isis:Dom
The IS-IS domain (vrf) information.
Telemetry Sensor Path(s)
Configurable Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | PERMITTED VALUES |
|---|---|---|---|
| adminSt | nw:AdminSt (scalar:Enum8) |
Holds ISIS Domain Administative state | SELECTION: 1 - enabled 2 - disabled DEFAULT: enabled |
| authCheckLvl1 | scalar:Bool |
Authentication Check for ISIS DOM on Level-1 | SELECTION: true or false DEFAULT: yes |
| authCheckLvl2 | scalar:Bool |
Authentication Check for ISIS DOM on Level-2 | SELECTION: true or false DEFAULT: yes |
| authKeyLvl1 | isis:AuthKeyN (string:Basic) |
Holds Authentication Key for ISIS DOM on Level-1 | A sequence of characters |
| authKeyLvl2 | isis:AuthKeyN (string:Basic) |
Holds Authentication Key for ISIS DOM on Level-2 | A sequence of characters |
| authTypeLvl1 | isis:AuthT (scalar:Enum8) |
Holds ISIS DOM Authentication-Type for Level-1 | SELECTION: 1 - clear 2 - md5 3 - unknown DEFAULT: unknown |
| authTypeLvl2 | isis:AuthT (scalar:Enum8) |
Holds ISIS DOM Authentication-Type for Level-2 | SELECTION: 1 - clear 2 - md5 3 - unknown DEFAULT: unknown |
| bwRef | isis:BwRef (scalar:Uint32) |
The IS-IS domain bandwidth reference. This sets the default reference bandwidth used for calculating the IS-IS cost metric. | RANGE: [0, 4294967295] DEFAULT: 40000 |
| bwRefUnit | isis:BwRefUnit (scalar:Enum8) |
Holds ISIS Domain Bandwidth Reference Unit (Mbps or Gbps) | SELECTION: 0 - mbps 1 - gbps DEFAULT: mbps |
| ctrl | isis:DomControl (scalar:Bitmask8) |
Holds ISIS Domain Control messages | SELECTION: 0 - unspecified 1 - log-adj-changes 2 - hostname-dynamic-disable DEFAULT: unspecified |
| isType | isis:IsT (scalar:Enum8) |
Holds ISIS Domain IS[Level] Type | SELECTION: 1 - l1 2 - l2 3 - l12 DEFAULT: l12 |
| lspLifetime | isis:MaxLSPLife (scalar:Uint32) |
Holds ISIS Domain LSP Lifetime | RANGE: [1 , 65535] DEFAULT: 1200 |
| metricStyle | isis:MetricStyle (scalar:Enum8) |
Holds ISIS Domain Metric Style | SELECTION: 1 - narrow 2 - wide 3 - transition DEFAULT: wide |
| mtu | isis:Mtu (scalar:Uint32) |
The configuration of link-state packet (LSP) maximum transmission units (MTU) is supported. You can enable up to 4352 bytes | RANGE: [256 , 4352] DEFAULT: 1492 |
| name | l3:VrfName (string:Basic) |
The IS-IS domain name. This name can be up to 64 characters. Note that you cannot change this name after the object has been saved. | A sequence of characters |
| net | isis:Net (string:Basic) |
Holds ISIS Domain Net value | A sequence of characters |
| passiveDflt | isis:PassiveT (scalar:Enum8) |
Holds ISIS Domain passive-interface default level | SELECTION: 0 - l1 1 - l2 2 - l12 3 - unknown DEFAULT: unknown |
| queueLimit | isis:QueueLimitType (scalar:Uint32) |
Holds the ISIS queue limit retransmit value | RANGE: [200 , 65535] DEFAULT: 2000 |
Operational Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| operSt | isis:OperSt (scalar:Enum8) |
The IS-IS domain operational state. This indicates if the current operational state of the IS-IS domain is up, down, or initializing. | SELECTION: 0 - unknown 1 - initializing 2 - ok 3 - failed |
Internal Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
| status | mo:ModificationStatus (scalar:Bitmask32) |
The upgrade status. This property is for internal use only. | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |