tunnelif:If

Tunnel Interface

Telemetry Sensor Path(s)
Configurable Properties
PROPERTY NAME DATA TYPE DESCRIPTION PERMITTED VALUES
adminSt l1:AdminSt
(scalar:Enum8)		 Administrative state SELECTION:
1 - down
2 - up
DEFAULT: down
descr naming:Descr1024
(string:Basic)		 Tunnel Description
MAX SIZE: 254
name naming:Name256
(string:Basic)		 The name of the object.
MAX SIZE: 63
snmpTrapSt tunnelif:SnmpTrapSt
(scalar:Enum8)		 Snmp Trap State SELECTION:
1 - enabled
2 - disabled
DEFAULT: enabled
tunBW tunnelif:TunnelBW
(scalar:Uint32)		 Tunnel Bandwidth
RANGE: [1 , 10000000]
DEFAULT: 9
tunDestAddr address:Ip
 Tunnel Destination Value must match ipv4 or ipv6 known format
tunMode tunnelif:TunnelMode
(scalar:Enum8)		 Tunnel Mode SELECTION:
1 - gre/ip
6 - gre/ipv6
7 - ipip/ip
8 - ipip/ipv6
9 - ipip/dcapany/ip
10 - ipip/dcapany/ipv6
11 - ipv6ip
12 - ipv6ip/dcapany
13 - ipv6ipv6
14 - ipv6ipv6/dcapany
DEFAULT: gre/ip
tunMtu tunnelif:TunnelMtu
(scalar:Uint32)		 Tunnel MTU
RANGE: [64 , 9196]
DEFAULT: 1476
tunPMTUD tunnelif:TunnelPMTUD
(scalar:Enum8)		 Tunnel PMTU Discovery SELECTION:
1 - enabled
2 - disabled
DEFAULT: disabled
tunPMTUage tunnelif:TunnelPMTUAge
(scalar:Uint32)		 Tunnel PMTU age
RANGE: [0 , 30]
DEFAULT: 10
tunSrcAddr address:Ip
 Tunnel Source Value must match ipv4 or ipv6 known format
tunSrcDirect tunnelif:TunnelSrcDirect
(scalar:Enum8)		 Tunnel Source SELECTION:
1 - enabled
2 - disabled
DEFAULT: disabled
tunSrcIntf nw:IfId
(base:IfIndex)		 Tunnel Source Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100
tunTTL tunnelif:TunnelTTL
(scalar:Uint32)		 Tunnel TTL
RANGE: [0 , 255]
DEFAULT: 0
tunVrf tunnelif:TunnelTransVRF
(l3:VrfName)		 Tunnel Transport VRF
DEFAULT: default
tunminPMTU tunnelif:TunnelminPMTU
(scalar:Uint32)		 Tunnel min PMTU
RANGE: [64 , 9196]
DEFAULT: 64
Operational Properties
PROPERTY NAME DATA TYPE DESCRIPTION POSSIBLE VALUES
lastCtrRstChgdTs scalar:Time
 Last Counters Reset Timestamp TIME FORMAT: %H:%M:%S 54:05:07:26.000
lastStateChgdTs scalar:Time
 Last State Change Timestamp TIME FORMAT: %H:%M:%S 54:05:07:26.000
tunDelInProg scalar:Bool
 Tunnel Deletion in Progress SELECTION: true or false
tunIfIndex scalar:Uint32
 Tunnel Interface Index RANGE: [0, 4294967295]
tunIfPmtu scalar:Uint32
 Tunnel Interface PMTU RANGE: [0, 4294967295]
tunIntfOptions tunnelif:TunnelOption
(scalar:Enum16)		 Tunnel Interface Options SELECTION:
0 - unknown
1 - del_on_fail
2 - usr_cfg_mtu
DEFAULT: unknown
tunIod scalar:Uint32
 Tunnel Interface Ordinal RANGE: [0, 4294967295]
tunOperSt tunnelif:TunnelOperSt
(scalar:Enum8)		 Tunnel Operational State SELECTION:
1 - up
2 - down
DEFAULT: down
tunOperStQual tunnelif:TunnelOperStQual
(scalar:Enum16)		 Tunnel Operational State Qualifier SELECTION:
0 - unknown
1 - none
2 - initing
3 - incomp-conf
4 - dup-conf
5 - no-mode
6 - admin-down
7 - src-down
8 - src-unres
9 - no-dest
10 - desip-unres
11 - dest-unreach
12 - vrf-mismatch
13 - vrf-fwdref
14 - vrf-down
15 - mtu-error
16 - hwprog-fail
17 - no-src
DEFAULT: unknown
tunRxBytes scalar:Uint64
 Tunnel Rx Bytes counter RANGE: [0, 18446744073709551615]
tunRxPackets scalar:Uint64
 Tunnel Rx Packet counter RANGE: [0, 18446744073709551615]
tunSrcIP address:Ip
 Tunnel Source IP Value must match ipv4 or ipv6 known format
tunTxBytes scalar:Uint64
 Tunnel Tx Bytes counter RANGE: [0, 18446744073709551615]
tunTxPackets scalar:Uint64
 Tunnel Tx Packet counter RANGE: [0, 18446744073709551615]
Internal Properties
PROPERTY NAME DATA TYPE DESCRIPTION POSSIBLE VALUES
id nw:IfId
(base:IfIndex)		 An identifier . Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100
modTs mo:TStamp
(scalar:Date)		 The time when this object was last modified. SELECTION:
0 - never
DEFAULT: never
status mo:ModificationStatus
(scalar:Bitmask32)		 The upgrade status. This property is for internal use only. SELECTION:
2 - created
4 - modified
8 - deleted
16 - replaced