eqpt:LC
A line card (IO card), which contains IO ports and stores various line card related state mac addresses assigned to this card, such as whether the card went online.
Telemetry Sensor Path(s)
Configurable Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | PERMITTED VALUES |
|---|---|---|---|
| descr | eqpt:Descr |
Description of the specified attribute |
Operational Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| breakoutFactor | scalar:Uint32 |
The line card breakout factor | RANGE: [0, 4294967295] DEFAULT: 1 |
| hwVer | cap:Version (string:Basic) |
The hardware version of a card. | A sequence of characters |
| macB | eqpt:MacAddr (string:Basic) |
Value is same as 'MAC-Address(es)' shown in The MAC address base.show module |
A sequence of characters |
| macE | eqpt:MacAddr (string:Basic) |
Value is same as 'MAC-Address(es)' shown in The card MAC address endshow module |
A sequence of characters |
| numP | eqpt:CardNumPorts (scalar:Uint16) |
Value is same as 'Ports' shown in The number of ports on the card.show module |
RANGE: [0 , 256] DEFAULT: 0 |
| operSt | eqpt:COpSt (scalar:Enum8) |
Value is same as 'Status' shown in The operational status.show module |
SELECTION: 0 - unknown 1 - inserted 2 - absent 3 - mismatch 4 - fail 5 - present 6 - removed 7 - online 8 - offline 9 - pwr-up 10 - pwr-down 11 - err-pwr-down 12 - testing 13 - init 14 - reg-failure 15 - dnld 16 - upg 17 - srg-fail 18 - ha-seq-fail DEFAULT: unknown |
| partNumber | eqpt:PartNum (string:Basic) |
Value is same as 'Part Number' shown in The card part numbershow sprom module |
A sequence of characters |
| powerActualDraw | eqpt:Watts (scalar:Uint32) |
It is the power value that module actually draw | RANGE: [0, 4294967295] |
| powerAllocated | eqpt:Watts (scalar:Uint32) |
It is the power value that power supply allocated to the module | RANGE: [0, 4294967295] |
| swCId | eqpt:CardId (scalar:Uint32) |
The software card ID | RANGE: [0, 4294967295] |
| swVer | eqpt:Revision (string:Basic) |
Value is same as 'Sw' shown in The card software revisionshow module |
A sequence of characters DEFAULT: 0 |
| type | eqpt:CardT (scalar:Enum16) |
The type of card. | SELECTION: 0 - unknown 1 - supervisor 2 - linecard 3 - fabriccard 4 - sysctrlcard 5 - extchcard 6 - fan-tray 7 - power-supply 8 - lemcard DEFAULT: linecard |
| vdrId | eqpt:ModVid (string:Basic) |
Value is same as 'VID' shown in The card vdrIdshow sprom module |
A sequence of characters |
Internal Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| id | eqpt:Id (scalar:Uint32) |
The item identifier. | RANGE: [0, 4294967295] |
| mfgTm | scalar:Date |
Manufacturing Time | DATE FORMAT: %Y-%m-%dT%H:%M:%S.%f%z DEFAULT: not-applicable |
| modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
| model | eqpt:Model (string:Basic) |
Model | A sequence of characters |
| pwrSt | eqpt:PwrState (scalar:Enum8) |
The power state of this card | Value is same as 'Status' shown in SELECTION: show environment power0 - unknown 1 - off 2 - on 3 - deny 4 - multi-boot-fail DEFAULT: unknown |
| rev | eqpt:Revision (string:Basic) |
Revision | A sequence of characters DEFAULT: 0 |
| ser | eqpt:Serial (naming:Name) |
Serial Number | MAX SIZE: 16 |
| status | mo:ModificationStatus (scalar:Bitmask32) |
The upgrade status. This property is for internal use only. | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |
| upTs | scalar:Date |
The timestamp when card was detected | Value is same as 'Up Time' shown in DATE FORMAT: %Y-%m-%dT%H:%M:%S.%f%zshow module uptime |
| vendor | eqpt:Vendor (string:Basic) |
Vendor | A sequence of characters DEFAULT: Cisco Systems, Inc |