pc:AggrIf
The aggregated interface, which is a collection of physical ports; aka port channel
Telemetry Sensor Path(s)
Configurable Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | PERMITTED VALUES |
|---|---|---|---|
| accessVlan | l1:l1IfAccessVlan (base:Encap) |
Configured Access Vlan | SELECTION: unknown, vlan-%d or vxlan-%d DEFAULT: vlan-1 |
| adminSt | l1:AdminSt (scalar:Enum8) |
Administrative port state | SELECTION: 1 - down 2 - up DEFAULT: up |
| autoNeg | l1:AutoNeg (scalar:Enum8) |
Administrative port auto-negotiation | SELECTION: 1 - on 2 - off 3 - 25G DEFAULT: on |
| bw | l1:Bw (scalar:Uint32) |
The bandwidth parameter for a routed interface, port channel, or subinterface. | RANGE: [0 , 3200000000] DEFAULT: 0 |
| controllerId | aggregate:ControllerIdBitmap (base:BitArray) |
Controller ID | ARRAY SIZE: 256 |
| delay | l1:Delay (scalar:Uint32) |
The administrative port delay time. | RANGE: [1 , 16777215] DEFAULT: 1 |
| descr | naming:Descr1024 (string:Basic) |
descr | MAX SIZE: 254 |
| dot1qEtherType | l1:DDot1qEtherType (scalar:Uint32) |
The administrative port Dot1q ether-type. Dot1q Ether Type configures the TPID value in the VLAN tag field for packets received and sent by the interface. | RANGE: [1536 , 65535] DEFAULT: 0x8100 |
| duplex | l1:Duplex (scalar:Enum8) |
Duplex | SELECTION: 1 - auto 2 - full 3 - half DEFAULT: auto |
| gracefulConv | scalar:Enum8 |
Graceful Convergence | DEFAULT: enable |
| hashDist | pc:HashDist (scalar:Enum8) |
Hash distribution configured - adaptive/fixed | SELECTION: 0 - none 1 - adaptive 2 - fixed DEFAULT: none |
| inhBw | l1:InheritBw (scalar:Uint32) |
Administrative port inherit bandwidth | RANGE: [0 , 4294967295] DEFAULT: 4294967295 |
| isExplicit | scalar:Bool |
PC Created Explicitly | SELECTION: true or false DEFAULT: true |
| ituChannel | l1:ItuChannel (scalar:Uint32) |
ITU Channel to support DWDM XCVR | RANGE: [1 , 96] DEFAULT: 32 |
| lacpDelayMode | scalar:Enum8 |
Configuring LACP delay mode | DEFAULT: disable |
| lacpVpcConvergence | scalar:Enum8 |
LACP vpc convergence | DEFAULT: disable |
| layer | l1:Layer (scalar:Enum8) |
Administrative port layer | SELECTION: 1 - Layer2 2 - Layer3 DEFAULT: pltfmDfltLayer |
| linkDebounce | l1:LinkDebounce (scalar:Uint16) |
Administrative port link debounce interval | RANGE: [0 , 20000] DEFAULT: 100 |
| linkLog | l1:LinkLog (scalar:Enum8) |
Administrative link logging enable | SELECTION: 1 - default 2 - enable 3 - disable DEFAULT: default |
| loadDefer | scalar:Enum8 |
Load Defer Member Ports | DEFAULT: disable |
| maxLinks | pc:MaxLinks (scalar:Uint32) |
maximum links | RANGE: [1 , 32] DEFAULT: 32 |
| mdix | l1:Mdix (scalar:Enum8) |
The administrative Mdix mode. The Medium-dependant interface crossover (Mdix) is when the interface automatically detects the required cable connection type (straight through or crossover) and configures the connection appropriately. | SELECTION: 1 - auto 2 - mdi 3 - mdi-x DEFAULT: auto |
| medium | l1:Medium (scalar:Enum8) |
The administrative port medium type. | SELECTION: 1 - broadcast 2 - p2p DEFAULT: broadcast |
| minLinks | pc:MinLinks (scalar:Uint32) |
minimum links | RANGE: [1 , 32] DEFAULT: 1 |
| mode | l1:Mode (scalar:Enum8) |
Administrative port mode | SELECTION: 1 - access 2 - trunk 3 - fex-fabric 4 - dot1q-tunnel 5 - promiscuous 6 - host 7 - trunk_secondary 8 - trunk_promiscuous 9 - vntag DEFAULT: access |
| mtu | l1:Mtu (scalar:Uint32) |
Administrative port mtu | RANGE: [576 , 9216] DEFAULT: 1500 |
| name | naming:Name256 (string:Basic) |
The name of the object. | MAX SIZE: 63 |
| nativeVlan | l1:l1IfNativeVlan (base:Encap) |
Configured Native Vlan | SELECTION: unknown, vlan-%d or vxlan-%d DEFAULT: vlan-1 |
| pcId | pc:PcId (scalar:Uint16) |
Port channel id | RANGE: [0 , 65535] |
| pcMode | pc:Mode (scalar:Enum8) |
The aggregated interface protocol channel mode. | SELECTION: 0 - on 1 - static 2 - active 3 - passive 4 - mac-pin DEFAULT: on |
| portT | eqpt:PortT (scalar:Enum16) |
Type of the port: Fabric vs Leaf | SELECTION: 0 - unknown 1 - eobc 2 - mgmt 3 - fab 4 - leaf 5 - extchhp 6 - extchfp DEFAULT: unknown |
| routerMac | address:MAC |
The administrative router MAC address. | Value must match MM:MM:MM:SS:SS:SS format DEFAULT: not-applicable |
| snmpTrapSt | l1:SnmpTrapSt (scalar:Enum8) |
Administrative port snmp trap state | SELECTION: 1 - enable 2 - disable DEFAULT: enable |
| spanMode | l1:SpanMode (scalar:Enum8) |
Administrative port span mode | SELECTION: 1 - not-a-span-dest 2 - span-dest 3 - span-dest-fwd 4 - span-dest-fwd-learn DEFAULT: not-a-span-dest |
| speed | l1:Speed (scalar:Enum8) |
Administrative port speed | SELECTION: 0 - unknown 2 - 100M 3 - 1G 4 - 10G 5 - 40G 6 - auto 7 - auto 100M 8 - auto 100M 1G 9 - 100G 10 - 25G 11 - 10M 12 - 50G 13 - 200G 14 - 400G 15 - 2.5G 16 - 5G 17 - auto 2.5G 5G 10G 18 - auto 100M 1G 2.5G 5G DEFAULT: auto |
| suspIndividual | scalar:Enum8 |
Suspend Individual Port | DEFAULT: enable |
| trunkLog | l1:TrunkLog (scalar:Enum8) |
Administrative trunk logging enable | SELECTION: 1 - default 2 - enable 3 - disable DEFAULT: default |
| trunkVlans | l1:l1IfTrunkVlans (l2:VlanBitmap) |
Configed Trunk Vlans | DEFAULT: 1-4094 |
| usage | l1:PortUsage (scalar:Bitmask8) |
The port usage type. | SELECTION: 1 - discovery 2 - epg 4 - fabric 8 - infra 16 - controller 32 - blacklist DEFAULT: discovery |
| userCfgdFlags | l1:userCfgdFlags (scalar:Bitmask8) |
Port User Config Flags | SELECTION: 0 - none 1 - admin_state 2 - admin_layer 4 - admin_router_mac 8 - admin_dce_mode 16 - admin_mtu DEFAULT: none |
Operational Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| createTime | pc:Time (scalar:Time) |
Time of port-channel creation | TIME FORMAT: %H:%M:%S 54:05:07:26.000 |
| fop | nw:IfId (base:IfIndex) |
First operational port | Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100 |
| iod | pc:Iod (scalar:Uint32) |
Interface ordinal | RANGE: [0, 4294967295] |
| isExtendedPc | scalar:Bool |
Port-channel in extended pc region | SELECTION: true or false DEFAULT: false |
| lastBundleMbr | nw:IfId (base:IfIndex) |
Last member added | Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100 |
| lastBundleTime | pc:Time (scalar:Time) |
Time of last member addition | TIME FORMAT: %H:%M:%S 54:05:07:26.000 |
| lastSt | pc:LastSt (scalar:Enum8) |
Last status - successful/failed | SELECTION: 0 - successful 1 - failed |
| lastStCause | string:Basic |
Last status cause | A sequence of characters |
| lastTime | pc:Time (scalar:Time) |
Time when last status was set | TIME FORMAT: %H:%M:%S 54:05:07:26.000 |
| lastUnbundleMbr | nw:IfId (base:IfIndex) |
Last member removed | Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100 |
| lastUnbundleTime | pc:Time (scalar:Time) |
Time of last member removal | TIME FORMAT: %H:%M:%S 54:05:07:26.000 |
| lif | pc:Lif (scalar:Uint32) |
ELTM-allocated LIF | RANGE: [0, 4294967295] |
| loadDeferStartTime | pc:Time (scalar:Time) |
Time when first non-fop port came up | TIME FORMAT: %H:%M:%S 54:05:07:26.000 |
| ltl | pc:Ltl (scalar:Uint32) |
PIXM-allocated LTL | RANGE: [0, 4294967295] |
| maxActive | pc:MaxActive (scalar:Uint32) |
Max possible active members | RANGE: [0, 4294967295] |
| operChannelMode | pc:Mode (scalar:Enum8) |
Operational mode | SELECTION: 0 - on 1 - static 2 - active 3 - passive 4 - mac-pin DEFAULT: on |
| suspMinlinks | pc:SuspMinlinks (scalar:Bool) |
port-channel suspended due to min-links | SELECTION: true or false |
Internal Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| id | nw:IfId (base:IfIndex) |
An identifier . | Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100 |
| modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
| status | mo:ModificationStatus (scalar:Bitmask32) |
The upgrade status. This property is for internal use only. | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |