l1:VethIf

Virtual Ethernet Interface Config

Telemetry Sensor Path(s)
Configurable Properties
PROPERTY NAME DATA TYPE DESCRIPTION PERMITTED VALUES
accessVlan l1:l1IfAccessVlan
(base:Encap)		 Configured Access Vlan SELECTION: unknown, vlan-%d or vxlan-%d
DEFAULT: vlan-1
adminSt l1:AdminSt
(scalar:Enum8)		 Administrative port state SELECTION:
1 - down
2 - up
DEFAULT: up
autoNeg l1:AutoNeg
(scalar:Enum8)		 Administrative port auto-negotiation SELECTION:
1 - on
2 - off
3 - 25G
DEFAULT: on
boundChannelId l1:BoundChannelId
(scalar:Uint32)		 Channel Id used for this Veth
RANGE: [100 , 65535]
DEFAULT: 100
boundIf nw:IfId
(base:IfIndex)		 Bound Port Index Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100
bw l1:Bw
(scalar:Uint32)		 The bandwidth parameter for a routed interface, port channel, or subinterface.
RANGE: [0 , 3200000000]
DEFAULT: 0
controllerId aggregate:ControllerIdBitmap
(base:BitArray)		 Controller ID
ARRAY SIZE: 256
ctrl l1:VethCfgCtrl
(scalar:Bitmask16)		 Feature Enable flags
delay l1:Delay
(scalar:Uint32)		 The administrative port delay time.
RANGE: [1 , 16777215]
DEFAULT: 1
descr naming:Descr1024
(string:Basic)		 descr
MAX SIZE: 254
dot1qEtherType l1:DDot1qEtherType
(scalar:Uint32)		 The administrative port Dot1q ether-type. Dot1q Ether Type configures the TPID value in the VLAN tag field for packets received and sent by the interface.
RANGE: [1536 , 65535]
DEFAULT: 0x8100
duplex l1:Duplex
(scalar:Enum8)		 Duplex SELECTION:
1 - auto
2 - full
3 - half
DEFAULT: auto
inhBw l1:InheritBw
(scalar:Uint32)		 Administrative port inherit bandwidth
RANGE: [0 , 4294967295]
DEFAULT: 4294967295
ituChannel l1:ItuChannel
(scalar:Uint32)		 ITU Channel to support DWDM XCVR
RANGE: [1 , 96]
DEFAULT: 32
label string:Basic
 HostNicGrp Label A sequence of characters
layer l1:Layer
(scalar:Enum8)		 Administrative port layer SELECTION:
1 - Layer2
2 - Layer3
DEFAULT: Layer2
linkDebounce l1:LinkDebounce
(scalar:Uint16)		 Administrative port link debounce interval
RANGE: [0 , 20000]
DEFAULT: 100
linkLog l1:LinkLog
(scalar:Enum8)		 Administrative link logging enable SELECTION:
1 - default
2 - enable
3 - disable
DEFAULT: default
mdix l1:Mdix
(scalar:Enum8)		 The administrative Mdix mode. The Medium-dependant interface crossover (Mdix) is when the interface automatically detects the required cable connection type (straight through or crossover) and configures the connection appropriately. SELECTION:
1 - auto
2 - mdi
3 - mdi-x
DEFAULT: auto
medium l1:Medium
(scalar:Enum8)		 The administrative port medium type. SELECTION:
1 - broadcast
2 - p2p
DEFAULT: broadcast
mgmtId l1:VethMgmtId
(scalar:Uint32)		 Veth number configured by UCSM RANGE: [0, 4294967295]
mode l1:Mode
(scalar:Enum8)		 Administrative port mode SELECTION:
1 - access
2 - trunk
3 - fex-fabric
4 - dot1q-tunnel
5 - promiscuous
6 - host
7 - trunk_secondary
8 - trunk_promiscuous
9 - vntag
DEFAULT: access
mtu l1:Mtu
(scalar:Uint32)		 Administrative port mtu
RANGE: [576 , 9216]
DEFAULT: 1500
name naming:Name256
(string:Basic)		 The name of the object.
