hsrp:If
Interface with HSRP Enabled
Telemetry Sensor Path(s)
Configurable Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | PERMITTED VALUES |
|---|---|---|---|
| adminSt | nw:IfAdminSt (nw:AdminSt) |
The administrative state of the object or policy. | SELECTION: 1 - enabled 2 - disabled |
| bfd | hsrp:State (scalar:Enum8) |
Enables/disables BFD on an HSRP interface | SELECTION: 0 - disabled 1 - enabled DEFAULT: disabled |
| biaScope | hsrp:BiaScopeType (scalar:Enum8) |
Use-Bia Scope | SELECTION: 1 - global 2 - local DEFAULT: global |
| ctrl | hsrp:IfControl (scalar:Bitmask8) |
Controls | SELECTION: 1 - bia |
| delayIntfMin | scalar:Uint16 |
Delay in seconds, to start HSRP state machine after receiving interface moving to Up state | RANGE: [0 , 10000] DEFAULT: 0 |
| descr | naming:Descr1024 (string:Basic) |
Description | MAX SIZE: 1024 |
| macRefreshIntvl | scalar:Uint16 |
The MAC refresh interval in seconds, for the HSRP slave group on the interface | RANGE: [0 , 10000] DEFAULT: 60 |
| macRefreshIntvlCfg | hsrp:State (scalar:Enum8) |
Enables/Disables hsrp MAC refresh interval | SELECTION: 0 - disabled 1 - enabled DEFAULT: disabled |
| name | naming:Name256 (string:Basic) |
The name of the object. | MAX SIZE: 63 |
| reloadDelay | scalar:Uint16 |
Delay in seconds, to start HSRP state machine after the system-reload | RANGE: [0 , 10000] DEFAULT: 0 |
| version | hsrp:HsrpVersion (scalar:Enum8) |
Hsrp version | SELECTION: 1 - v1 2 - v2 DEFAULT: v1 |
Internal Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| id | nw:IfId (base:IfIndex) |
An identifier . | Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100 |
| modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
| status | mo:ModificationStatus (scalar:Bitmask32) |
The upgrade status. This property is for internal use only. | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |