Fault fltDppIfOperStFailed
                

Rule ID:2107


Explanation:
This fault occurs when Data Plane Policer policy fails.

Recommended Action:
To recover from this fault, try the following actions


  1. If the fault occurred because of an usupported configuration, remove the configuration.
  2. If the fault occurred due to a hardware programming error, try removing and re-applying the policy.
  3. If the fault occurred because the interface on which it was applied is down, try bringing up the link.
  4. If the above actions did not resolve the issue, generate the show tech-support file and contact Cisco TAC.

Raised on MO: dpp:If

Fault Name: fltDppIfOperStFailed

Unqualified API Name: operStFailed
Code: F2107
Applied Mo DN Format:
     topology/pod-[id]/node-[id]/sys/dpp/classp-[name]/ckt-[l2CktEpDn]/if-[id]-[direction]
     sys/dpp/classp-[name]/ckt-[l2CktEpDn]/if-[id]-[direction]
     topology/pod-[id]/node-[id]/sys/dpp/classp-[name]/if-[id]-[direction]
     sys/dpp/classp-[name]/if-[id]-[direction]

Type: operational
Cause: dpp-config-error
Severity: major
Weight: 100
Tags:
Message: Data Plane Policer configuration failed at interface id on node id fabric hostname name. Reason: operStQual

Help:

Triggered By:
        operSt equals disabled