MAX SIZE: 63
nativeVlan l1:l1IfNativeVlan
(base:Encap)		 Configured Native Vlan SELECTION: unknown, vlan-%d or vxlan-%d
DEFAULT: vlan-1
portT eqpt:PortT
(scalar:Enum16)		 Type of the port: Fabric vs Leaf SELECTION:
0 - unknown
1 - eobc
2 - mgmt
3 - fab
4 - leaf
5 - extchhp
6 - extchfp
DEFAULT: unknown
regmacAllHost scalar:Bool
 Veth regmac install to all-host. SELECTION: true or false
routerMac address:MAC
 The administrative router MAC address. Value must match MM:MM:MM:SS:SS:SS format
DEFAULT: not-applicable
snmpTrapSt l1:SnmpTrapSt
(scalar:Enum8)		 Administrative port snmp trap state SELECTION:
1 - enable
2 - disable
DEFAULT: enable
spanMode l1:SpanMode
(scalar:Enum8)		 Administrative port span mode SELECTION:
1 - not-a-span-dest
2 - span-dest
3 - span-dest-fwd
4 - span-dest-fwd-learn
DEFAULT: not-a-span-dest
speed l1:Speed
(scalar:Enum8)		 Administrative port speed SELECTION:
0 - unknown
2 - 100M
3 - 1G
4 - 10G
5 - 40G
6 - auto
7 - auto 100M
8 - auto 100M 1G
9 - 100G
10 - 25G
11 - 10M
12 - 50G
13 - 200G
14 - 400G
15 - 2.5G
16 - 5G
17 - auto 2.5G 5G 10G
18 - auto 100M 1G 2.5G 5G
DEFAULT: auto
trunkLog l1:TrunkLog
(scalar:Enum8)		 Administrative trunk logging enable SELECTION:
1 - default
2 - enable
3 - disable
DEFAULT: default
trunkVlans l1:l1IfTrunkVlans
(l2:VlanBitmap)		 Configed Trunk Vlans
DEFAULT: 1-4094
usage l1:PortUsage
(scalar:Bitmask8)		 The port usage type. SELECTION:
1 - discovery
2 - epg
4 - fabric
8 - infra
16 - controller
32 - blacklist
DEFAULT: discovery
userCfgdFlags l1:userCfgdFlags
(scalar:Bitmask8)		 Port User Config Flags SELECTION:
0 - none
1 - admin_state
2 - admin_layer
4 - admin_router_mac
8 - admin_dce_mode
16 - admin_mtu
DEFAULT: none
Operational Properties
PROPERTY NAME DATA TYPE DESCRIPTION POSSIBLE VALUES
capability l1:VethCapFlags
(scalar:Bitmask16)		 Capability flags
operSt l1:VethState
(scalar:Enum8)		 Vethernet State SELECTION:
0 - none
1 - created
2 - attached
3 - detached
4 - removed
DEFAULT: none
operStQual l1:OperStQual
(scalar:Enum8)		 Port State Down Reason SELECTION:
0 - unknown
1 - up
2 - admin-down
3 - link-down
4 - fail
5 - no-license
6 - link-up
7 - hw-fail
8 - sw-fail
9 - err-disabled
10 - sfp-missing
11 - loopback-diag-failure
12 - udld-unidir-detected
13 - udld-tx-rx-loop
14 - udld-neighbor-mismatch
15 - udld-empty-echo
16 - udld-aggressive-mode-link-failed
17 - link-flap-err
18 - err-disabled-ip-conflict
19 - ipqos-dcbxp-compat-failure
20 - link-failure
21 - offline
22 - initializing
23 - inactive
24 - channel-admin-down
25 - channel-err-disabled
26 - suspended
27 - proto-port-suspend
28 - channel-membership-update-in-progress
29 - parent-down
30 - parent-admin-down
31 - interface-removed
32 - fcot-no-present
33 - fcot-vendor-not-supported
34 - incompatible-admin-mode
35 - incompatible-admin-speed
36 - suspended-by-mode
37 - suspended-by-speed
38 - domain-max-retransmission-failure
39 - loopback-isolation
40 - upgrade-in-progress
41 - port-channel-members-down
42 - ethernet-link-down
43 - ethernet-interface-down
44 - admin-config-change
45 - module-removed
46 - vrf-unusable
47 - none
48 - xcvr-initializing
49 - cap-absent
50 - sfp-eth-compliant-err
51 - sdp-timeout
52 - sat-incompat-topo
53 - sat-not-configured
54 - auth-fail
55 - auth-pending
56 - suspended-due-to-minlinks
57 - suspended-due-to-no-lacp-pdus
58 - sat-fabric-if-down
59 - invalid-sat-fabric-if
60 - fex-sfp-invalid
61 - suspend-by-mtu
62 - suspend-by-vpc
63 - router-mac-failure
64 - xcvr-auth-failed
65 - non-sticky-externally-disabled
66 - sfp-speed-mismatch
67 - fcot-chksum-err
68 - xcvr-invalid
69 - vpc-peer-link-down
70 - vpc-cfg-in-progress
71 - vpc-no-response-from-peer
