stp:Vlan

Vlan

Telemetry Sensor Path(s)
Configurable Properties
PROPERTY NAME DATA TYPE DESCRIPTION PERMITTED VALUES
adminSt nw:AdminSt
(scalar:Enum8)		 Admin State SELECTION:
1 - enabled
2 - disabled
DEFAULT: enabled
diameter stp:Diameter
(scalar:UByte)		 network diameter
RANGE: [2 , 7]
DEFAULT: 2
enabledIntf string:Basic
 Interfaces that have vlan cost/priority enabled A sequence of characters
fwdTime stp:FwdTime
(scalar:UByte)		 STP forward delay
RANGE: [4 , 30]
DEFAULT: 15
helloTime stp:HelloTime
(scalar:UByte)		 STP Hello interval
RANGE: [1 , 10]
DEFAULT: 2
id stp:VlanId
(scalar:Uint16)		 Access Encapsulation
RANGE: [1 , 4096]
DEFAULT: 1
maxAge stp:MaxAge
(scalar:UByte)		 STP max age interval
RANGE: [6 , 40]
DEFAULT: 20
priority stp:Priority
(scalar:Enum8)		 Bridge Priority SELECTION:
0 - 0
1 - 4096
2 - 8192
3 - 12288
4 - 16384
5 - 20480
6 - 24576
7 - 28672
8 - 32768
9 - 36864
10 - 40960
11 - 45056
12 - 49152
13 - 53248
14 - 57344
15 - 61440
DEFAULT: 32768
rootMode stp:RootMode
(scalar:Enum8)		 Bridge Root Config mode SELECTION:
0 - disabled
1 - enabled
DEFAULT: disabled
rootType stp:RootType
(scalar:Enum8)		 Bridge Root Type SELECTION:
0 - none
1 - primary
2 - secondary
DEFAULT: none
Operational Properties
PROPERTY NAME DATA TYPE DESCRIPTION POSSIBLE VALUES
bridgeAddress address:MAC
 Bridge ID: MAC address Value must match MM:MM:MM:SS:SS:SS format
bridgePriority scalar:Uint16
 Bridge ID: Priority with extended system ID RANGE: [0, 65535]
holdTime scalar:Uint32
 hold time for the tree RANGE: [0, 4294967295]
protocol stp:Protocol
(scalar:Enum8)		 Spanning tree protocol SELECTION:
0 - unknown
1 - mstp
2 - rstp
rootAddress address:MAC
 Root ID: MAC address Value must match MM:MM:MM:SS:SS:SS format
rootPathCost scalar:Uint32
 Root path cost RANGE: [0, 4294967295]
rootPort nw:IfId
(base:IfIndex)		 Root port name Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100
rootPortNumber scalar:Uint16
 Root port ID: Port number RANGE: [0, 65535]
rootPortPriority scalar:Uint16
 Root port ID: Priority RANGE: [0, 65535]
rootPriority scalar:Uint16
 Root ID: Priority RANGE: [0, 65535]
tcChangeTimer scalar:Uint32
 topology change timer RANGE: [0, 4294967295]
tcCount scalar:Uint32
 topology change count RANGE: [0, 4294967295]
tcDetected scalar:Uint32
 topology change detected flag RANGE: [0, 4294967295]
tcInitiator nw:IfId
(base:IfIndex)		 topology change initiator Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100
tcLast scalar:Time
 last topology change seconds TIME FORMAT: %H:%M:%S 54:05:07:26.000
tcTimeSinceLast scalar:Time
 topology change time since last in seconds TIME FORMAT: %H:%M:%S 54:05:07:26.000
topologyChange scalar:Uint32
 topology change flag RANGE: [0, 4294967295]
Internal Properties
PROPERTY NAME DATA TYPE DESCRIPTION POSSIBLE VALUES
modTs mo:TStamp
(scalar:Date)		 The time when this object was last modified. SELECTION:
0 - never
DEFAULT: never
status mo:ModificationStatus
(scalar:Bitmask32)		 The upgrade status. This property is for internal use only. SELECTION:
2 - created
4 - modified
8 - deleted
16 - replaced