| Properties Summary |
| Defined in: vns:AL4L7ServiceFault |
|
scalar:Uint32
|
faultCode (vns:AL4L7ServiceFault:faultCode)
The code corresponding to a service fault. The code characterizes information about the fault. The fault may be reported while updating a configuration or polling for health or counter values.
|
|
string:Basic
|
faultMessage (vns:AL4L7ServiceFault:faultMessage)
The message returned with a service fault. The message provides descriptive information about the fault. The fault may be reported while updating a configuration or polling for health or counter values.
|
condition:Severity
scalar:Enum8
|
faultSeverity (vns:AL4L7ServiceFault:faultSeverity)
The severity of a service fault. The fault may be reported while updating a configuration or polling for health or counter values.
|
cardinality
Type: vns:VnsCardinalityType
Primitive Type: scalar:Enum8
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
Comments:
-
A value to determine how many instances of this type can be present.
| |
| Constants |
| unspecified |
0 |
unspecified |
NO COMMENTS
|
| 1 |
1 |
1 |
NO COMMENTS
|
| n |
2 |
n |
NO COMMENTS
|
| DEFAULT |
unspecified(0) |
unspecified |
NO COMMENTS
|
|
childAction
Type: mo:ModificationChildAction
Primitive Type: scalar:Bitmask32
Units: null
Encrypted: false
Access: implicit
Category: TopLevelChildAction
Comments:
-
Delete or ignore. For internal use only.
| |
| Constants |
| deleteAll |
16384u |
deleteAll |
NO COMMENTS
|
| ignore |
4096u |
ignore |
NO COMMENTS
|
| deleteNonPresent |
8192u |
deleteNonPresent |
NO COMMENTS
|
| DEFAULT |
0 |
--- |
This type is used to
|
|
dn
Type: reference:BinRef
Units: null
Encrypted: false
Access: implicit
Category: TopLevelDn
Comments:
-
A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.
faultCode
Type: scalar:Uint32
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Property Validators:
Comments:
-
The code corresponding to a service fault. The code characterizes information about the fault. The fault may be reported while updating a configuration or polling for health or counter values.
faultMessage
Type: string:Basic
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Property Validators:
Range: min: "0" max: "512"
Comments:
-
The message returned with a service fault. The message provides descriptive information about the fault. The fault may be reported while updating a configuration or polling for health or counter values.
faultSeverity
Type: condition:Severity
Primitive Type: scalar:Enum8
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Property Validators:
Comments:
-
The severity of a service fault. The fault may be reported while updating a configuration or polling for health or counter values.
| |
| Constants |
| cleared |
0 |
cleared |
The Cleared severity level indicates the clearing of one or more previously reported alarms. This
alarm clears all alarms for this managed object that have the same Alarm type, Probable cause and
Specific problems (if given). Multiple associated notifications may be cleared by using the Correlated
notifications parameter (defined below).
|
| info |
1 |
info |
NO COMMENTS
|
| warning |
2 |
warning |
The Warning severity level indicates the detection of a potential or impending service affecting
fault, before any significant effects have been felt. Action should be taken to further diagnose (if
necessary) and correct the problem in order to prevent it from becoming a more serious service affecting
fault.
|
| minor |
3 |
minor |
The Minor severity level indicates the existence of a non-service affecting fault condition and that
corrective action should be taken in order to prevent a more serious (for example, service affecting) fault.
Such a severity can be reported, for example, when the detected alarm condition is not currently
degrading the capacity of the managed object.
|
| major |
4 |
major |
The Major severity level indicates that a service affecting condition has developed and an urgent
corrective action is required. Such a severity can be reported, for example, when there is a severe
degradation in the capability of the managed object and its full capability must be restored.
|
| critical |
5 |
critical |
The Critical severity level indicates that a service affecting condition has occurred and an
immediate corrective action is required. Such a severity can be reported, for example, when a managed
object becomes totally out of service and its capability must be restored.
|
| DEFAULT |
minor(3) |
minor |
The Minor severity level indicates the existence of a non-service affecting fault condition and that
corrective action should be taken in order to prevent a more serious (for example, service affecting) fault.
Such a severity can be reported, for example, when the detected alarm condition is not currently
degrading the capacity of the managed object.
|
|
key
Type: string:Basic
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
Range: min: "0" max: "512"
Comments:
-
The key uniquely identifying this configuration object.
locked
Type: scalar:Bool
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
Comments:
-
A property that specifies if a value entered at configuration time can be modified at run time.
| |
| Constants |
| no |
false |
--- |
NO COMMENTS
|
| yes |
true |
--- |
NO COMMENTS
|
| DEFAULT |
no(false) |
--- |
NO COMMENTS
|
|
metaItemDn
Type: reference:BinRef
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
The distinguished name of the corresponding meta item.
name
Type: naming:Name
Primitive Type: string:Basic
Overrides:naming:NamedObject:name
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
Range: min: "1" max: "64"
Allowed Chars:
Regex: [a-zA-Z0-9_.:-]+
Comments:
-
The name of the configuration parameter.
nameAlias
Type: naming:NameAlias
Primitive Type: string:Basic
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
Range: min: "0" max: "63"
Allowed Chars:
Regex: [a-zA-Z0-9_.-]+
Comments:
-
NO COMMENTS
rn
Type: reference:BinRN
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRn
Comments:
-
Identifies an object from its siblings within the context of its parent object. The distinguished name contains a sequence of relative names.
srcDn
Type: reference:BinRef
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
status
Type: mo:ModificationStatus
Primitive Type: scalar:Bitmask32
Units: null
Encrypted: false
Access: implicit
Category: TopLevelStatus
Comments:
-
The upgrade status. This property is for internal use only.
| |
| Constants |
| created |
2u |
created |
In a setter method: specifies that an object should be created.
An error is returned if the object already exists.
In the return value of a setter method: indicates that an object has been created.
|
| modified |
4u |
modified |
In a setter method: specifies that an object should be modified
In the return value of a setter method: indicates that an object has been modified.
|
| deleted |
8u |
deleted |
In a setter method: specifies that an object should be deleted.
In the return value of a setter method: indicates that an object has been deleted.
|
| DEFAULT |
0 |
--- |
This type controls the life cycle of objects passed in the XML API.
When used in a setter method (such as configConfMo), the ModificationStatus
specifies whether an object should be created, modified, deleted or removed.
In the return value of a setter method, the ModificationStatus indicates the actual
operation that was performed. For example, the ModificationStatus is set to "created"
if the object was created. The ModificationStatus is not set if the object was neither
created, modified, deleted or removed.
When invoking a setter method, the ModificationStatus is optional:
If a setter method such as configConfMo is invoked and the ModificationStatus
is not set, the system automatically determines if the object should be created or modified.
|
|
![[V]](styles/eye.gif)