netflow:Collector
It has the information about the netflow collector entity
Telemetry Sensor Path(s)
Configurable Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | PERMITTED VALUES |
|---|---|---|---|
| descr | netflow:Descr |
Collector Description | |
| dscp | netflow:flowDscp (qosp:DscpCP) |
DSCP Value of Remote Entity | RANGE: [0 , 63] DEFAULT: 0 |
| dstAddr | netflow:addressIp (address:Ip) |
Remote Entity IP | Value must match ipv4 or ipv6 known format |
| dstPort | netflow:flowPort (scalar:Uint16) |
Remote Entity L4 Port | RANGE: [0 , 0xffff] DEFAULT: 9995 |
| interfaceTimeout | netflow:CollTimeout (scalar:Uint32) |
Collector interface table timeout | RANGE: [0 , 86400] DEFAULT: 0 |
| name | pol:ObjName (naming:Name256) |
Object name | MAX SIZE: 64 |
| srcAddr | netflow:addressIp (address:Ip) |
Source IP Address of the sender | Value must match ipv4 or ipv6 known format |
| srcIf | nw:IfId (base:IfIndex) |
Source Interface of the sender | Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100 |
| statsTimeout | netflow:CollTimeout (scalar:Uint32) |
Collector stats timeout | RANGE: [0 , 86400] DEFAULT: 0 |
| templateTimeout | netflow:CollTemplateTimeout (scalar:Uint32) |
Collector template data timeout | RANGE: [1 , 86400] DEFAULT: 15 |
| ver | netflow:CollVersion (scalar:Enum8) |
Collector Version Format | SELECTION: 1 - v5 2 - v9 3 - cisco-v1 DEFAULT: v9 |
| vrfName | netflow:VrfName (l3:VrfName) |
Remote Entity VRF | DEFAULT: default |
Internal Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
| status | mo:ModificationStatus (scalar:Bitmask32) |
The upgrade status. This property is for internal use only. | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |