sla:UdpJitter
UDP Jitter Operation
Telemetry Sensor Path(s)
Configurable Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | PERMITTED VALUES |
|---|---|---|---|
| absoluteClockTolerance | sla:ClockToleranceAbsolute (scalar:Uint32) |
Oneway NTP Clock Tolerance absolute Value | RANGE: [0 , 100000] DEFAULT: 0 |
| advFactor | sla:AdvFactor (scalar:UByte) |
Advantage factor | RANGE: [0 , 20] DEFAULT: 0 |
| codecInterval | sla:Interval (scalar:Uint32) |
Interval between packets | RANGE: [4 , 60000] DEFAULT: 20 |
| codecNumPkts | sla:CodecNumPkts (scalar:Uint32) |
Number of packets per operation | RANGE: [1 , 60000] DEFAULT: 1000 |
| codecSize | sla:CodecSize (scalar:Uint32) |
Number of bytes per packet | RANGE: [16 , 16384] DEFAULT: 32 |
| codecType | sla:CodecType (scalar:Enum8) |
Codec Type | SELECTION: 0 - none 1 - g711ulaw 2 - g711alaw 3 - g729a DEFAULT: none |
| control | scalar:Bool |
To turn on/off Control Packets Exchanging mechanism between the sender and the responder, control is enabled by default. | SELECTION: true or false DEFAULT: true |
| destHostName | string:Basic |
Destination Host Name, if IP address is resolved from DNS server.Modifying this property is not allowed in case of icmp-echo probe. | A sequence of characters |
| destip | address:Ip |
Destination IP address which is tracked by the probe.This property is not applicable if the configured probe type is HTTP or DNS. Modifying this property is not allowed in case of icmp-echo probe. | Value must match ipv4 or ipv6 known format |
| distributionsOfStatsKept | scalar:Uint32 |
Maximum number of statistics distribution buckets to capture | RANGE: [1 , 20] DEFAULT: 1 |
| dstPort | scalar:Uint32 |
Destion UDP Port configuration for the UDP probe, it is must to configure the destination port. | RANGE: [0, 4294967295] |
| frequency | sla:Frequency (scalar:Uint32) |
Frequency of an operation - The interval at which the configured destination is tracked by the probe. Frequency in seconds(default value is 60). Minimum frequency value for an IP SLAs HTTP probe operation is 60 seconds but 1 second for other probes. | RANGE: [1 , 604800] DEFAULT: 60 |
| hoursOfStatsKept | scalar:Uint32 |
Maximum number of statistics hour groups to capture. | RANGE: [0 , 25] DEFAULT: 2 |
| interval | sla:Interval (scalar:Uint32) |
UDP Jitter Interval | RANGE: [4 , 60000] DEFAULT: 20 |
| ipTos | scalar:Uint32 |
TOS if the probe is tracking IPv4 destination and Traffic Class if the probe is tracking IPv6 destination. | RANGE: [0, 4294967295] |
| ipv6TrafficClass | scalar:Uint32 |
TOS if the probe is tracking IPv4 destination and Traffic Class if the probe is tracking IPv6 destination. | RANGE: [0, 4294967295] |
| numPkts | sla:NumPkts (scalar:Uint32) |
Number of packets per operation | RANGE: [1 , 60000] DEFAULT: 10 |
| operationPktPriority | sla:OpPktPriority (scalar:Enum8) |
Operation Packet Priority | SELECTION: 0 - none 1 - normal 2 - high DEFAULT: normal |
| owner | string:Basic |
Owner string of the probe(Max size 127) | A sequence of characters |
| percentClockTolerance | sla:ClockTolerancePercent (scalar:Uint32) |
Oneway NTP Clock Tolerance Value in percentage | RANGE: [0 , 100] DEFAULT: 0 |
| precision | sla:Precision (scalar:Enum8) |
Precision configuration | SELECTION: 1 - microseconds 2 - milliseconds DEFAULT: milliseconds |
| reqDataSize | sla:ReqDataSize (scalar:Uint32) |
Sets the protocol data size in the payload of an IP SLAs operation's request packet. | RANGE: [16 , 17512] DEFAULT: 32 |
| srcHostName | string:Basic |
Source Host Name, if IP address is resolved from DNS server. Modifying this property is not allowed. | A sequence of characters |
| srcPort | scalar:Uint32 |
Source UDP Port configuration for udp-jitter probe and if the srcPort is not configured, then source port will be used. | RANGE: [0, 4294967295] |
| srcip | address:Ip |
Source`IP address from which the configured destination is tracked by the probe. Modifying this property is not allowed. | Value must match ipv4 or ipv6 known format |
| statsDistributionInterval | scalar:Uint32 |
Statistics distribution interval size, if the precision configured is in milliseconds, then the unit is in milliseconds else if it is microseconds, then the unit is in microseconds. | RANGE: [1 , 100000] DEFAULT: 20 |
| tag | string:Basic |
User defined tag string (Max Size 127) | A sequence of characters |
| threshold | sla:Threshold (scalar:Uint32) |
Operation threshold - this is an upper limit for the observed RTT for the probe. RTT value of a probe exceeding the configured threshold will be marked with Overthreshold return code. | RANGE: [1 , 60000] DEFAULT: 5000 |
| timeout | sla:Timeout (scalar:Uint32) |
Timeout of an operation - this is the maximum wait time for completing the operation. The probe will be marked with Timeout return code. | RANGE: [1 , 604800000] DEFAULT: 5000 |
| verifyData | scalar:Bool |
Verify Data for Corruption. When data verification is enabled, each operation response is checked for corruption. Use the verify-data command with caution during normal operations because it generates unnecessary overhead. | SELECTION: true or false |
| vrf | l3:VrfName (string:Basic) |
vrf on which the probe is configured. | A sequence of characters DEFAULT: default |
Internal Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
| status | mo:ModificationStatus (scalar:Bitmask32) |
The upgrade status. This property is for internal use only. | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |