pim:Route
Holds PIM Route, having Group and Source information
Telemetry Sensor Path(s)
- sys/pim/inst/dom-[name]/db-[type]/src-[src]-grp-[grp]
- sys/pim/inst/dom-[name]/if-[id]/db-[type]/src-[src]-grp-[grp]
Configurable Properties
PROPERTY NAME | DATA TYPE | DESCRIPTION | PERMITTED VALUES |
---|---|---|---|
assertMetric | scalar:Uint32 |
Assert metric | RANGE: [0, 4294967295] |
assertMetricPref | scalar:Uint32 |
Assert metric preference | RANGE: [0, 4294967295] |
grp | address:Ip |
Group | Value must match ipv4 or ipv6 known format |
name | naming:Name256 (string:Basic) |
The name of the object. | MAX SIZE: 63 |
rpAddrRoute | address:Ip |
Route RP addr | Value must match ipv4 or ipv6 known format |
src | address:Ip |
Source | Value must match ipv4 or ipv6 known format |
Operational Properties
PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
---|---|---|---|
hwByteCnt | rtdmc:ByteCntType (scalar:Uint32) |
Hardware Byte Count | RANGE: [0 , 0xffffffff] |
hwPktCnt | rtdmc:ByteCntType (scalar:Uint32) |
Hardware Packet Count | RANGE: [0 , 0xffffffff] |
iif | nw:IfId (base:IfIndex) |
Incoming interface | Must match first field in the output of show intf brief . Example: Eth1/1 or Vlan100 |
jpHoldTime | scalar:Uint32 |
JP Hold time | RANGE: [0, 4294967295] |
routeBits | rtdmc:RouteBits (scalar:Bitmask16) |
RP WC Bit | SELECTION: 1 - rp_bit 2 - wc_bit |
rpfNbr | address:Ip |
RPF Nbr Address | Value must match ipv4 or ipv6 known format |
rpfSrc | address:Ip |
RPF Source Address | Value must match ipv4 or ipv6 known format |
rtTimeOutInvtl | scalar:Uint32 |
Route Timeout Interval | RANGE: [0, 4294967295] |
rtType | rtdmc:RtFlags (scalar:Bitmask16) |
Route Uptime | SELECTION: 1 - attached 2 - static 4 - dataTrig 8 - stripeWinner 16 - fabricFwder 32 - rpfOverride |
swByteCnt | rtdmc:PktCntType (scalar:Uint32) |
Software Byte Count | RANGE: [0 , 0xffffffff] |
swPktCnt | rtdmc:PktCntType (scalar:Uint32) |
Software Packet Count | RANGE: [0 , 0xffffffff] |
ver | scalar:Uint32 |
Version | RANGE: [0, 4294967295] |
Internal Properties
PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
---|---|---|---|
modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
status | mo:ModificationStatus (scalar:Bitmask32) |
The upgrade status. This property is for internal use only. | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |