Fault fltCoppFilterPrefilterInvalidConfig

Rule ID:2926


Explanation:
This fault occurs when CoPP prefilter ACL entry config is invalid.

Recommended Action:
To recover from this fault, try the following actions

  1. Look at any configuration issues.
  2. Verify the configuration is correct/complete.
  4. Delete the CoPP prefilter ACL entry and add it back with valid configuration.
  6. If the above actions did not resolve the issue, try rebooting the switch using CLI or GUI.

Raised on MO: copp:Filter

Fault Name: fltCoppFilterPrefilterInvalidConfig

Unqualified API Name: prefilterInvalidConfig
Code: F2926
Applied Mo DN Format:
     topology/pod-[id]/node-[id]/sys/copp/rulep-[name]-[type]/filter-[action]-prio-[prio]-proto-[ipProto]-src-[srcAddr]-dst-[dstAddr]-srcFromP-[srcPortFrom]-srcToP-[srcPortTo]-dstFromP-[dstPortFrom]-dstToP-[dstPortTo]
     sys/copp/rulep-[name]-[type]/filter-[action]-prio-[prio]-proto-[ipProto]-src-[srcAddr]-dst-[dstAddr]-srcFromP-[srcPortFrom]-srcToP-[srcPortTo]-dstFromP-[dstPortFrom]-dstToP-[dstPortTo]

Type: operational
Cause: copp-prefilter-acl-entry-installation-failed-due-to-invalid-config
Severity: major
Weight: 100
Tags:
Message: CoPP prefilter ACL entry installation failure reason:operStQual

Help:

Triggered By:
        operStQual equals invalid-config