Fault fltMaintUpgJobFaultFailed

Rule ID:1480


Explanation:
This fault occurs when a software upgrade fails on a fabric node.

Recommended Action:
If you see this fault, take the following actions:

  1. Check the target firmware/software release notes whether the node hardware is supported by the particular release.
  2. Reboot the fabric node and retry the software installation using a policy upgrade.
  3. Reboot the fabric node and retry the software installation using the command line interface.
  4. If above actions did not resolve the issue, create a show tech-support file and contact Cisco TAC.

Raised on MO: maint:UpgJobFault

Fault Name: fltMaintUpgJobFaultFailed

Unqualified API Name: failed
Code: F1480
Applied Mo DN Format:
     topology/pod-[id]/node-[id]/sys/ctrlrfwstatuscont/upgjob/upgjobfault
     sys/ctrlrfwstatuscont/upgjob/upgjobfault
     topology/pod-[id]/node-[id]/sys/fwstatuscont/upgjob/upgjobfault
     sys/fwstatuscont/upgjob/upgjobfault

Type: operational
Cause: upgrade-failed
Severity: major
Weight: 100
Tags:
Message: Fabric node id failed to upgrade to desiredVersion. The upgrade has an upgrade status of upgradeStatus - upgradeStatusStr. The failure occured at the installStage stage of the install.

Help:

Triggered By:
         upgradeStatus equals completenok
        or
         upgradeStatus equals incompatible