Fault fltFabricSelectorIssuesConfig-failed

Rule ID:20


Explanation:
This fault occurs when a fabric selector (port selector, card selector, node selector etc.) is incorrectly configured.

Recommended Action:
If you see this fault, take the following actions:

  1. Look at the configuration for issues
  2. For invalid-port, check the fabric port selector, it should have only fabric ports in it. Leaf host ports and fex host ports are not allowed to be configured using fabric port selector.
  3. For port-configured-for-apic, check the fabric port selector. Port connected to the controller cannot be configured using fabric port selector.
  4. For invalid-card, check the fabric card selector, its referring to a card which does not exist. Fault will clear once the card is added to the node.
  5. For further details, refer to the documentation for fabric:SelectorIssues
  6. Verify the fabric selector configuration is correct and complete
  7. If the above action did not resolve the issue, create a tech-support file and contact Cisco TAC.

Raised on MO: fabric:SelectorIssues

Fault Name: fltFabricSelectorIssuesConfig-failed

Unqualified API Name: config-failed
Code: F0020
Applied Mo DN Format:
     topology/pod-[id]/node-[id]/local/svc-[name]-id-[id]/uni/fabric/spportp-[name]/spfabports-[name]-typ-[type]/selectorissues
     uni/fabric/spportp-[name]/spfabports-[name]-typ-[type]/selectorissues
     topology/pod-[id]/node-[id]/local/svc-[name]-id-[id]/uni/fabric/leportp-[name]/lefabports-[name]-typ-[type]/selectorissues
     uni/fabric/leportp-[name]/lefabports-[name]-typ-[type]/selectorissues
     topology/pod-[id]/node-[id]/local/svc-[name]-id-[id]/uni/fabric/spcardp-[name]/spcards-[type]/selectorissues
     uni/fabric/spcardp-[name]/spcards-[type]/selectorissues
     topology/pod-[id]/node-[id]/local/svc-[name]-id-[id]/uni/fabric/lecardp-[name]/lecards-[type]/selectorissues
     uni/fabric/lecardp-[name]/lecards-[type]/selectorissues
     topology/pod-[id]/node-[id]/local/svc-[name]-id-[id]/uni/fabric/spprof-[name]/spines-[name]-typ-[type]/selectorissues
     uni/fabric/spprof-[name]/spines-[name]-typ-[type]/selectorissues
     topology/pod-[id]/node-[id]/local/svc-[name]-id-[id]/uni/fabric/leprof-[name]/leaves-[name]-typ-[type]/selectorissues
     uni/fabric/leprof-[name]/leaves-[name]-typ-[type]/selectorissues

Type: config
Cause: configuration-failed
Severity: minor
Weight: 100
Tags:
Message: Configuration failed for node name due to configQualConfiguration failed for dn for node name due to configQual

Help:

Triggered By:
        configSt equals failed-to-apply