Fault fltDppClassOperStFailed

Rule ID:2008


Explanation:
This fault occurs when DPP manager fails to activate a class due to hardware programming failure

Recommended Action:
To recover from this fault, try the following actions

  1. Look at any configuration issues
  2. Verify the configuration is correct/complete
  3. Delete the DPP class and add it back
  4. If the above actions did not resolve the issue, try rebooting the switch using CLI or GUI.
  5. If the above actions did not resolve the issue, generate the show tech-support file and contact Cisco TAC.

Raised on MO: dpp:Class

Fault Name: fltDppClassOperStFailed

Unqualified API Name: operStFailed
Code: F2008
Applied Mo DN Format:
     topology/pod-[id]/node-[id]/sys/dpp/classp-[name]
     sys/dpp/classp-[name]

Type: operational
Cause: dpp-resource-unavailable
Severity: major
Weight: 100
Tags:
Message: DPP class failed due to hardware programming error

Help:

Triggered By:
        operStQual equals hwprog-fail