Overview  Naming  Diagram  Containers  Contained  Inheritance  Events  Faults  FSMs  Properties Summary  Properties Detail 

Class fv:NwIssues (CONCRETE)

Class ID:2113
Class Label: Network Configuration Issues
Encrypted: false - Exportable: false - Persistent: true - Configurable: false - Subject to Quota: Disabled - Abstraction Layer: Logical Model - APIC NX Processing: Disabled
Write Access: [NON CONFIGURABLE]
Read Access: [admin]
Creatable/Deletable: no (see Container Mos for details)
Possible Semantic Scopes: EPG, Fabric,
Semantic Scope Evaluation Rule: Parent
Monitoring Policy Source: Parent
Monitoring Flags : [ IsObservable: true, HasStats: false, HasFaults: true, HasHealth: true, HasEventRules: false ]

The network configuration issues for each endpoint profile.

Naming Rules 
RN FORMAT: nwissues

    [1] PREFIX=nwissues


DN FORMAT: 

        Too Many Containers: 676


Containers Hierarchies
Too Many containers: 676


Contained Hierarchy
[V] fv:NwIssues The network configuration issues for each endpoint profile.
 ├
 		[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 ├
 		[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 ├
 		[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 		 ├
 		[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 		 ├
 		[V] tag:Annotation 
 
 		 ├
 		[V] tag:Tag 
 ├
 		[V] health:Inst A base class for a health score instance.(Switch only)


Inheritance
[V] naming:NamedObject An abstract base class for an object that contains a name.
 ├
 		[V] pol:Obj Represents a generic policy object.
 
 		 ├
 		[V] pol:Def Represents self-contained policy document.
 
 		 
 		 ├
 		[V] pol:AConfIssues The policy configuration issues.
 
 		 
 		 
 		 ├
 		[V] fv:AConfIssues The configuration issues found during the endpoint profile instrumentation in the node. This is an abstract class and cannot be instantiated.
 
 		 
 		 
 		 
 		 ├
 		[V] fv:AEpPConfIssues Configuration issues on an endpoint profile.
 
 		 
 		 
 		 
 		 
 		 ├
 		[V] fv:NwIssues The network configuration issues for each endpoint profile.


Events


Faults 
                fv:NwIssues:config-failed


Fsms


Properties Summary
Defined in: fv:NwIssues
fv:NwIssues
          scalar:Bitmask64 		configQual  (fv:NwIssues:configQual)
           The network configuration quality issues.
reference:BinRef monPolDn  (fv:NwIssues:monPolDn)
           The monitoring policy attached to this observable object.
fv:NwIssues
          scalar:Bitmask64 		tempConfigQual  (fv:NwIssues:tempConfigQual)
           An internal property for tracking temporary configuration qualifiers raised by the switch for policies pushed by APIC.
Defined in: fv:AEpPConfIssues
string:Basic debugMessage  (fv:AEpPConfIssues:debugMessage)
           Debug messages for the issues
fv:PrimKey
          reference:BinRef 		epgPKey  (fv:AEpPConfIssues:epgPKey)
          
scalar:Bool temporaryError  (fv:AEpPConfIssues:temporaryError)
          
Defined in: pol:AConfIssues
pol:ConfigSt
          scalar:Enum8 		configSt  (pol:AConfIssues:configSt)
          
Defined in: pol:Def
naming:Descr
          string:Basic 		descr  (pol:Def:descr)
           Specifies a description of the policy definition.
naming:Descr
          string:Basic 		ownerKey  (pol:Def:ownerKey)
           The key for enabling clients to own their data for entity correlation.
naming:Descr
          string:Basic 		ownerTag  (pol:Def:ownerTag)
           A tag for enabling clients to add their own data. For example, to indicate who created this object.
Defined in: pol:Obj
naming:Name
          string:Basic 		name  (pol:Obj:name)
           Overrides:naming:NamedObject:name
           null
Defined in: naming:NamedObject
naming:NameAlias
          string:Basic 		nameAlias  (naming:NamedObject:nameAlias)
           NO COMMENTS
Defined in: mo:Resolvable
mo:Owner
          scalar:Enum8 		lcOwn  (mo:Resolvable:lcOwn)
           A value that indicates how this object was created. For internal use only.
Defined in: mo:Modifiable
mo:TStamp
          scalar:Date 		modTs  (mo:Modifiable:modTs)
           The time when this object was last modified.
Defined in: mo:TopProps
mo:ModificationChildAction
          scalar:Bitmask32 		childAction  (mo:TopProps:childAction)
           Delete or ignore. For internal use only.
reference:BinRef dn  (mo:TopProps:dn)
           A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.
reference:BinRN rn  (mo:TopProps:rn)
           Identifies an object from its siblings within the context of its parent object. The distinguished name contains a sequence of relative names.
mo:ModificationStatus
          scalar:Bitmask32 		status  (mo:TopProps:status)
           The upgrade status. This property is for internal use only.
Properties Detail

childAction

Type: mo:ModificationChildAction
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelChildAction
    Comments:
Delete or ignore. For internal use only.
Constants
deleteAll 16384u deleteAll NO COMMENTS
ignore 4096u ignore NO COMMENTS
deleteNonPresent 8192u deleteNonPresent NO COMMENTS
DEFAULT 0 --- This type is used to




configQual

Type: fv:NwIssues
Primitive Type: scalar:Bitmask64

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The network configuration quality issues.
Constants
not-applicable 0ull N/A NO COMMENTS
tnlepg-accEncap-missing 0x1000000000000000ull AccEncap should be set for TnlEPG deployment on Core Port. Vlan Encap should be set to tunnel before TnlEPG deployment.
port-configured-for-breakout 0x100000000000000ull Interface Configured For Breakout Port configured for breakout
encap-mode-mismatch 0x10000000000000ull Different encap modes are not allowed for an encap on a given interface. Different encap modes are not allowed for an encap on a given interface
not-supported-with-egress-policy-enforcement-mode 0x1000000000000ull Not supported with VRFs Egress Policy Enforcement Mode Not Supprted with VRF's "egress" policy enforcement mode
def-rtleak-criteria-conflict 0x100000000000ull Different Default Route Leak Criterias for Context(VRF) Deployed on the Node from Different L3 Outsides Different Default Route Leak Criterias for Context(VRF) Deployed on the Node from Different L3 Outsides.
default-rt-leak-scope-conflict 0x10000000000ull L3 Outsides have Different Scopes for Default Route Leak Policies on the same Node For Given Context(VRF) on the same Node, All L3 Outsides must have same Scope for Default Route Leak Policy.
bgp-peer-profile-conflict 0x1000000000ull Same BGP Peer Profile for Context(VRF) is Deployed on the Node from Different L3 Outsides Same BGP Peer Profile for Context(VRF) is Deployed on the Node from Different L3 Outsides.
dest-is-member-of-pc-or-vpc 0x100000000ull SPAN Destination Cannot be PC or VPC Member SPAN validations
ip-address-already-in-use 0x10000000ull IP Address Already in Use IP-Address already in use
encap-port-mode-mismatch 0x2000000000000000ull Qinq Double Encaps can be deployed only on the trunk double encap ports and regular encaps cannot be deployed on such ports Port mode should be set to double encap port mode to deploy epgs with double encap
ipattr-already-in-use 0x200000000000000ull IP attribute already Used by another EPG IpAttr validation. an IpAttr can be used by only 1 EPg in a given l2BD
tnlepg-port-mode-mismatch 0x20000000000000ull Port mode should be set to tunnel for Tunnel deployment. Port mode should be set to tunnel before TnlEPG deployment.
interleak-policy-conflict 0x2000000000000ull Different Interleak Policies are Defined for Context(VRF) Deployed on the Node from Different L3 Outsides. Different Interleak Policies are Defined for Context(VRF) Deployed on the Node from Different L3 Outsides.
dns-not-supported-on-spine-inb 0x200000000000ull Inband DNS resolution not supported on spines. DNS on inb epg is not supported on spine.
qinq-double-tag-port-with-l2outs-or-l3outs 0x20000000000ull L2Outs or L3Outs cannot be deployed on qinq double tag ports. L2outs and L3outs cannot support double encap(qinq)
router-id-conflict 0x2000000000ull Different Router IDs for Context(VRF) Deployed on the Node from Different L3 Outsides Different Router IDs for Context(VRF) Deployed on the Node from Different L3 Outsides.
filter-entry-protocol-not-supported 0x200000000ull Filter Entry Unsupported Protocol Value Filter validations
invalid-ep-selection 0x20000000ull Spine Cannot Be Selected For this EP Invalid EP selection
bgpProt-policy-already-existing 0x4000000000000000ull A specific leaf node can hold only a single bgpProtP config; this fault is raised when inconsistent configuration is detected A specific leaf node can hold only a single bgpProtP config, this fault is raised when inconsistent configuration is detected
Cdp-tunneling-with-cdp-enabled-interface 0x400000000000000ull CDP on tunnel interface is not allowed when protocol mask is set to CDP This fault is raised when you enable CDP on a Tunnel Interface, on which CDP tunneling mask is already enabled
tnlepg-existing-on-port 0x40000000000000ull Only one Tunnel can be deployed on an edge port. Only one TnlEPG can be set on a port.
rtctrl-enforce-policy-conflict 0x4000000000000ull Different Route Control Enforcement Policies are Defined for Context(VRF) Deployed on the Node from Different L3 Outsides. Different Route Control Enforcement Policies are Defined for Context(VRF) Deployed on the Node from Different L3 Outsides.
IP-EPG-not-applicable-to-L2-only-BD 0x400000000000ull IP based EPG not applicable to L2 only BD. IP based EPG is not applicable to L2 only BD.
