Overview  Diagram  Inheritance  Events  Faults  FSMs  Properties Summary  Properties Detail 

Class vns:ACCfgRel (ABSTRACT)

Class ID:4637
Class Label: Relation to L4-L7 Services Param Relation Abstract Class
Encrypted: false - Exportable: true - Persistent: true - Configurable: true - Subject to Quota: Disabled
Write Access: [admin, nw-svc-device, nw-svc-policy]
Read Access: [admin, nw-svc-device, nw-svc-policy]
Creatable/Deletable: yes (see Container Mos for details)
Possible Semantic Scopes: EPG, Fabric,
Semantic Scope Evaluation Rule: Subclasses
Monitoring Policy Source: Parent
Monitoring Flags : [ IsObservable: true, HasStats: false, HasFaults: true, HasHealth: true, HasEventRules: false ]

Abstract config parameter relation

Naming Rules 


DN FORMAT: 

        Too Many Containers: 133


Inheritance
[V] naming:NamedObject An abstract base class for an object that contains a name.
 ├
 		[V] vns:AL4L7ServiceFault An abstract base class for attaching faults on service managed objects.
 
 		 ├
 		[V] vns:ACCfg Contains a hierarchy of folders and parameters similar to AMItem.
 
 		 
 		 ├
 		[V] vns:ACCfgRel Abstract config parameter relation
 
 		 
 		 
 		 ├
 		[V] vns:AbsCfgRel The folder/param relations added to an abstract graph.
 
 		 
 		 
 		 ├
 		[V] vns:CRel A concrete relation.
 
 		 
 		 
 		 ├
 		[V] vns:CfgRelInst A folder instance configured by the administrator.
 
 		 
 		 
 		 ├
 		[V] vns:GRel A graph instance folder/parameter relation.


Events


Faults 
                vns:AL4L7ServiceFault:serviceCriticalFault

                vns:AL4L7ServiceFault:serviceMajorFault

                vns:AL4L7ServiceFault:serviceMinorFault

                vns:AL4L7ServiceFault:serviceWarningFault


Fsms


Properties Summary
Defined in: vns:ACCfgRel
scalar:Bool mandatory  (vns:ACCfgRel:mandatory)
           The value that indicates if this parameter is mandatory.
string:Basic targetName  (vns:ACCfgRel:targetName)
           The target to which this parameter applies.
Defined in: vns:ACCfg
vns:VnsCardinalityType
          scalar:Enum8 		cardinality  (vns:ACCfg:cardinality)
           A value to determine how many instances of this type can be present.
string:Basic key  (vns:ACCfg:key)
           The key uniquely identifying this configuration object.
scalar:Bool locked  (vns:ACCfg:locked)
           A property that specifies if a value entered at configuration time can be modified at run time.
reference:BinRef metaItemDn  (vns:ACCfg:metaItemDn)
           The distinguished name of the corresponding meta item.
naming:Name
          string:Basic 		name  (vns:ACCfg:name)
           Overrides:naming:NamedObject:name
           The name of the configuration parameter.
reference:BinRef srcDn  (vns:ACCfg:srcDn)
          
Defined in: vns:AL4L7ServiceFault
scalar:Uint32 faultCode  (vns:AL4L7ServiceFault:faultCode)
           The code corresponding to a service fault. The code characterizes information about the fault. The fault may be reported while updating a configuration or polling for health or counter values.
string:Basic faultMessage  (vns:AL4L7ServiceFault:faultMessage)
           The message returned with a service fault. The message provides descriptive information about the fault. The fault may be reported while updating a configuration or polling for health or counter values.
condition:Severity
          scalar:Enum8 		faultSeverity  (vns:AL4L7ServiceFault:faultSeverity)
           The severity of a service fault. The fault may be reported while updating a configuration or polling for health or counter values.
Defined in: naming:NamedObject
naming:NameAlias
          string:Basic 		nameAlias  (naming:NamedObject:nameAlias)
           NO COMMENTS
Defined in: mo:TopProps
mo:ModificationChildAction
          scalar:Bitmask32 		childAction  (mo:TopProps:childAction)
           Delete or ignore. For internal use only.
reference:BinRef dn  (mo:TopProps:dn)
           A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.
reference:BinRN rn  (mo:TopProps:rn)
           Identifies an object from its siblings within the context of its parent object. The distinguished name contains a sequence of relative names.
mo:ModificationStatus
          scalar:Bitmask32 		status  (mo:TopProps:status)
           The upgrade status. This property is for internal use only.
Properties Detail

cardinality

Type: vns:VnsCardinalityType
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
    Comments:
A value to determine how many instances of this type can be present.
Constants
unspecified 0 unspecified NO COMMENTS
1 1 1 NO COMMENTS
n 2 n NO COMMENTS
DEFAULT unspecified(0) unspecified NO COMMENTS




childAction

Type: mo:ModificationChildAction
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelChildAction
    Comments:
Delete or ignore. For internal use only.
Constants
deleteAll 16384u deleteAll NO COMMENTS
ignore 4096u ignore NO COMMENTS
deleteNonPresent 8192u deleteNonPresent NO COMMENTS
DEFAULT 0 --- This type is used to




dn

Type: reference:BinRef

Units: null
Encrypted: false
Access: implicit
Category: TopLevelDn
    Comments:
A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.


faultCode

Type: scalar:Uint32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Property Validators:
    Comments:
The code corresponding to a service fault. The code characterizes information about the fault. The fault may be reported while updating a configuration or polling for health or counter values.


faultMessage

Type: string:Basic

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Property Validators:
    Range:  min: "0"  max: "512"
    Comments:
The message returned with a service fault. The message provides descriptive information about the fault. The fault may be reported while updating a configuration or polling for health or counter values.


faultSeverity

Type: condition:Severity
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Property Validators:
    Comments:
The severity of a service fault. The fault may be reported while updating a configuration or polling for health or counter values.
Constants
cleared 0 cleared The Cleared severity level indicates the clearing of one or more previously reported alarms. This alarm clears all alarms for this managed object that have the same Alarm type, Probable cause and Specific problems (if given). Multiple associated notifications may be cleared by using the Correlated notifications parameter (defined below).
info 1 info NO COMMENTS
warning 2 warning The Warning severity level indicates the detection of a potential or impending service affecting fault, before any significant effects have been felt. Action should be taken to further diagnose (if necessary) and correct the problem in order to prevent it from becoming a more serious service affecting fault.
minor 3 minor The Minor severity level indicates the existence of a non-service affecting fault condition and that corrective action should be taken in order to prevent a more serious (for example, service affecting) fault. Such a severity can be reported, for example, when the detected alarm condition is not currently degrading the capacity of the managed object.
major 4 major The Major severity level indicates that a service affecting condition has developed and an urgent corrective action is required. Such a severity can be reported, for example, when there is a severe degradation in the capability of the managed object and its full capability must be restored.
critical 5 critical The Critical severity level indicates that a service affecting condition has occurred and an immediate corrective action is required. Such a severity can be reported, for example, when a managed object becomes totally out of service and its capability must be restored.
DEFAULT minor(3) minor The Minor severity level indicates the existence of a non-service affecting fault condition and that corrective action should be taken in order to prevent a more serious (for example, service affecting) fault. Such a severity can be reported, for example, when the detected alarm condition is not currently degrading the capacity of the managed object.




key

Type: string:Basic

Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
    Range:  min: "0"  max: "512"
    Comments:
The key uniquely identifying this configuration object.


locked

Type: scalar:Bool

Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
    Comments:
A property that specifies if a value entered at configuration time can be modified at run time.
Constants
no false --- NO COMMENTS
yes true --- NO COMMENTS
DEFAULT no(false) --- NO COMMENTS




mandatory

Type: scalar:Bool

Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
    Comments:
The value that indicates if this parameter is mandatory.
Constants
no false --- NO COMMENTS
yes true --- NO COMMENTS
DEFAULT no(false) --- NO COMMENTS




metaItemDn

Type: reference:BinRef

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The distinguished name of the corresponding meta item.


name

Type: naming:Name
Primitive Type: string:Basic

Overrides:naming:NamedObject:name

Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
    Range:  min: "1"  max: "64"
        Allowed Chars:
            Regex: [a-zA-Z0-9_.:-]+
    Comments:
The name of the configuration parameter.


nameAlias

Type: naming:NameAlias
Primitive Type: string:Basic

Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
    Range:  min: "0"  max: "63"
        Allowed Chars:
            Regex: [a-zA-Z0-9_.-]+
    Comments:
NO COMMENTS


rn

Type: reference:BinRN

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRn
    Comments:
Identifies an object from its siblings within the context of its parent object. The distinguished name contains a sequence of relative names.


srcDn

Type: reference:BinRef

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:


status

Type: mo:ModificationStatus
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelStatus
    Comments:
The upgrade status. This property is for internal use only.
Constants
created 2u created In a setter method: specifies that an object should be created. An error is returned if the object already exists.
In the return value of a setter method: indicates that an object has been created.
modified 4u modified In a setter method: specifies that an object should be modified
In the return value of a setter method: indicates that an object has been modified.
deleted 8u deleted In a setter method: specifies that an object should be deleted.
In the return value of a setter method: indicates that an object has been deleted.
DEFAULT 0 --- This type controls the life cycle of objects passed in the XML API.

When used in a setter method (such as configConfMo), the ModificationStatus specifies whether an object should be created, modified, deleted or removed.
In the return value of a setter method, the ModificationStatus indicates the actual operation that was performed. For example, the ModificationStatus is set to "created" if the object was created. The ModificationStatus is not set if the object was neither created, modified, deleted or removed.

When invoking a setter method, the ModificationStatus is optional:
If a setter method such as configConfMo is invoked and the ModificationStatus is not set, the system automatically determines if the object should be created or modified.





targetName

Type: string:Basic

Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
    Range:  min: "1"  max: "128"
    Comments:
The target to which this parameter applies.




Overview  Diagram  Inheritance  Events  Faults  FSMs  Properties Summary  Properties Detail