ospf:Area
The OSPF information that operates at an interface level.
Telemetry Sensor Path(s)
Configurable Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | PERMITTED VALUES |
|---|---|---|---|
| authType | ospf:AuthT (scalar:Enum8) |
Authentication type can be simple, none or md5 | SELECTION: 0 - none 1 - simple 2 - md5 3 - unspecified DEFAULT: unspecified |
| cost | ospf:AreaCost (scalar:Uint32) |
Area cost, specifies cost for default summary LSAs, Used with nssa/stub area types | RANGE: [0 , 16777215] DEFAULT: 1 |
| ctrl | ospf:AreaControl (scalar:Bitmask8) |
Area controls can be ABRs originate summary LSAs into other areas, redistributed LSAs or suppress forwarding address | SELECTION: 0 - unspecified 1 - summary 2 - redistribute 4 - suppress-fa DEFAULT: unspecified |
| id | ospf:AreaId (address:IPv4) |
Area identifier to which a network or interface belongs | RANGE: [0 , 4294967295] DEFAULT: 1 |
| nssaTransRole | ospf:NssaTransRole (scalar:Enum8) |
Not-so-stubby area(NSSA) translator role | SELECTION: 1 - always 2 - candidate 3 - never DEFAULT: candidate |
| sgmntRtgMpls | ospf:SegRtControl (scalar:Enum8) |
Segment routing mpls control | SELECTION: 0 - unspecified 1 - mpls 2 - disable DEFAULT: unspecified |
| type | ospf:AreaT (scalar:Enum8) |
Area types can be stub, nssa, backbone etc. | SELECTION: 1 - regular 2 - stub 3 - nssa DEFAULT: regular |
Operational Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| asbrCnt | ospf:AsbrCnt (scalar:Uint32) |
Autonomous system border router count | RANGE: [0, 4294967295] |
| brCnt | ospf:BrCnt (scalar:Uint32) |
Area border router count | RANGE: [0, 4294967295] |
| lsaCksumSum | ospf:LsaCksumSum (scalar:Uint32) |
Link-state advertisement(LSA) checksum sum | RANGE: [0, 4294967295] |
| nssaTransSt | ospf:NssaTransSt (scalar:Enum8) |
Not-so-stubby area (NSSA) translator state | SELECTION: 1 - enabled 2 - elected 3 - disabled DEFAULT: elected |
| nssaTransStabIntvl | ospf:NssaTransStabIntvl (scalar:Uint32) |
Not-so-stubby area (NSSA) translator stability interval | RANGE: [0 , 4294967295] DEFAULT: 40 |
| operStSgmntRtgMpls | ospf:SgmntRtgMplsOperSt (scalar:Enum8) |
Segment routing MPLS operational state in OSPF area which is Enable/Disable | SELECTION: 0 - Disabled 1 - Enabled DEFAULT: Disabled |
Internal Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
| name | naming:Name256 (string:Basic) |
The name of the object. | MAX SIZE: 63 |
| status | mo:ModificationStatus (scalar:Bitmask32) |
The upgrade status. This property is for internal use only. | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |