itd:StandbyNodev4

Telemetry Sensor Path(s)

Configurable Properties
PROPERTY NAME DATA TYPE DESCRIPTION PERMITTED VALUES
adminState itd:nodeAdminSt
(scalar:Enum8)
The destination policy administrative state. If enabled, the system uses the destination policy when an error matching the associated cause is encountered. Otherwise, the system ignores the policy even if a matching error occurs. By default, all policies are enabled. SELECTION:
0 - noShut
1 - shut
DEFAULT: noShut
holdDownThreshCount itd:threshCountType
(scalar:Uint32)
RANGE: [0 , 10]
DEFAULT: 0
holdDownThreshTime itd:threshTimeType
(scalar:Uint32)
RANGE: [0 , 86400]
DEFAULT: 0

Operational Properties
PROPERTY NAME DATA TYPE DESCRIPTION POSSIBLE VALUES
propFaultBitmap itd:standbyNodeFaultBitmapT
(scalar:Bitmask64)
Error state for the standby IPV4 nodes. SELECTION:
1 - standby-conf-err
2 - standby-dg-rid-miss-err
4 - standby-dg-miss-err
8 - standby-dg-active-err
16 - standby-ip-missing-err
32 - standby-missing-err
64 - standby-no-hotstandby-err
128 - standby-ip-type-mismatch-err
256 - standby-node-missing-err
512 - standby-max-limit-err
1024 - standby-node-ip-match-err

Internal Properties
PROPERTY NAME DATA TYPE DESCRIPTION POSSIBLE VALUES
ip address:IPv4
The IP address. Value must match ipv4 format
modTs mo:TStamp
(scalar:Date)
The time when this object was last modified. SELECTION:
0 - never
DEFAULT: never
status mo:ModificationStatus
(scalar:Bitmask32)
The upgrade status. This property is for internal use only. SELECTION:
2 - created
4 - modified
8 - deleted
16 - replaced