l3out-config-conflict 0x40000000000ull Operational interface parameters cannot be different (e.g. MTU, MAC, SVI Autostate) from different deployments under a context For a given port, catch and report conflicting properties coming from different l3outs
ospf-area-id-conflict 0x4000000000ull Same OSPF Area for Context(VRF) Deployed on the Node from Different Outsides Same OSPF Area for Context(VRF) Deployed on the Node from Different L3 Outsides.
invalid-contract-config 0x400000000ull Invalid Contract Configuration contract rule error
path-wiring-issues 0x40000000ull Path Wiring Issues Path has wiring issues The path (port/port-channel) getting referred has wiring-issues, which means the link is not connected to a supported peer.
multiple-mgmt-epg 0x4000000ull Multiple Management EPGs Configured For Node Multiple managment EPgs configured
epg-bd-mode-mismatch 0x8000000000000000ull A regular EPg with double encap(qinq) path caanot be supported under Legacy BD.These type of paths will be supported by the EPgswhen they are under Regular BDs Legacy BD will not supported for the EPgs having double encap Statis ports
Lldp-tunneling-with-lldp-enabled-interface 0x800000000000000ull LLDP on tunnel interface is not allowed when protocol mask is set to LLDP This fault is raised when you enable LLDP on a Tunnel Interface, on which LLDP tunneling mask is already enabled
Tnlport-with-regularEPGs 0x80000000000000ull Regular EPgs,l2Outs,L3outs cannot be deployed on the edge ports. Port mode change to tunnel not allowed if regular EPGs exist on the port.
dampening-policy-conflict 0x8000000000000ull Different Dampening Policies are Defined for Context(VRF) Deployed on the Node from Different L3 Outsides. Different Dampening Policies are Defined for Context(VRF) Deployed on the Node from Different L3 Outsides.
Qos-Policy-not-supported-for-IP-EPG 0x800000000000ull QoS Policy not supported for IP based EPG. Custom QoS Policy not supported for IP based EPG.
eigrp-multiple-out-conflict 0x80000000000ull EIGRP cannot be deployed on the same node and same context from multiple L3 Outsides For a given context(VRF) on the same Node, EIGRP cannot be enabled on more than one L3 Outside.
ospf-role-conflict 0x8000000000ull OSPF cannot be supporting protocol for BGP in one L3 Outside and Main protocol for another on same node for given Context(VRF) For Given Context(VRF) OSPF cannot be supporting protocol for BGP for one L3 Outside and Main protocol for some other L3 Outside on the same Node.
duplicate-encap 0x800000000ull Encap Is Already In Use. duplicate encap present on node.
l3port-and-sub-interface-on-path 0x80000000ull L3 Port and Sub-Interface Not Allowed on Same Path L3 Port and Sub-Interface are not allowed on the same path Under a Layer3 Outside, a pure layer3 port and sub-interface configurations are not allowed on the same port.
dhcp-provider-is-not-reachable 0x8000000ull DHCP Provider Not Present in Associated EPG/BD Subnet DHCP provider is not present in associated EPG/BD subnet
port-configured-for-fex 1024ull Interface Configured For FEX Port is configured as fex-fabric The path (i.e. port/port-channel) is currently getting used for attaching a FEX. Please check the Fex Profile (infra:FexP) and the port-selectors (infra:HPortS) associated to it.
invalid-exception-mask-for-subnet 1048576ull Exception Subnet Mask Must Be More Specific than Subnet Mask Route Control - L3 External Subnet/Exception validation
port-part-of-port-channel 128ull Port is Member of Port Channel Path is not available The configuration is directly referring to a port which is part of a port-channel. Such configurations may affect the behavior of the port-channel and hence are not allowed. Configuration should refer to the Access-Bundle-Group (infra:AccBndlGrp) directly.
missing-dhcp-lbl-for-infra 131072ull Infra DHCP relay profile is missing corresponding DHCP label DHCP validations
multiple-external-encap 16384ull Only One External Encap Allowed on Bridge Domain External Encap Validations A Bridge Domain (fv:BD) can be extended outside the fabric using only one external encap per node. Check the Layer 2 Outside configuration.
path-is-out-of-service 16777216ull Path Out of Service Path is Out of Service The path (port/port-channel) getting referred is marked Out-of-Service. Check the Out Of Service Policy (fabric:OOServicePol)
vxlan-capacity 16ull Insufficient VXLANs Available Not enough VXLANs available Check the total number of EPgs, BDs, VRFs etc. confgigurations which use a VXLAN Id. There total should not exceed the number of VXLANs supported.
bd-not-present 1ull BD Not Present BD Validations BD is not present on the node. Following issues are possible: 1. This could be a temporary issue as the BD could be in the process of getting pushed to the node. 2. If the EPg is associated with a default BD then check the Connectivity Instrumentation Policy.
port-configured-for-apic 2048ull Port Connected to Controller Port is configured for apic The path (i.e. port/port-channel) is currently getting used for APIC connection, hence no configurations are allowed on it which may bring down the connectivity with APIC
prefix-entry-already-in-use 2097152ull Prefix Entry Already Used in Another EPG Prefix Entry validation Under a Ctx (fvCtx aka VRF), a subnet can belong to only one external EPg at a time. Please check your external network instance profiles (l3ext:InstP) under the Layer3 Outside configurations.
port-configured-as-l3 256ull Interface Configured as L3 Path is configured as l3 The path (i.e. port/port-channel) is currently getting used by some configurations (example L3 Outside) which need the port to be configured as a Layer-3 port.
inconsistent-ibgp-peer-as-number 262144ull Inconsistent iBGP Peer AS number provided BGP Peer AS validations
context-not-present 2ull VRF Not Present Context Validations VRF is not present on the node. Following issues are possible: 1. This could be a temporary issue as the VRF could be in the process of getting pushed to the node. 2. If the EPg is associated with a default VRF then check the Connectivity Instrumentation Policy.
ip-address-not-present 32768ull IP Address Not Present IP-Address Validations
vrf-capacity 32ull Insufficient VRFs Available Not enough VRFs available Check the total number of Ctx(aka VRF) deployed on the node. The total should not exceed the number of VRF supported by the node.
invalid-vlan 33554432ull Invalid VLAN Configuration Invalid VLAN Configuration The domain associated with the EPg is not allowed to use the specified encap. Check the Attachable Profile, and VLAN/VXLAN Namespace (fvns:VlanInstP and fvns:VxlanInstP) configurations associated with the domain.
port-channel-capacity 4096ull Insufficient Port Channels Available Not enough port-channels available Check the total number of Access Bundle Groups (i.e. infra:AccBndlGrp) deployed on the node. The total number of port-channles created by the Access Bundle Groups should not exceed the total number of port-channels supported by the node.
encap-already-in-use 4194304ull Encap Already Used in Another EPG Encap validation On a node, an encap (VLAN or VXLAN) can be used by only 1 EPg or BD at a time.
insufficient-resources 4ull Insufficient Resources overall there are not enough resources
port-configured-as-l2 512ull Interface Configured as L2 Port is configured as l2 The path (i.e. port/port-channel) is currently getting used by some configurations (example L2 Outside, Application EPg) which need the port to be configured as a Layer-2 port.
invalid-bgp-peer-address 524288ull BGP Peer Address Cannot Be Same as Router ID BGP Peer Address validations
invalid-path 64ull Invalid Path Configuration Path is not available Following issues are possible: 1. The path (i.e. port/port-channel/Attachable-Profile/Loose-Node) getting referred does not exist on the node. 2. The domain associated with the EPg is not allowed to use the specified path. Check the Attachable Profile configuration associated with the domain. 3. The path (i.e. port/port-channel/Attachable-Profile/Loose-Node) is deployed on FEX and is part of l2Out/l3Out. l2Out and l3Out are NOT supported on FEX 4. L3Dom associated with the L3Out does not exist. Configure a valid L3 Domain and associate it with the L3Out.
multiple-ctx-configuration 65536ull Multiple VRF configuration provided for an encap or path Conflicting VRF validations A Layer-3 interface (which could be a pure-layer3 interface or a sub-interface) can belong to only 1 Ctx (fvCtx aka VRF) at a time. For pure-layer3 interface: Please check the Layer3 Outside configuration and make sure that for a given node same path (port/port-channel) is not part of multiple Layer3 Outsides associated to different fvCtxs. For sub-interface: Please check the Layer3 Outside configuration and make sure that for a given node the same encap is not part of multiple Layer3 Outsides associated to different fvCtxs.
native-or-untagged-encap-failure 8192ull Only One Native or Untagged Encap Allowed on Interface Native/Untagged Vlan Validation You are trying to configure two different encaps as native or untagged on the path (i.e. port/port-channel). Check the "mode" type set on the relations between the EPg and the fabric:Path.
multiple-outsides-from-context-configured-for-the-same-node 8388608ull Multiple External Networks From Same Context Configured For Same Node - Deprecated Multiple Outsides from the Same Context Configured for the Same Node Please check the Layer3 Outside configurations. Fault Deprecated - It's valid now.
vlan-capacity 8ull Insufficient VLANs Available Not enough VLANs available Check the total number of EPgs and BDs deployed on the node. There total should not exceed the number of VLANs supported by the node
DEFAULT not-applicable(0ull) N/A NO COMMENTS




configSt

Type: pol:ConfigSt
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
Constants
not-applied 0 not-applied Configuration is not applied.
applying 1 applying Configuration is getting applied.
applied 2 applied Configuration applied.
failed-to-apply 3 failed-to-apply Failed to apply configuration
temp-failed-to-apply 4 temp-failed-to-apply Temporary failure. No faults are raised for this kind of failure.
DEFAULT not-applied(0) not-applied Configuration is not applied.




debugMessage

Type: string:Basic

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
Debug messages for the issues


descr

Type: naming:Descr
Primitive Type: string:Basic

Like: naming:Described:descr
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
    Comments:
Specifies a description of the policy definition.


dn

Type: reference:BinRef

Units: null
Encrypted: false
Access: implicit
Category: TopLevelDn
    Comments:
A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.


epgPKey

Type: fv:PrimKey
Primitive Type: reference:BinRef

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:


lcOwn

Type: mo:Owner
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
A value that indicates how this object was created. For internal use only.
Constants
local 0 Local NO COMMENTS
policy 1 Policy NO COMMENTS
replica 2 Replica NO COMMENTS
resolveOnBehalf 3 ResolvedOnBehalf NO COMMENTS
implicit 4 Implicit NO COMMENTS
DEFAULT local(0) Local NO COMMENTS




modTs

Type: mo:TStamp
Primitive Type: scalar:Date

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The time when this object was last modified.
Constants
never 0ull never NO COMMENTS
DEFAULT never(0ull) never NO COMMENTS




monPolDn

Type: reference:BinRef

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The monitoring policy attached to this observable object.


name

Type: naming:Name
Primitive Type: string:Basic

Overrides:naming:NamedObject:name

Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
    Comments:
null


nameAlias

Type: naming:NameAlias
Primitive Type: string:Basic

Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
    Comments:
NO COMMENTS


ownerKey

Type: naming:Descr
Primitive Type: string:Basic

Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
    Comments:
The key for enabling clients to own their data for entity correlation.


ownerTag

Type: naming:Descr
Primitive Type: string:Basic

Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
    Comments:
A tag for enabling clients to add their own data. For example, to indicate who created this object.


rn

Type: reference:BinRN

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRn
    Comments:
Identifies an object from its siblings within the context of its parent object. The distinguished name contains a sequence of relative names.


status

Type: mo:ModificationStatus
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelStatus
    Comments:
The upgrade status. This property is for internal use only.
Constants
created 2u created In a setter method: specifies that an object should be created. An error is returned if the object already exists.
In the return value of a setter method: indicates that an object has been created.
modified 4u modified In a setter method: specifies that an object should be modified
In the return value of a setter method: indicates that an object has been modified.
deleted 8u deleted In a setter method: specifies that an object should be deleted.
In the return value of a setter method: indicates that an object has been deleted.
DEFAULT 0 --- This type controls the life cycle of objects passed in the XML API.

When used in a setter method (such as configConfMo), the ModificationStatus specifies whether an object should be created, modified, deleted or removed.
In the return value of a setter method, the ModificationStatus indicates the actual operation that was performed. For example, the ModificationStatus is set to "created" if the object was created. The ModificationStatus is not set if the object was neither created, modified, deleted or removed.

When invoking a setter method, the ModificationStatus is optional:
If a setter method such as configConfMo is invoked and the ModificationStatus is not set, the system automatically determines if the object should be created or modified.





tempConfigQual

Type: fv:NwIssues
Primitive Type: scalar:Bitmask64

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
An internal property for tracking temporary configuration qualifiers raised by the switch for policies pushed by APIC.
Constants
not-applicable 0ull N/A NO COMMENTS
tnlepg-accEncap-missing 0x1000000000000000ull AccEncap should be set for TnlEPG deployment on Core Port. Vlan Encap should be set to tunnel before TnlEPG deployment.
port-configured-for-breakout 0x100000000000000ull Interface Configured For Breakout Port configured for breakout
encap-mode-mismatch 0x10000000000000ull Different encap modes are not allowed for an encap on a given interface. Different encap modes are not allowed for an encap on a given interface
not-supported-with-egress-policy-enforcement-mode 0x1000000000000ull Not supported with VRFs Egress Policy Enforcement Mode Not Supprted with VRF's "egress" policy enforcement mode
def-rtleak-criteria-conflict 0x100000000000ull Different Default Route Leak Criterias for Context(VRF) Deployed on the Node from Different L3 Outsides Different Default Route Leak Criterias for Context(VRF) Deployed on the Node from Different L3 Outsides.
default-rt-leak-scope-conflict 0x10000000000ull L3 Outsides have Different Scopes for Default Route Leak Policies on the same Node For Given Context(VRF) on the same Node, All L3 Outsides must have same Scope for Default Route Leak Policy.
bgp-peer-profile-conflict 0x1000000000ull Same BGP Peer Profile for Context(VRF) is Deployed on the Node from Different L3 Outsides Same BGP Peer Profile for Context(VRF) is Deployed on the Node from Different L3 Outsides.
dest-is-member-of-pc-or-vpc 0x100000000ull SPAN Destination Cannot be PC or VPC Member SPAN validations
ip-address-already-in-use 0x10000000ull IP Address Already in Use IP-Address already in use
encap-port-mode-mismatch 0x2000000000000000ull Qinq Double Encaps can be deployed only on the trunk double encap ports and regular encaps cannot be deployed on such ports Port mode should be set to double encap port mode to deploy epgs with double encap
ipattr-already-in-use 0x200000000000000ull IP attribute already Used by another EPG IpAttr validation. an IpAttr can be used by only 1 EPg in a given l2BD
tnlepg-port-mode-mismatch 0x20000000000000ull Port mode should be set to tunnel for Tunnel deployment. Port mode should be set to tunnel before TnlEPG deployment.
interleak-policy-conflict 0x2000000000000ull Different Interleak Policies are Defined for Context(VRF) Deployed on the Node from Different L3 Outsides. Different Interleak Policies are Defined for Context(VRF) Deployed on the Node from Different L3 Outsides.
dns-not-supported-on-spine-inb 0x200000000000ull Inband DNS resolution not supported on spines. DNS on inb epg is not supported on spine.
qinq-double-tag-port-with-l2outs-or-l3outs 0x20000000000ull L2Outs or L3Outs cannot be deployed on qinq double tag ports. L2outs and L3outs cannot support double encap(qinq)
router-id-conflict 0x2000000000ull Different Router IDs for Context(VRF) Deployed on the Node from Different L3 Outsides Different Router IDs for Context(VRF) Deployed on the Node from Different L3 Outsides.
filter-entry-protocol-not-supported 0x200000000ull Filter Entry Unsupported Protocol Value Filter validations
invalid-ep-selection 0x20000000ull Spine Cannot Be Selected For this EP Invalid EP selection
bgpProt-policy-already-existing 0x4000000000000000ull A specific leaf node can hold only a single bgpProtP config; this fault is raised when inconsistent configuration is detected A specific leaf node can hold only a single bgpProtP config, this fault is raised when inconsistent configuration is detected
Cdp-tunneling-with-cdp-enabled-interface 0x400000000000000ull CDP on tunnel interface is not allowed when protocol mask is set to CDP This fault is raised when you enable CDP on a Tunnel Interface, on which CDP tunneling mask is already enabled
tnlepg-existing-on-port 0x40000000000000ull Only one Tunnel can be deployed on an edge port. Only one TnlEPG can be set on a port.
rtctrl-enforce-policy-conflict 0x4000000000000ull Different Route Control Enforcement Policies are Defined for Context(VRF) Deployed on the Node from Different L3 Outsides. Different Route Control Enforcement Policies are Defined for Context(VRF) Deployed on the Node from Different L3 Outsides.
IP-EPG-not-applicable-to-L2-only-BD 0x400000000000ull IP based EPG not applicable to L2 only BD. IP based EPG is not applicable to L2 only BD.
l3out-config-conflict 0x40000000000ull Operational interface parameters cannot be different (e.g. MTU, MAC, SVI Autostate) from different deployments under a context For a given port, catch and report conflicting properties coming from different l3outs
ospf-area-id-conflict 0x4000000000ull Same OSPF Area for Context(VRF) Deployed on the Node from Different Outsides Same OSPF Area for Context(VRF) Deployed on the Node from Different L3 Outsides.
invalid-contract-config 0x400000000ull Invalid Contract Configuration contract rule error
path-wiring-issues 0x40000000ull Path Wiring Issues Path has wiring issues The path (port/port-channel) getting referred has wiring-issues, which means the link is not connected to a supported peer.
multiple-mgmt-epg 0x4000000ull Multiple Management EPGs Configured For Node Multiple managment EPgs configured
epg-bd-mode-mismatch 0x8000000000000000ull A regular EPg with double encap(qinq) path caanot be supported under Legacy BD.These type of paths will be supported by the EPgswhen they are under Regular BDs Legacy BD will not supported for the EPgs having double encap Statis ports
Lldp-tunneling-with-lldp-enabled-interface 0x800000000000000ull LLDP on tunnel interface is not allowed when protocol mask is set to LLDP This fault is raised when you enable LLDP on a Tunnel Interface, on which LLDP tunneling mask is already enabled
Tnlport-with-regularEPGs 0x80000000000000ull Regular EPgs,l2Outs,L3outs cannot be deployed on the edge ports. Port mode change to tunnel not allowed if regular EPGs exist on the port.
dampening-policy-conflict 0x8000000000000ull Different Dampening Policies are Defined for Context(VRF) Deployed on the Node from Different L3 Outsides. Different Dampening Policies are Defined for Context(VRF) Deployed on the Node from Different L3 Outsides.
Qos-Policy-not-supported-for-IP-EPG 0x800000000000ull QoS Policy not supported for IP based EPG. Custom QoS Policy not supported for IP based EPG.
eigrp-multiple-out-conflict 0x80000000000ull EIGRP cannot be deployed on the same node and same context from multiple L3 Outsides For a given context(VRF) on the same Node, EIGRP cannot be enabled on more than one L3 Outside.
ospf-role-conflict 0x8000000000ull OSPF cannot be supporting protocol for BGP in one L3 Outside and Main protocol for another on same node for given Context(VRF) For Given Context(VRF) OSPF cannot be supporting protocol for BGP for one L3 Outside and Main protocol for some other L3 Outside on the same Node.
duplicate-encap 0x800000000ull Encap Is Already In Use. duplicate encap present on node.
l3port-and-sub-interface-on-path 0x80000000ull L3 Port and Sub-Interface Not Allowed on Same Path L3 Port and Sub-Interface are not allowed on the same path Under a Layer3 Outside, a pure layer3 port and sub-interface configurations are not allowed on the same port.
dhcp-provider-is-not-reachable 0x8000000ull DHCP Provider Not Present in Associated EPG/BD Subnet DHCP provider is not present in associated EPG/BD subnet
port-configured-for-fex 1024ull Interface Configured For FEX Port is configured as fex-fabric The path (i.e. port/port-channel) is currently getting used for attaching a FEX. Please check the Fex Profile (infra:FexP) and the port-selectors (infra:HPortS) associated to it.
invalid-exception-mask-for-subnet 1048576ull Exception Subnet Mask Must Be More Specific than Subnet Mask Route Control - L3 External Subnet/Exception validation
port-part-of-port-channel 128ull Port is Member of Port Channel Path is not available The configuration is directly referring to a port which is part of a port-channel. Such configurations may affect the behavior of the port-channel and hence are not allowed. Configuration should refer to the Access-Bundle-Group (infra:AccBndlGrp) directly.
missing-dhcp-lbl-for-infra 131072ull Infra DHCP relay profile is missing corresponding DHCP label DHCP validations
multiple-external-encap 16384ull Only One External Encap Allowed on Bridge Domain External Encap Validations A Bridge Domain (fv:BD) can be extended outside the fabric using only one external encap per node. Check the Layer 2 Outside configuration.
path-is-out-of-service 16777216ull Path Out of Service Path is Out of Service The path (port/port-channel) getting referred is marked Out-of-Service. Check the Out Of Service Policy (fabric:OOServicePol)
vxlan-capacity 16ull Insufficient VXLANs Available Not enough VXLANs available Check the total number of EPgs, BDs, VRFs etc. confgigurations which use a VXLAN Id. There total should not exceed the number of VXLANs supported.
bd-not-present 1ull BD Not Present BD Validations BD is not present on the node. Following issues are possible: 1. This could be a temporary issue as the BD could be in the process of getting pushed to the node. 2. If the EPg is associated with a default BD then check the Connectivity Instrumentation Policy.
port-configured-for-apic 2048ull Port Connected to Controller Port is configured for apic The path (i.e. port/port-channel) is currently getting used for APIC connection, hence no configurations are allowed on it which may bring down the connectivity with APIC
prefix-entry-already-in-use 2097152ull Prefix Entry Already Used in Another EPG Prefix Entry validation Under a Ctx (fvCtx aka VRF), a subnet can belong to only one external EPg at a time. Please check your external network instance profiles (l3ext:InstP) under the Layer3 Outside configurations.
port-configured-as-l3 256ull Interface Configured as L3 Path is configured as l3 The path (i.e. port/port-channel) is currently getting used by some configurations (example L3 Outside) which need the port to be configured as a Layer-3 port.
inconsistent-ibgp-peer-as-number 262144ull Inconsistent iBGP Peer AS number provided BGP Peer AS validations
context-not-present 2ull VRF Not Present Context Validations VRF is not present on the node. Following issues are possible: 1. This could be a temporary issue as the VRF could be in the process of getting pushed to the node. 2. If the EPg is associated with a default VRF then check the Connectivity Instrumentation Policy.
ip-address-not-present 32768ull IP Address Not Present IP-Address Validations
vrf-capacity 32ull Insufficient VRFs Available Not enough VRFs available Check the total number of Ctx(aka VRF) deployed on the node. The total should not exceed the number of VRF supported by the node.
invalid-vlan 33554432ull Invalid VLAN Configuration Invalid VLAN Configuration The domain associated with the EPg is not allowed to use the specified encap. Check the Attachable Profile, and VLAN/VXLAN Namespace (fvns:VlanInstP and fvns:VxlanInstP) configurations associated with the domain.
port-channel-capacity 4096ull Insufficient Port Channels Available Not enough port-channels available Check the total number of Access Bundle Groups (i.e. infra:AccBndlGrp) deployed on the node. The total number of port-channles created by the Access Bundle Groups should not exceed the total number of port-channels supported by the node.
encap-already-in-use 4194304ull Encap Already Used in Another EPG Encap validation On a node, an encap (VLAN or VXLAN) can be used by only 1 EPg or BD at a time.
insufficient-resources 4ull Insufficient Resources overall there are not enough resources
port-configured-as-l2 512ull Interface Configured as L2 Port is configured as l2 The path (i.e. port/port-channel) is currently getting used by some configurations (example L2 Outside, Application EPg) which need the port to be configured as a Layer-2 port.
invalid-bgp-peer-address 524288ull BGP Peer Address Cannot Be Same as Router ID BGP Peer Address validations
invalid-path 64ull Invalid Path Configuration Path is not available Following issues are possible: 1. The path (i.e. port/port-channel/Attachable-Profile/Loose-Node) getting referred does not exist on the node. 2. The domain associated with the EPg is not allowed to use the specified path. Check the Attachable Profile configuration associated with the domain. 3. The path (i.e. port/port-channel/Attachable-Profile/Loose-Node) is deployed on FEX and is part of l2Out/l3Out. l2Out and l3Out are NOT supported on FEX 4. L3Dom associated with the L3Out does not exist. Configure a valid L3 Domain and associate it with the L3Out.
multiple-ctx-configuration 65536ull Multiple VRF configuration provided for an encap or path Conflicting VRF validations A Layer-3 interface (which could be a pure-layer3 interface or a sub-interface) can belong to only 1 Ctx (fvCtx aka VRF) at a time. For pure-layer3 interface: Please check the Layer3 Outside configuration and make sure that for a given node same path (port/port-channel) is not part of multiple Layer3 Outsides associated to different fvCtxs. For sub-interface: Please check the Layer3 Outside configuration and make sure that for a given node the same encap is not part of multiple Layer3 Outsides associated to different fvCtxs.
native-or-untagged-encap-failure 8192ull Only One Native or Untagged Encap Allowed on Interface Native/Untagged Vlan Validation You are trying to configure two different encaps as native or untagged on the path (i.e. port/port-channel). Check the "mode" type set on the relations between the EPg and the fabric:Path.
multiple-outsides-from-context-configured-for-the-same-node 8388608ull Multiple External Networks From Same Context Configured For Same Node - Deprecated Multiple Outsides from the Same Context Configured for the Same Node Please check the Layer3 Outside configurations. Fault Deprecated - It's valid now.
vlan-capacity 8ull Insufficient VLANs Available Not enough VLANs available Check the total number of EPgs and BDs deployed on the node. There total should not exceed the number of VLANs supported by the node
DEFAULT not-applicable(0ull) N/A NO COMMENTS




temporaryError

Type: scalar:Bool

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
Constants
no false --- NO COMMENTS
yes true --- NO COMMENTS
DEFAULT no(false) --- NO COMMENTS






Overview  Naming  Diagram  Containers  Contained  Inheritance  Events  Faults  FSMs  Properties Summary  Properties Detail