lacp:If
The LACP information that is operated at an interface (member port of the port channel) level.
Telemetry Sensor Path(s)
Configurable Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | PERMITTED VALUES |
|---|---|---|---|
| prio | lacp:PortPrio (scalar:Uint16) |
Specifies the LACP interface port priority. When there is a limitation that prevents all compatible ports from aggregating then the port priority should be set to standby mode. A higher port priority value means a lower priority for LACP. | RANGE: [1 , 65535] DEFAULT: 32768 |
| txRate | lacp:TxRate (scalar:Enum8) |
Specifies the rate at which the LACP packets are transmitted. | SELECTION: 1 - normal 2 - fast DEFAULT: normal |
Operational Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| activityFlags | lacp:ActivityFlags (scalar:Bitmask8) |
Specifies the LACP interface activity flags. | SELECTION: 1 - active 2 - short 4 - aggregate 8 - sync 16 - collect 32 - distribute 64 - defaulted 128 - expired |
| key | lacp:Key (scalar:Uint16) |
Specifies the LACP interface operational key. | RANGE: [0 , 65535] |
| lastActive | scalar:Date |
Indicates the last operationally active timestamp on the LACP interface. | DATE FORMAT: %Y-%m-%dT%H:%M:%S.%f%z |
| operMode | lacp:PortMode (scalar:Enum8) |
Specifies the LACP interface Operational Mode | SELECTION: 0 - invalid 1 - individual 2 - aggregate DEFAULT: invalid |
| operPrio | lacp:PortPrio (scalar:Uint16) |
Specifies the LACP interface operational port priority. | RANGE: [1 , 65535] DEFAULT: 32768 |
| port | lacp:PortNum (scalar:Uint16) |
Specifies the LACP interface local port number. | RANGE: [0 , 65535] |
Internal Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| id | nw:IfId (base:IfIndex) |
An identifier . | Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100 |
| modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
| status | mo:ModificationStatus (scalar:Bitmask32) |
The upgrade status. This property is for internal use only. | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |