| Constants |
| none |
0x0ull |
None |
NO COMMENTS
|
| encapMode-mismatch |
0x1000000000ull |
VLAN is set to None for port group on VCenter but untagged access is not enabled for EPG |
NO COMMENTS
|
| portgroup-portallocation-mismatch |
0x100000000ull |
Portgroup Allocation type on DVS is different from that in the policy |
NO COMMENTS
|
| invalid-permission |
0x10000000ull |
Insufficient permission to create/modify port group |
NO COMMENTS
|
| netflow-afto-mismatch |
0x1000000ull |
Netflow VMM Exporter Active Flow TimeOut on DVS is different from that in the policy |
NO COMMENTS
|
| portgroup-netflowpref-changed |
0x100000ull |
Portgroup NetflowPref has been changed on external VMM controller |
NO COMMENTS
|
| portgroup-forgedtx-changed |
0x10000ull |
Portgroup Forged Transmits security policy has been changed on external VMM controller |
NO COMMENTS
|
| invalid-portgroup-name |
0x1000ull |
Port group name size is exceeding SCVMM VM Network Name size limit 64 character. |
NO COMMENTS
|
| lnode-name-mismatch |
0x100ull |
LNode(DVS) name mismatch |
NO COMMENTS
|
| event-channel-down |
0x10ull |
Event channel from external VMM controller is down. |
NO COMMENTS
|
| lnode-deleted |
0x1ull |
Lnode(DVS) deleted on external VMM controller |
NO COMMENTS
|
| invalid-uplink-config |
0x2000000000ull |
Uplinks ordered exceed the maxmimum number of uplinks on the DVS |
NO COMMENTS
|
| mtu-exceeded |
0x200000000ull |
Given MTU value exceeds the max MTU supported by vmware vCenter which is 9000 |
NO COMMENTS
|
| opflex-cert-expire |
0x20000000ull |
Opflex certificate is expiring or has expired |
NO COMMENTS
|
| netflow-ifto-mismatch |
0x2000000ull |
Netflow VMM Exporter Idle Flow TimeOut on DVS is different from that in the policy |
NO COMMENTS
|
| netflow-dstaddr-mismatch |
0x200000ull |
Netflow VMM Exporter Destination Address on DVS is different from that in the policy |
NO COMMENTS
|
| portgroup-pvlan-changed |
0x20000ull |
Portgroup PVLAN encapsulation has been changed on external VMM controller |
NO COMMENTS
|
| partial-inv |
0x2000ull |
Received partial inventory in the last inventory sync. Please look for Faults under VM and Host and fix them via VCenter, then manually re-trigger inventory sync on APIC |
NO COMMENTS
|
| vsmgmt-error |
0x200ull |
Vsmgmt port group missing in controller. |
NO COMMENTS
|
| connection-down |
0x20ull |
Connection to external VMM controller is down. |
NO COMMENTS
|
| portgroup-encap-changed |
0x2ull |
Portgroup encapsulation has been changed on external VMM controller |
NO COMMENTS
|
| numofuplinks-mismatch |
0x400000000ull |
Number of Uplinks on DVS is different from that in the policy |
NO COMMENTS
|
| portgroup-bindingtype-mismatch |
0x40000000ull |
Portgroup binding type on DVS is different from that in the policy |
NO COMMENTS
|
| netflow-sr-mismatch |
0x4000000ull |
Netflow VMM Exporter Sampling Rate on DVS is different from that in the policy |
NO COMMENTS
|
| netflow-dstport-mismatch |
0x400000ull |
Netflow VMM Exporter Destination Port on DVS is different from that in the policy |
NO COMMENTS
|
| inv-completed-ex |
0x40000ull |
Last inventory pull did not complete for a few hosts or VMs or no hosts found. Please verify the Hosts and VMs are in connected state in the VMM controller and manually re-trigger inventory sync on APIC. Please ignore this fault if there are no hosts in the VMM controller. |
NO COMMENTS
|
| portgroup-promiscuous-changed |
0x4000ull |
Portgroup Promiscuous security policy has been changed on external VMM controller |
NO COMMENTS
|
| ps-error |
0x400ull |
Powershell VMNetwork creation error. |
NO COMMENTS
|
| mtu-mismatch |
0x40ull |
MTU on DVS is different than the MTU in the policy. |
NO COMMENTS
|
| portgroup-deleted |
0x4ull |
Portgroup deleted from external VMM controller |
NO COMMENTS
|
| uplinkname-mismatch |
0x800000000ull |
Uplink names on DVS is different from that in the policy |
NO COMMENTS
|
| portgroup-numports-mismatch |
0x80000000ull |
Portgroup number of ports on DVS is different from that in the policy |
NO COMMENTS
|
| insufficient-mtu |
0x8000000ull |
Fabric mtu should be greater than 1550 for AVE/AVS VMM domain. |
NO COMMENTS
|
| netflow-srcaddr-mismatch |
0x800000ull |
Netflow VMM Exporter Source Address on DVS is different from that in the policy |
NO COMMENTS
|
| opflex-channels-down |
0x80000ull |
Both the opflex channels are down for the host. Please check the connections on the host. |
NO COMMENTS
|
| portgroup-macchange-changed |
0x8000ull |
Portgroup MAC Changes security policy has been changed on external VMM controller |
NO COMMENTS
|
| invalid-backing |
0x800ull |
Invalid backing port-group. |
NO COMMENTS
|
| discovery-protocol-mismatch |
0x80ull |
Discovery Protocol on DVS is different than the one in the policy. |
NO COMMENTS
|
| invalid-portgroup-exist |
0x8ull |
Invalid or Unknown portgroup exist on external VMM controller |
NO COMMENTS
|
| DEFAULT |
none(0x0ull) |
None |
NO COMMENTS
|