Fault fltL1VethIfEthpmCfgCtrl
                

Rule ID:3055

Explanation: This fault is caused by a hardware programming failure
Recommended Action: The system will periodically retry to program the hardware. If the failure is due to lack of hardware resources, free up resources by removing or simplifying existing configuration. One of the reasons for lack of hardware resources is exhaustion of VLANs in ToR. These hardware resources can be examined by looking at capacity dashboard under OPERATIONS tab. Please check entry against the number of VLANs in output of command show vlan summary issued at node where fault is generated to check whether it exceeds above advertised node capacity.

Fault Name: fltL1VethIfEthpmCfgCtrl

Unqualified API Name: ethpmCfgCtrl
Code: F3055
Applied Mo DN Format:
     topology/pod-[id]/node-[id]/sys/veth/inst/veth-[id]
     sys/veth/inst/veth-[id]

Type: config
Cause: config-failure
Severity: warning
Weight: 100
Tags:
Message: Port configuration failure. Reason: ethpmCfgState Failed Config: ethpmCfgFailedBmp

Help:

Triggered By:
        ethpmCfgState not equals 0