Fault fltInfraReplicaReplicaState

Rule ID:309


Explanation:
This fault occurs when a controller reports some data for service failed to initialize.

Recommended Action:
If you see this fault, take the following actions:

  1. Check cluster connectivity. All controllers need to be listed and reported as available. Check this by using the apic command show controller or by looking at System->Controller->First Controller->Cluster as Seen By Node
  2. Ensure that the cluster configuration is stable. Make note of any any frequent and brief interruptions of cluster availability or prolonged unavailability.
  3. If any controllers are missing from the cluster, check if those controllers are accessible via other means like ssh.
  4. Check for other faults related to cluster health and availability by looking at System->Faults Count By Domain->Infra
  5. If the above actions did not resolve the issue, create a tech-support file and contact Cisco TAC.

Raised on MO: infra:Replica

Fault Name: fltInfraReplicaReplicaState

Unqualified API Name: replicaState
Code: F0309
Applied Mo DN Format:
     topology/pod-[id]/node-[id]/lon/svc-[id]/rpl-[shrdId]-[rplId]

Type: operational
Cause: init-failure
Severity: critical
Weight: 100
Tags:
Message: Replica rplId in the internal database partition (shard) shrdId for the service name on controller id failed to initialize or failed to copy database snapshot from its peer.

Help:

Triggered By:
        state equals failed