l1:PhysIf
The object that represents the Layer 1 physical Ethernet interface information object.
Telemetry Sensor Path(s)
Configurable Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | PERMITTED VALUES |
|---|---|---|---|
| FECMode | l1:FECMode (scalar:Enum8) |
FEC Mode | SELECTION: 1 - fc-fec 2 - rs-fec 3 - fec-off 4 - auto 5 - rs-ieee 6 - rs-cons16 7 - kp-fec DEFAULT: auto |
| accessVlan | l1:l1IfAccessVlan (base:Encap) |
Configured Access Vlan | SELECTION: unknown, vlan-%d or vxlan-%d DEFAULT: vlan-1 |
| adminSt | l1:AdminSt (scalar:Enum8) |
Administrative port state | SELECTION: 1 - down 2 - up DEFAULT: up |
| autoNeg | l1:AutoNeg (scalar:Enum8) |
Administrative port auto-negotiation | SELECTION: 1 - on 2 - off 3 - 25G DEFAULT: on |
| beacon | l1:Beacon (scalar:Enum8) |
Beacon State | SELECTION: 1 - on 2 - off DEFAULT: off |
| bw | l1:Bw (scalar:Uint32) |
The bandwidth parameter for a routed interface, port channel, or subinterface. | RANGE: [0 , 3200000000] DEFAULT: 0 |
| controllerId | aggregate:ControllerIdBitmap (base:BitArray) |
Controller ID | ARRAY SIZE: 256 |
| delay | l1:Delay (scalar:Uint32) |
The administrative port delay time. | RANGE: [1 , 16777215] DEFAULT: 1 |
| descr | naming:Descr1024 (string:Basic) |
descr | MAX SIZE: 254 |
| dfeAdaptiveTuning | l1:DfeAdaptiveTuning (scalar:Enum8) |
DFE (Decision Feedback Equalizer) Adaptive Tuning | SELECTION: 0 - disable 1 - enable DEFAULT: enable |
| dfeTuningDelay | l1:DfeTuningDelay (scalar:Uint16) |
DFE (Decision Feedback Equalizer) Tuning Delay | RANGE: [100 , 10000] DEFAULT: 100 |
| dot1qEtherType | l1:DDot1qEtherType (scalar:Uint32) |
The administrative port Dot1q ether-type. Dot1q Ether Type configures the TPID value in the VLAN tag field for packets received and sent by the interface. | RANGE: [1536 , 65535] DEFAULT: 0x8100 |
| duplex | l1:Duplex (scalar:Enum8) |
Duplex | SELECTION: 1 - auto 2 - full 3 - half DEFAULT: auto |
| inhBw | l1:InheritBw (scalar:Uint32) |
Administrative port inherit bandwidth | RANGE: [0 , 4294967295] DEFAULT: 4294967295 |
| ituChannel | l1:ItuChannel (scalar:Uint32) |
ITU Channel to support DWDM XCVR | RANGE: [1 , 96] DEFAULT: 32 |
| layer | l1:Layer (scalar:Enum8) |
Administrative port layer | SELECTION: 1 - Layer2 2 - Layer3 DEFAULT: Layer2 |
| linkDebounce | l1:LinkDebounce (scalar:Uint16) |
Administrative port link debounce interval | RANGE: [0 , 20000] DEFAULT: 100 |
| linkDebounceLinkUp | l1:LinkDebounceLinkUp (scalar:Uint16) |
Link Debounce Interval - LinkUp Event | RANGE: [0 , 10000] DEFAULT: 0 |
| linkLog | l1:LinkLog (scalar:Enum8) |
Administrative link logging enable | SELECTION: 1 - default 2 - enable 3 - disable DEFAULT: default |
| linkLoopback | l1:LinkLoopback (scalar:Enum8) |
Link loopback configuration | SELECTION: 0 - disable 1 - enable DEFAULT: disable |
| linkMacUpTimer | l1:LinkMacUpTimer (scalar:Uint16) |
Administrative port link mac-up timer | RANGE: [0 , 120] DEFAULT: 0 |
| linkTransmitReset | l1:LinkTransmitReset (scalar:Enum8) |
Link Transmit Reset | SELECTION: 0 - disable 1 - enable DEFAULT: enable |
| mdix | l1:Mdix (scalar:Enum8) |
The administrative Mdix mode. The Medium-dependant interface crossover (Mdix) is when the interface automatically detects the required cable connection type (straight through or crossover) and configures the connection appropriately. | SELECTION: 1 - auto 2 - mdi 3 - mdi-x DEFAULT: auto |
| mediaType | l1:MediaType (scalar:Enum8) |
phy interfaces media type | SELECTION: 0 - none 1 - 10g-tx DEFAULT: none |
| medium | l1:Medium (scalar:Enum8) |
The administrative port medium type. | SELECTION: 1 - broadcast 2 - p2p DEFAULT: broadcast |
| mode | l1:Mode (scalar:Enum8) |
Administrative port mode | SELECTION: 1 - access 2 - trunk 3 - fex-fabric 4 - dot1q-tunnel 5 - promiscuous 6 - host 7 - trunk_secondary 8 - trunk_promiscuous 9 - vntag DEFAULT: access |
| mtu | l1:Mtu (scalar:Uint32) |
Administrative port mtu | RANGE: [576 , 9216] DEFAULT: 1500 |
| name | naming:Name256 (string:Basic) |
The name of the object. | MAX SIZE: 63 |
| nativeVlan | l1:l1IfNativeVlan (base:Encap) |
Configured Native Vlan | SELECTION: unknown, vlan-%d or vxlan-%d DEFAULT: vlan-1 |
| packetTimestampEgressSourceId | l1:PacketTimestampSourceId (scalar:Uint32) |
Egress timestamp Source Id | RANGE: [0 , 8388606] DEFAULT: 0 |
| packetTimestampIngressSourceId | l1:PacketTimestampSourceId (scalar:Uint32) |
Ingress timestamp Source Id | RANGE: [0 , 8388606] DEFAULT: 0 |
| packetTimestampState | l1:PacketTimestampState (scalar:Enum8) |
packet timestamp feature state | SELECTION: 0 - disable 1 - enable-ingress 2 - enable-egress 3 - enable-both DEFAULT: disable |
| portT | eqpt:PortT (scalar:Enum16) |
Type of the port: Fabric vs Leaf | SELECTION: 0 - unknown 1 - eobc 2 - mgmt 3 - fab 4 - leaf 5 - extchhp 6 - extchfp DEFAULT: unknown |
| routerMac | address:MAC |
The administrative router MAC address. | Value must match MM:MM:MM:SS:SS:SS format DEFAULT: not-applicable |
| snmpTrapSt | l1:SnmpTrapSt (scalar:Enum8) |
Administrative port snmp trap state | SELECTION: 1 - enable 2 - disable DEFAULT: enable |
| spanMode | l1:SpanMode (scalar:Enum8) |
Administrative port span mode | SELECTION: 1 - not-a-span-dest 2 - span-dest 3 - span-dest-fwd 4 - span-dest-fwd-learn DEFAULT: not-a-span-dest |
| speed | l1:Speed (scalar:Enum8) |
Administrative port speed | SELECTION: 0 - unknown 2 - 100M 3 - 1G 4 - 10G 5 - 40G 6 - auto 7 - auto 100M 8 - auto 100M 1G 9 - 100G 10 - 25G 11 - 10M 12 - 50G 13 - 200G 14 - 400G 15 - 2.5G 16 - 5G 17 - auto 2.5G 5G 10G 18 - auto 100M 1G 2.5G 5G DEFAULT: auto |
| speedGroup | l1:SpeedGroup (scalar:Enum8) |
Speed Group | SELECTION: 0 - unknown 3 - 1000 4 - 10000 5 - 40000 6 - auto 10 - 25000 DEFAULT: auto |
| trunkLog | l1:TrunkLog (scalar:Enum8) |
Administrative trunk logging enable | SELECTION: 1 - default 2 - enable 3 - disable DEFAULT: default |
| trunkVlans | l1:l1IfTrunkVlans (l2:VlanBitmap) |
Configed Trunk Vlans | DEFAULT: 1-4094 |
| uniDirectionalEthernet | l1:UniDirectionalEthernet (scalar:Enum8) |
UDE (Uni-Directional Ethernet) | SELECTION: 0 - disable 1 - send-only 2 - receive-only DEFAULT: disable |
| usage | l1:PortUsage (scalar:Bitmask8) |
The port usage type. | SELECTION: 1 - discovery 2 - epg 4 - fabric 8 - infra 16 - controller 32 - blacklist DEFAULT: discovery |
| userCfgdFlags | l1:userCfgdFlags (scalar:Bitmask8) |
Port User Config Flags | SELECTION: 0 - none 1 - admin_state 2 - admin_layer 4 - admin_router_mac 8 - admin_dce_mode 16 - admin_mtu DEFAULT: none |
| voicePortCos | l1:VoicePortCos (scalar:SByte) |
Voice Port Cos | RANGE: [-1 , 7] DEFAULT: none |
| voicePortTrust | l1:VoicePortTrust (scalar:SByte) |
Voice Port Trust | SELECTION: -1 - disable 8 - enable DEFAULT: disable |
| voiceVlanId | l1:VoiceVlanId (scalar:Uint16) |
Voice VLAN ID | RANGE: [0 , 4092] DEFAULT: none |
| voiceVlanType | l1:VoiceVlanType (scalar:Enum8) |
Voice vlan type | SELECTION: 0 - none 1 - tagged 2 - dot1p 3 - untagged DEFAULT: none |
Internal Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| id | nw:IfId (base:IfIndex) |
An identifier . | Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100 |
| modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
| status | mo:ModificationStatus (scalar:Bitmask32) |
The upgrade status. This property is for internal use only. | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |
| switchingSt | l1:SwitchingSt (scalar:Enum8) |
Switching state | SELECTION: 0 - disabled 1 - enabled DEFAULT: disabled |