Fault fltAcLatencyInstOperStFailed

Rule ID:2728


Explanation:
This fault occurs when latency feature is inactive.

Recommended Action:
To recover from this fault, try the following actions

  1. If the fault occurred because of PTP being disabled, enable PTP mode for latency to work.
  2. If the fault occurred because of PTP not supported, latency is not supported on this switch.
  3. If the fault occurred because of PTP bad correction, check if the PTP correction recovers in a few seconds. If it didnot resolve the issue, generate the show tech-support file and contact Cisco TAC.

Raised on MO: ac:LatencyInst

Fault Name: fltAcLatencyInstOperStFailed

Unqualified API Name: operStFailed
Code: F2728
Applied Mo DN Format:
     topology/pod-[id]/node-[id]/sys/ac/latencyinst
     sys/ac/latencyinst

Type: operational
Cause: latency-enable-failed
Severity: minor
Weight: 100
Tags:
Message: Latency feature is operSt because operStQual

Help:

Triggered By:
        operSt equals inactive