Fault fltVpcKeepaliveVpcCfgCtrl
                

Rule ID:1185

Explanation: This fault is caused by a hardware programming failure
Recommended Action: The system will periodically retry to program the hardware. If the failure is due to lack of hardware resources, free up resources by removing or simplifying existing configuration. One of the reasons for lack of hardware resources is exhaustion of VLANs in ToR. These hardware resources can be examined by looking at capacity dashboard under OPERATIONS tab. Please check entry against the number of VLANs in output of command show vlan summary issued at node where fault is generated to check whether it exceeds above advertised node capacity.

Fault Name: fltVpcKeepaliveVpcCfgCtrl

Unqualified API Name: vpcCfgCtrl
Code: F1185
Applied Mo DN Format:
     topology/pod-[id]/node-[id]/sys/vpc/inst/dom-[id]/keepalive
     sys/vpc/inst/dom-[id]/keepalive

Type: config
Cause: config-failure
Severity: warning
Weight: 100
Tags:
Message: vPC keepalive configuration failure

Help:

Triggered By:
        vpcCfgState not equals 0