vrrp:Id

VRRPv2 Router Id

Telemetry Sensor Path(s)

Configurable Properties
PROPERTY NAME DATA TYPE DESCRIPTION PERMITTED VALUES
adminSt vrrp:AdminSt
(scalar:Enum8)
Admin state SELECTION:
1 - disabled
2 - enabled
DEFAULT: disabled
advIntvl vrrp:AdvIntvl
(scalar:UByte)
Advertisement Interval
RANGE: [1 , 255]
DEFAULT: 1
authText vrrp:AuthTextType
(string:Password)
Authentication Text
MAX SIZE: 8
DEFAULT:
authType vrrp:AuthType
(scalar:Enum8)
Authentication Type SELECTION:
1 - none
2 - simple
DEFAULT: none
bfdPeerAddr address:Ip
BFD Peer address Value must match ipv4 or ipv6 known format
fwdLwrThrld vrrp:PriVal
(scalar:UByte)
Fowarding Lower Threshold
RANGE: [1 , 254]
DEFAULT: 1
id vrrp:Id
(scalar:UByte)
VRRP Id
RANGE: [1 , 255]
preempt vrrp:Preempt
(scalar:Enum8)
Preempt SELECTION:
1 - enabled
2 - disabled
DEFAULT: enabled
priCfg vrrp:PriVal
(scalar:UByte)
Configured Priority
RANGE: [1 , 254]
DEFAULT: 100
primary address:Ip
primary IP address Value must match ipv4 or ipv6 known format

Operational Properties
PROPERTY NAME DATA TYPE DESCRIPTION POSSIBLE VALUES
bfdSessionSt vrrp:bfdSessionSt
(scalar:Enum8)
vrrp bfd session status SELECTION:
0 - disabled
1 - inactive
2 - deleted
3 - unknown
4 - active
DEFAULT: disabled
groupSt vrrp:GroupSt
(scalar:Enum8)
vrrp group state SELECTION:
0 - init
1 - backup
2 - master
groupStQual vrrp:GroupStQual
(scalar:Enum8)
vrrp group state qualifier SELECTION:
0 - up
1 - down
2 - no-primary-vip
3 - admin-down
4 - interface-down
5 - no-intf-ip-cfgd
6 - no-vrf-info-for-intf
7 - bd-not-allocated
8 - vmac-not-added
9 - invalid-vip
10 - IfIp-vip-subnet-mismatch
11 - internal error
mac address:MAC
vrrp vmac Value must match MM:MM:MM:SS:SS:SS format
masterAddr address:Ip
vrrp master address Value must match ipv4 or ipv6 known format

Internal Properties
PROPERTY NAME DATA TYPE DESCRIPTION POSSIBLE VALUES
fwdUprThrld vrrp:UprThrshld
(scalar:UByte)
Forwarding Upper Threshold
RANGE: [0 , 254]
DEFAULT: 0
modTs mo:TStamp
(scalar:Date)
The time when this object was last modified. SELECTION:
0 - never
DEFAULT: never
status mo:ModificationStatus
(scalar:Bitmask32)
The upgrade status. This property is for internal use only. SELECTION:
2 - created
4 - modified
8 - deleted
16 - replaced