svi:If
A routed VLAN interface.
Telemetry Sensor Path(s)
Configurable Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | PERMITTED VALUES |
|---|---|---|---|
| adminSt | l1:AdminSt (scalar:Enum8) |
Administrative state | SELECTION: 1 - down 2 - up DEFAULT: down |
| autostate | scalar:Bool |
Autostate Enabled? | SELECTION: true or false DEFAULT: true |
| bw | svi:Bw (scalar:Uint32) |
Specifies the administrative port bandwidth. | RANGE: [1 , 400000000] DEFAULT: 1000000 |
| carDel | svi:CarrDelay (scalar:Uint32) |
The hold period for which carrier transition, such as L2 interfacing going down, is ignored. | RANGE: [0 , 60000] DEFAULT: 100 |
| ctrlrId | aggregate:ControllerIdBitmap (base:BitArray) |
Controller ID | ARRAY SIZE: 256 |
| delay | svi:Delay (scalar:Uint32) |
Specifies the administrative port delay. | RANGE: [1 , 16777215] DEFAULT: 1 |
| descr | naming:Descr1024 (string:Basic) |
Tunnel Description | MAX SIZE: 254 |
| inbMgmt | scalar:Bool |
An in-band management interface configuration. | SELECTION: true or false |
| loadIntvl1 | svi:LoadIntvl1 (scalar:Uint32) |
Load-averaging Interval 1 | RANGE: [60 , 600] DEFAULT: 60 |
| loadIntvl2 | svi:LoadIntvl2 (scalar:Uint32) |
Load-averaging Interval 2 | RANGE: [60 , 600] DEFAULT: 300 |
| loadIntvl3 | svi:LoadIntvl3 (scalar:Uint32) |
Load-averaging Interval 3 | RANGE: [60 , 600] DEFAULT: 60 |
| mac | address:MAC |
The MAC address. | Value must match MM:MM:MM:SS:SS:SS format |
| medium | svi:Medium (scalar:Enum8) |
Indicates the administrative port medium type. | SELECTION: 0 - bcast 1 - p2p DEFAULT: bcast |
| mtu | svi:Mtu (scalar:Uint32) |
The administrative MTU port on the aggregated interface. | RANGE: [64 , 9216] DEFAULT: 1500 |
| mtuInherit | scalar:Bool |
A property for specifying if the MTU is inherited from global policy. | SELECTION: true or false DEFAULT: true |
| name | naming:Name256 (string:Basic) |
The name of the object. | MAX SIZE: 63 |
| snmpTrap | scalar:Bool |
SNMP Trap Link Status Enabled? | SELECTION: true or false DEFAULT: true |
| vlanId | svi:VlanId (scalar:Uint16) |
The VLAN ID associated with the SVI. | RANGE: [0 , 4095] DEFAULT: 0 |
Operational Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| iod | scalar:Uint32 |
Specifies the IOD. | RANGE: [0, 4294967295] |
| operSt | svi:OperSt (scalar:Enum8) |
The runtime state of the object or policy. | SELECTION: 0 - unknown 1 - up 2 - down 3 - shutdown 4 - out-of-srvc DEFAULT: down |
| operStQual | svi:OperStQual (scalar:Enum8) |
The chassis operational status qualifier. | SELECTION: 0 - unknown 1 - admin-shut 2 - no-vlan 3 - bad-vlan_t 4 - vlan-down 5 - hwprog-flfm 6 - hwprog-fles 7 - oos 8 - reinit 9 - mtuprog-fail 10 - vrf-unusable 11 - l2st-change 12 - suspended 13 - macalloc-fail 14 - nonrouted-vdc 15 - int-vlan-create-fail 16 - inbMgmt-cfg-fail DEFAULT: unknown |
| vlanT | l2:DomType (scalar:Enum8) |
The VLAN type. | SELECTION: 1 - bd-regular 2 - bd-reserved 3 - bd-control 4 - bd-external 5 - ckt-vlan 6 - ckt-vxlan DEFAULT: bd-regular |
Internal Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| id | nw:IfId (base:IfIndex) |
An identifier . | Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100 |
| modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
| status | mo:ModificationStatus (scalar:Bitmask32) |
The upgrade status. This property is for internal use only. | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |