itd:Nodev4
Telemetry Sensor Path(s)
Configurable Properties
PROPERTY NAME | DATA TYPE | DESCRIPTION | PERMITTED VALUES |
---|---|---|---|
adminState | itd:nodeAdminSt (scalar:Enum8) |
The destination policy administrative state. If enabled, the system uses the destination policy when an error matching the associated cause is encountered. Otherwise, the system ignores the policy even if a matching error occurs. By default, all policies are enabled. | SELECTION: 0 - noShut 1 - shut DEFAULT: noShut |
cluster | itd:ClusterIdType (scalar:Uint32) |
RANGE: [0 , 128] DEFAULT: 0 |
|
clusterDescription | naming:Descr (string:Basic) |
MAX SIZE: 128 |
|
holdDownThreshCount | itd:threshCountType (scalar:Uint32) |
RANGE: [0 , 10] DEFAULT: 0 |
|
holdDownThreshTime | itd:threshTimeType (scalar:Uint32) |
RANGE: [0 , 86400] DEFAULT: 0 |
|
mode | itd:nodeModeType (scalar:Enum8) |
The BGP Domain mode. | SELECTION: 0 - primary 1 - hot-standby DEFAULT: primary |
port | address:PortNumber (scalar:Uint16) |
The service port number for the LDAP service. | RANGE: [0 , 65535] |
weight | scalar:Uint32 |
The weight of the fault in calculating the health score of an object. A higher weight causes a higher degradation of the health score of the affected object. | RANGE: [0, 4294967295] |
Operational Properties
PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
---|---|---|---|
propFaultBitmap | itd:nodeFaultBitmapT (scalar:Bitmask64) |
Error state for the IPV4 nodes. | SELECTION: 1 - node-conf-err 2 - node-dg-rid-miss-err 4 - node-dg-miss-err 8 - node-dg-active-err 16 - node-ip-missing-err 32 - node-missing-err 64 - node-max-limit-err 128 - node-ip-type-mismatch-err 256 - node-v6-probe-err 512 - node-weight-standby-err 1024 - node-standby-hot-standby-err 2048 - node-max-dg-weight-err |
Internal Properties
PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
---|---|---|---|
ip | address:IPv4 |
The IP address. | Value must match ipv4 format |
modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
status | mo:ModificationStatus (scalar:Bitmask32) |
The upgrade status. This property is for internal use only. | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |