Class nw:LogicalIf (ABSTRACT)

Class ID:3561
Class Label: Logical Interface
Encrypted: false - Exportable: false - Persistent: true - Configurable: false - Subject to Quota: Disabled - Abstraction Layer: Concrete Model - APIC NX Processing: Disabled
Write Access: [NON CONFIGURABLE]
Read Access: [admin]
Creatable/Deletable: no (see Container Mos for details)
Possible Semantic Scopes: EPG, Infra, Fabric,
Semantic Scope Evaluation Rule: Subclasses
Monitoring Policy Source: Parent
Monitoring Flags : [ IsObservable: false, HasStats: false, HasFaults: false, HasHealth: false, HasEventRules: false ]

DN FORMAT: 

                

Diagram

Super Mo: nw:If, Sub Mos: l2:FcIf, l2:If, l3:If, nw:ProtIf, regress:If, tunnel:If, Relations From: nw:PathEp, Relations: nw:RtPathToIf,

Inheritance

nw:Item Ignore.  ├ nw:Conn A connection abstraction.    ├ nw:Ep A static endpoint.      ├ nw:ConnEp A connection endpoint abstraction.        ├ nw:If The interface information.          ├ nw:LogicalIf A logical interface abstraction.            ├ l2:FcIf  Abstraction for a fiber channel interface in the system. The properties apply to all types of fiber channel interfaces              ├ l2:FcAggrIf  A san port channel interface properties              ├ l2:FcBrIf  An fiber channel interface properties              ├ l2:VfcIf  An fiber channel interface properties            ├ l2:If The layer 2 configured interface allows traffic of multiple VLANs over a single link and also extends VLANs across the network. All Layer 2 switching ports maintain MAC address tables.              ├ l2:BrIf The L2 bridged interface.              ├ l2:ExtIf The FEX fabric interface.              ├ l2:InbandIf The in-band interface.            ├ l3:If An abstract layer 3 interface.              ├ l3:EncRtdIf The routed interface corresponds to a sub-interface in Cisco?s routing terminology. A sub-interface is a logical L3 interface created on an underlying physical L3 port (the parent interface). Each sub-interface is associated with an 802.1Q VLAN tag. The traffic that comes on the parent interface with that tag is considered for that sub-interface. The existence of a routed interface under a VRF or infra VRF also implies that the interface belo...              ├ l3:LbRtdIf The routed loopback interface.              ├ l3:RtdIf A target relation to the routed concrete interface. This corresponds to a physical L3 interface. The existence of a routed concrete interface under a VRF or infra VRF also implies that interface belongs to that VRF. An L3 interface can belong to only one VRF at a time.              ├ mgmt:RtdMgmtIf Routed management interface              ├ svi:If A routed VLAN interface.            ├ nw:ProtIf A protocol interface abstraction.              ├ l1:ProtIf A protocol interface abstraction.              ├ l2:ProtIf A protocol interface abstraction.                ├ cdp:If CDP information that is operated at a interface level. CDP is used to obtain protocol addresses of neighboring devices and discover the platform of those devices. CDP is also used to display information about the neighboring interfaces/devices.                ├ dot1x:If  This object holds dot1x information that is operated at a interface level                ├ ipmcsnoop:If  This object holds IP Multicast snooping interface information that is operated at a interface                  ├ ipmcsnoop:StRtrIf  Multicast router if that is configured statically                    ├ igmpsnoop:StRtrIf This object represents the multicast router if that is configured statically.                    ├ mldsnoop:StRtrIf  Multicast router if that is configured statically                ├ lacp:If The LACP information that is operated at an interface (member port of the port channel) level.                ├ lldp:If The LLDP interface, which holds the operational states.                ├ macsec:AIf  This object holds macsec information that is operated at a interface level                  ├ macsec:FabIf                   ├ macsec:If                 ├ mcp:If The Mis-cabling Protocol (MCP) configured interface. The interface type can be physical Ethernet Interface or the Port-Channel Interface. The MCP packets are sent over the logic interfaces.                ├ poe:If  This object holds Power over Ethernet information that is operated at a interface level                ├ stp:If A container for the MCP information that is operated at a interface level.                ├ udld:If  This object holds udld information that is operated at a interface level              ├ l3:ProtIf A layer 3 protocol interface abstraction.                ├ arp:If The ARP Interface. This is configured to contain ARP specific interface information and contains statically configured adjacency endpoint(s).                ├ bfd:If  This object holds bfd interface information                ├ cloudsec:If  Cloudsec enabled l3 sub interface facing the external network                ├ dhcp:If The DHCP information that is operated at an interface level.                  ├ dhcp:ClientIf Used for showing client functionality on the interface.                  ├ dhcp:PseudoIf The Psuedo Interface definition.                  ├ dhcp:RelayIf DHCP relay if used for representing relay functionality on the interface.                  ├ dhcp:ServerIf DHCP server if not supported; defined for completeness.                ├ eigrp:If An EIGRP configured interface combines the benefits of distance vector protocols with the features of link-state protocols.                ├ hsrp:If  This object holds interface information                ├ icmp:If The ICMP information operated at the interface level.                  ├ icmpv4:If Internet Control Message Protocol (ICMPv4) information that is operated at the interface level.                ├ icmpv6:If Per Internet Control Message Protocol (ICMPv6) information that is operated at the interface level.                ├ igmp:ExtIf  This objects hold per igmp external interface information                ├ ip:If The IP information that is operated at an interface level.                  ├ ipv4:If A container for IPV4 information that is operated at an interface level.                  ├ ipv6:If The IPv6 interface information.                ├ ipmc:AIf  This object holds IP Multicast Routing interface information that is operated at a interface                  ├ igmp:If  This objects hold per igmp interface information                  ├ mld:If  This objects hold per mld interface information                ├ isis:ExtIf  This object holds isis information that is operated at a interface level, specific to external interfaces                ├ isis:If The ISIS interface holds ISIS information that is operated at an interface level.                ├ mld:ExtIf  This objects hold per mld external interface information                ├ nd:If The per ND protocol interface information.                ├ ospf:AIf An abstraction of the OSPF information that is operated at an interface level.                  ├ ospf:If The OSPF information that is operated at an interface level.                  ├ ospfv3:If An OSPF interface.                ├ ptp:If  This object holds interface information                ├ rtdmc:AIf  This object holds routed multicast information that is operated at a interface level                  ├ pim6:If  This object holds pim6 information that is operated at a interface level                  ├ pim:If PIM interface information.            ├ regress:If This is generated and used only by internal processes.            ├ tunnel:If A tunnel interface.

childAction

Type: mo:ModificationChildAction
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelChildAction

Delete or ignore. For internal use only.

descr

Type: naming:Descr
Primitive Type: string:Basic

Like: naming:Described:descr
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular

dn

Type: reference:BinRef

Units: null
Encrypted: false
Access: implicit
Category: TopLevelDn

A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.

id

Type: nw:IfId
Primitive Type: base:IfIndex

Units: null
Encrypted: false
Access: create
Category: TopLevelRegular

An identifier .

name

Type: naming:Name
Primitive Type: string:Basic

Overrides:nw:Conn:name

Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular

The name of the object.

rn

Type: reference:BinRN

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRn

Identifies an object from its siblings within the context of its parent object. The distinguished name contains a sequence of relative names.

status

Type: mo:ModificationStatus
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelStatus

The upgrade status. This property is for internal use only.