ipfib:MplsNextHopInfo

NextHop adjacency information for label entries

Telemetry Sensor Path(s)
Configurable Properties
PROPERTY NAME DATA TYPE DESCRIPTION PERMITTED VALUES
name naming:Name256
(string:Basic)		 The name of the object.
MAX SIZE: 63
nhAddr address:Ip
 NextHop IP address. It could be a connected or a remote Next Hop Value must match ipv4 or ipv6 known format
Operational Properties
PROPERTY NAME DATA TYPE DESCRIPTION POSSIBLE VALUES
nhIntf nw:IfId
(base:IfIndex)		 NextHop Interface ID. The port on the switch where the next hop ip address is learnt Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100
outLabel string:Basic
 Outgoing label Stack for MPLS next hops A sequence of characters
outOperation ipfib:OutOperEnum
(scalar:Enum8)		 Operation performed on outgoing packets for MPLS next hops. Push/Swap/Pop SELECTION:
0 - DEFAULT
1 - PUSH
2 - SWAP
3 - POP
DEFAULT: DEFAULT
partialInst string:Basic
 Identifies if the route is partially installed A sequence of characters
routeType ipfib:SpecialAdj
(scalar:Enum8)		 Special route type. Marks if its a drop/direct/supervisor route SELECTION:
0 - DEFAULT
1 - ATTACHED
2 - RECEIVE
3 - DROP
DEFAULT: DEFAULT
Internal Properties
PROPERTY NAME DATA TYPE DESCRIPTION POSSIBLE VALUES
modTs mo:TStamp
(scalar:Date)		 The time when this object was last modified. SELECTION:
0 - never
DEFAULT: never
status mo:ModificationStatus
(scalar:Bitmask32)		 The upgrade status. This property is for internal use only. SELECTION:
2 - created
4 - modified
8 - deleted
16 - replaced