMonPolIfPolCons, l1:RsQosEgressDppIfPolCons, l1:RsQosIngressDppIfPolCons, l1:RsQosPfcIfPolCons, l1:RsQosSdIfPolCons, l1:RsStormctrlIfPolCons, l1:RsStpIfPolCons, l1:RtBrConf, l1:RtEncPhysRtdConf, l1:RtEthIf, l1:RtExtConf, l1:RtLsNodeToIf, l1:RtNodePortAtt, l1:RtPhysRtdConf, l1:RtSpanSrcToL1IfAtt, l1:RtToObservedEthIf, nw:RtPathToIf,


Inheritance
[V] nw:Item Ignore.
 ├
 		[V] nw:Conn A connection abstraction.
 
 		 ├
 		[V] nw:Ep A static endpoint.
 
 		 
 		 ├
 		[V] nw:ConnEp A connection endpoint abstraction.
 
 		 
 		 
 		 ├
 		[V] nw:If The interface information.
 
 		 
 		 
 		 
 		 ├
 		[V] l1:If An abstraction for a layer-1 interface in the system. The properties apply to all types of interfaces.
 
 		 
 		 
 		 
 		 
 		 ├
 		[V] l1:EthIf An abstraction of Ethernet interface properties that are common between Ethernet physical interfaces and aggregated interfaces.
 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		[V] cnw:AggrIf The aggregated interface assigned to the node cluster.
 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		[V] cnw:PhysIf The physical interface assigned to the node cluster.
 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		[V] l1:PhysIf The object that represents the Layer 1 physical Ethernet interface information object.
 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		[V] pc:AggrIf The aggregated interface, which is a collection of physical ports; aka port channel


Events


Faults 
                l1:EthIf:ReflectiveRelayCfgNotSupported


Fsms


Properties Summary
Defined in: l1:EthIf
l1:Bw
          scalar:Uint32 		bw  (l1:EthIf:bw)
           The bandwidth parameter for a routed interface, port channel, or subinterface.
l1:Delay
          scalar:Uint32 		delay  (l1:EthIf:delay)
           The administrative port delay time.
l1:Dot1qEtherType
          scalar:Enum16 		dot1qEtherType  (l1:EthIf:dot1qEtherType)
           The administrative port Dot1q ether-type. Dot1q Ether Type configures the TPID value in the VLAN tag field for packets received and sent by the interface.
l1:InheritBw
          scalar:Uint32 		inhBw  (l1:EthIf:inhBw)
           Administrative port inherit bandwidth
l1:IsReflectiveRelayCfgSupported
          scalar:Enum8 		isReflectiveRelayCfgSupported  (l1:EthIf:isReflectiveRelayCfgSupported)
           NO COMMENTS
l1:Layer
          scalar:Enum8 		layer  (l1:EthIf:layer)
           Administrative port layer
l1:LinkDebounce
          scalar:Uint16 		linkDebounce  (l1:EthIf:linkDebounce)
           Administrative port link debounce interval
l1:LinkLog
          scalar:Enum8 		linkLog  (l1:EthIf:linkLog)
           Administrative link logging enable
l1:Mdix
          scalar:Enum8 		mdix  (l1:EthIf:mdix)
           The administrative Mdix mode. The Medium-dependant interface crossover (Mdix) is when the interface automatically detects the required cable connection type (straight through or crossover) and configures the connection appropriately.
l1:Medium
          scalar:Enum8 		medium  (l1:EthIf:medium)
           The administrative port medium type.
l1:Mode
          scalar:Enum8 		mode  (l1:EthIf:mode)
           Administrative port mode
naming:Descr
          string:Basic 		pathSDescr  (l1:EthIf:pathSDescr)
           Overide Port Description
eqpt:PortT
          scalar:Enum16 		portT  (l1:EthIf:portT)
           Type of the port: Fabric vs Leaf
l1:PrioFlowCtrl
          scalar:Enum8 		prioFlowCtrl  (l1:EthIf:prioFlowCtrl)
           Priority flow control mode
scalar:Enum8 reflectiveRelayEn  (l1:EthIf:reflectiveRelayEn)
           Administrative port VEPA mode
address:MAC routerMac  (l1:EthIf:routerMac)
           The administrative router MAC address.
l1:SpanMode
          scalar:Enum8 		spanMode  (l1:EthIf:spanMode)
           Administrative port span mode
l1:TrunkLog
          scalar:Enum8 		trunkLog  (l1:EthIf:trunkLog)
           Administrative trunk logging enable
l1:PortUsage
          scalar:Bitmask32 		usage  (l1:EthIf:usage)
           The port usage type.
Defined in: l1:If
l1:AdminSt
          scalar:Enum8 		adminSt  (l1:If:adminSt)
           Administrative port state
l1:AutoNeg
          scalar:Enum8 		autoNeg  (l1:If:autoNeg)
           Administrative port auto-negotiation
l1:Mtu
          scalar:Uint32 		mtu  (l1:If:mtu)
           Administrative port mtu
l1:SnmpTrapSt
          scalar:Enum8 		snmpTrapSt  (l1:If:snmpTrapSt)
           Administrative port snmp trap state
l1:Speed
          scalar:Enum8 		speed  (l1:If:speed)
           Administrative port speed
l1:SwitchingSt
          scalar:Enum8 		switchingSt  (l1:If:switchingSt)
           Switching state
Defined in: nw:If
naming:Descr
          string:Basic 		descr  (nw:If:descr)
          
nw:IfId
          base:IfIndex 		id  (nw:If:id)
           An identifier .
Defined in: nw:Ep
naming:Name
          string:Basic 		name  (nw:Ep:name)
           Overrides:nw:Conn:name
           The name of the object.
Defined in: mo:TopProps
mo:ModificationChildAction
          scalar:Bitmask32 		childAction  (mo:TopProps:childAction)
           Delete or ignore. For internal use only.
reference:BinRef dn  (mo:TopProps:dn)
           A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.
reference:BinRN rn  (mo:TopProps:rn)
           Identifies an object from its siblings within the context of its parent object. The distinguished name contains a sequence of relative names.
mo:ModificationStatus
          scalar:Bitmask32 		status  (mo:TopProps:status)
           The upgrade status. This property is for internal use only.
Properties Detail

adminSt

Type: l1:AdminSt
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
Administrative port state
Constants
down 1 down Admin state shut
up 2 up Admin state up
DEFAULT down(1) down Admin state shut




autoNeg

Type: l1:AutoNeg
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
Administrative port auto-negotiation
Constants
on 1 on NO COMMENTS
off 2 off NO COMMENTS
DEFAULT on(1) on NO COMMENTS




bw

Type: l1:Bw
Primitive Type: scalar:Uint32

Units: kb
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The bandwidth parameter for a routed interface, port channel, or subinterface.
Constants
defaultValue 0u --- NO COMMENTS




childAction

Type: mo:ModificationChildAction
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelChildAction
    Comments:
Delete or ignore. For internal use only.
Constants
deleteAll 16384u deleteAll NO COMMENTS
ignore 4096u ignore NO COMMENTS
deleteNonPresent 8192u deleteNonPresent NO COMMENTS
DEFAULT 0 --- This type is used to




delay

Type: l1:Delay
Primitive Type: scalar:Uint32

Units: usec
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The administrative port delay time.
Constants
defaultValue 1u --- NO COMMENTS




descr

Type: naming:Descr
Primitive Type: string:Basic

Like: naming:Described:descr
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
    Comments:


dn

Type: reference:BinRef

Units: null
Encrypted: false
Access: implicit
Category: TopLevelDn
    Comments:
A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.


dot1qEtherType

Type: l1:Dot1qEtherType
Primitive Type: scalar:Enum16

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The administrative port Dot1q ether-type. Dot1q Ether Type configures the TPID value in the VLAN tag field for packets received and sent by the interface.
Constants
0x8100 1 0x8100 NO COMMENTS
0x88A8 2 0x88A8 NO COMMENTS
0x9100 3 0x9100 NO COMMENTS
any 4 any NO COMMENTS
DEFAULT 0x8100(1) 0x8100 NO COMMENTS




id

Type: nw:IfId
Primitive Type: base:IfIndex

Units: null
Encrypted: false
Access: create
Category: TopLevelRegular
    Comments:
An identifier .


inhBw

Type: l1:InheritBw
Primitive Type: scalar:Uint32

Units: kb
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
Administrative port inherit bandwidth
Constants
unspecified 0xffffffffu Unspecified NO COMMENTS
DEFAULT unspecified(0xffffffffu) Unspecified NO COMMENTS




isReflectiveRelayCfgSupported

Type: l1:IsReflectiveRelayCfgSupported
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
NO COMMENTS
Constants
Unsupported 0 Hardware does not support Reflective Relay Config NO COMMENTS
Supported 1 Hardware supports Reflective Relay Config NO COMMENTS
DEFAULT Supported(1) Hardware supports Reflective Relay Config NO COMMENTS




layer

Type: l1:Layer
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
Administrative port layer
Constants
Layer2 1 switched NO COMMENTS
Layer3 2 routed NO COMMENTS
DEFAULT Layer3(2) routed NO COMMENTS




linkDebounce

Type: l1:LinkDebounce
Primitive Type: scalar:Uint16

Units: msec
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
Administrative port link debounce interval
Constants
defaultValue 100 --- NO COMMENTS




linkLog

Type: l1:LinkLog
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
Administrative link logging enable
Constants
default 1 default NO COMMENTS
enable 2 enable NO COMMENTS
disable 3 disable NO COMMENTS
DEFAULT default(1) default NO COMMENTS




mdix

Type: l1:Mdix
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The administrative Mdix mode. The Medium-dependant interface crossover (Mdix) is when the interface automatically detects the required cable connection type (straight through or crossover) and configures the connection appropriately.
Constants
auto 1 auto NO COMMENTS
mdi 2 mdi NO COMMENTS
mdi-x 3 mdi-x NO COMMENTS
DEFAULT auto(1) auto NO COMMENTS




medium

Type: l1:Medium
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The administrative port medium type.
Constants
broadcast 1 broadcast NO COMMENTS
p2p 2 p2p NO COMMENTS
DEFAULT broadcast(1) broadcast NO COMMENTS




mode

Type: l1:Mode
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
Administrative port mode
Constants
unknown 0 unknown NO COMMENTS
access 1 access NO COMMENTS
trunk 2 trunk NO COMMENTS
fex-fabric 3 fex-fabric NO COMMENTS
qiq-tunnel-edgePort 4 qiq-tunnel-edgePort NO COMMENTS
qiq-tunnel-corePort 5 qiq-tunnel-corePort NO COMMENTS
DEFAULT trunk(2) trunk NO COMMENTS




mtu

Type: l1:Mtu
Primitive Type: scalar:Uint32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
Administrative port mtu
Constants
defaultValue 9000u --- NO COMMENTS




name

Type: naming:Name
Primitive Type: string:Basic

Overrides:nw:Conn:name

Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
    Comments:
The name of the object.


pathSDescr

Type: naming:Descr
Primitive Type: string:Basic

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
Overide Port Description


portT

Type: eqpt:PortT
Primitive Type: scalar:Enum16

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
Type of the port: Fabric vs Leaf
Constants
unknown 0 Unknown Invalid port type
eobc 1 EOBC Internal EOBC port
mgmt 2 Management Port Management port
fab 3 Fabric Port Fabric port
leaf 4 Access Port Front panel port
extchhp 5 Extended Chassis Host Port Extended chassis host port
extchfp 6 Extended Chassis Fabric Port Extended chassis fabric(uplink) port
DEFAULT unknown(0) Unknown Invalid port type




prioFlowCtrl

Type: l1:PrioFlowCtrl
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
Priority flow control mode
Constants
auto 0 Auto NO COMMENTS
off 1 Off NO COMMENTS
on 2 On NO COMMENTS
DEFAULT auto(0) Auto NO COMMENTS




reflectiveRelayEn

Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
Administrative port VEPA mode
Constants
off 0 Reflective Relay Off NO COMMENTS
on 1 Reflective Relay On NO COMMENTS
DEFAULT off(0) Reflective Relay Off NO COMMENTS




rn

Type: reference:BinRN

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRn
    Comments:
Identifies an object from its siblings within the context of its parent object. The distinguished name contains a sequence of relative names.


routerMac

Type: address:MAC

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The administrative router MAC address.
Constants
not-applicable 0ull N/A NO COMMENTS
DEFAULT not-applicable(0ull) N/A NO COMMENTS




snmpTrapSt

Type: l1:SnmpTrapSt
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
Administrative port snmp trap state
Constants
enable 1 enable NO COMMENTS
disable 2 disable NO COMMENTS
DEFAULT enable(1) enable NO COMMENTS




spanMode

Type: l1:SpanMode
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
Administrative port span mode
Constants
not-a-span-dest 1 not-a-span-dest NO COMMENTS
span-dest 2 span-dest NO COMMENTS
span-dest-fwd 3 span-dest-fwd NO COMMENTS
span-dest-fwd-learn 4 span-dest-fwd-learn NO COMMENTS
DEFAULT not-a-span-dest(1) not-a-span-dest NO COMMENTS




speed

Type: l1:Speed
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
Administrative port speed
Constants
unknown 0 Unspecified Speed is unknown
100M 1 100 Mbps Speed is 100 Mbps
1G 2 1 Gbps Speed is 1 Gbps
10G 3 10 Gbps Speed is 10 Gbps
25G 4 25 Gbps Speed is 25 Gbps
40G 5 40 Gbps Speed is 40 Gbps
100G 6 100 Gbps Speed is 100 Gbps
inherit 7 inherit Speed is Inherited
DEFAULT inherit(7) inherit Speed is Inherited




status

Type: mo:ModificationStatus
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelStatus
    Comments:
The upgrade status. This property is for internal use only.
Constants
created 2u created In a setter method: specifies that an object should be created. An error is returned if the object already exists.
In the return value of a setter method: indicates that an object has been created.
modified 4u modified In a setter method: specifies that an object should be modified
In the return value of a setter method: indicates that an object has been modified.
deleted 8u deleted In a setter method: specifies that an object should be deleted.
In the return value of a setter method: indicates that an object has been deleted.
DEFAULT 0 --- This type controls the life cycle of objects passed in the XML API.

When used in a setter method (such as configConfMo), the ModificationStatus specifies whether an object should be created, modified, deleted or removed.
In the return value of a setter method, the ModificationStatus indicates the actual operation that was performed. For example, the ModificationStatus is set to "created" if the object was created. The ModificationStatus is not set if the object was neither created, modified, deleted or removed.

When invoking a setter method, the ModificationStatus is optional:
If a setter method such as configConfMo is invoked and the ModificationStatus is not set, the system automatically determines if the object should be created or modified.





switchingSt

Type: l1:SwitchingSt
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
Switching state
Constants
disabled 0 disabled NO COMMENTS
enabled 1 enabled NO COMMENTS
DEFAULT disabled(0) disabled NO COMMENTS




trunkLog

Type: l1:TrunkLog
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
Administrative trunk logging enable
Constants
default 1 default NO COMMENTS
enable 2 enable NO COMMENTS
disable 3 disable NO COMMENTS
DEFAULT default(1) default NO COMMENTS




usage

Type: l1:PortUsage
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The port usage type.
Constants
out-of-service 128u Out Of Service NO COMMENTS
controller 16u Controller NO COMMENTS
discovery 1u Discovery NO COMMENTS
fabric-ext 256u Fabric External NO COMMENTS
epg 2u EPG NO COMMENTS
blacklist 32u Black listed NO COMMENTS
fabric 4u Fabric NO COMMENTS
span 64u Span NO COMMENTS
infra 8u Infra NO COMMENTS
DEFAULT discovery(1u) Discovery NO COMMENTS






Overview  Diagram  Inheritance  Events  Faults  FSMs  Properties Summary  Properties Detail