72 - bpdu-guard-err-disable
73 - hot-standby-in-bundle
74 - handshake-fail-errdisable
75 - non-participating
76 - rcf-in-progress
77 - elp-failure-isolation
78 - esc-failure-isolation
79 - domain-overlap-isolation
80 - domain-addr-assign-failure-isolation
81 - domain-other-side-eport-isolated
82 - domain-invalid-rcf-received
83 - domain-manager-disabled
84 - zone-merge-failure-isolation
85 - vsan-mismatch-isolation
86 - src-port-not-bound
87 - suspended-by-wwn
88 - epp-failure
89 - port-vsan-mismatch-isolation
90 - incompatible-admin-rxbbcredit
91 - incompatible-admin-rxbufsize
92 - zone-remote-no-resp-isolation
93 - osm-e-port-up
94 - osm-non-e-port-up
95 - peer-fcip-closed-tcp-connection
96 - peer-fcip-reset-tcp-connection
97 - tcp-max-retransmissions
98 - tcp-keep-alive-timer-expired
99 - tcp-persist-timer-expired
100 - tunnel-src-port-removed
101 - tunnel-src-module-not-online
102 - invalid-config
103 - port-bind-failure
104 - fabric-bind-failure
105 - no-trunk-oper-vsans-isolation
106 - ficon-vsan-down
107 - invalid-attachment
108 - port-blocked
109 - incompatible-admin-rxbbcredit-performance-buf
110 - too-many-invalid-flogis
111 - denied-due-to-port-binding
112 - elp-failure-revision-mismatch
113 - elp-failure-classf-param-err
114 - elp-failure-classn-param-err
115 - elp-failure-unknown-flow-ctl-code
116 - elp-failure-invalid-flow-ctl-param
117 - elp-failure-invalid-port-name
118 - elp-failure-invalid-switch-name
119 - elp-failure-ratov-edtov-mismatch
120 - elp-failure-loopback-detected
121 - elp-failure-invalid-tx-bbcredit
122 - elp-failure-invalid-payload-size
123 - bundle-miscfg
124 - bit-err-rt-thres-exceeded
125 - link-fail-link-reset
126 - link-fail-port-init-failed
127 - link-fail-port-unusable
128 - link-fail-loss-of-signal
129 - link-fail-loss-of-sync
130 - link-fail-nos-rcvd
131 - link-fail-ols-rcvd
132 - link-fail-debounce-timeout
133 - link-fail-lr-rcvd-b2b
134 - link-fail-credit-loss
135 - link-fail-rx-que-overflow
136 - link-fail-too-many-intr
137 - link-fail-lip-rcvd-b2b
138 - link-fail-credit-loss-b2b
139 - link-fail-opny-tmo-b2b
140 - link-fail-opny-ret-b2b
141 - link-fail-lip-f8-rcvd
142 - link-fail-line-card-port-shutdown
143 - fcsp-authent-failure
144 - ohms-external-lb-test
145 - invalid-fabric-binding-exchange
146 - tov-mismatch
147 - ficon-not-enabled
148 - ficon-no-portnumber
149 - ficon-being-enabled
150 - eport-prohibited
151 - trunk-not-fully-active
152 - fabric-binding-swwn-not-found
153 - fabric-binding-domain-invalid
154 - fabric-binding-database-mismatch
155 - fabric-binding-peer-not-responding
156 - tracked-port-down
157 - ec-suspended-for-loop
158 - isolate-bundle-miscfg
159 - peer-not-support-bundles
160 - port-bringup-isolation
161 - domain-not-allowed-isolation
162 - virtual-ivr-domain-overlap-isolation
163 - out-of-service
164 - bundle-stdby
165 - port-cap-fc-port-connector-type-err
166 - error-disabled-reinit-limit-reached
167 - ficon-vsan-duplicate-portnum
168 - internal-rcf-in-progress
169 - two-switches-with-same-wwn
170 - invalid-other-princ-efp-req-recd
171 - domain-isolation-unknown-reason
172 - elp-failure-all-zero-peer-wwn-rcvd
173 - prefered-path-isolation
174 - fc-redirect-isolation
175 - port-act-license-not-available
176 - sdm-isolation
177 - fcid-allocation-failed
178 - externally-disabled
179 - fcot-read-error
180 - port-guard-down-on-link-failure
181 - incomplete-config
182 - incomplete-tunnel-config
183 - hw-programming-failed
184 - tunnel-dest-not-reachable
185 - sfp-invalid
186 - tunnel-vrf-mismatch
187 - tunnel-vrf-fw-ref
188 - duplicate-tunnel-cfg
189 - primary-vlan-down
190 - dot1x-security-errdisable
191 - vf-tagging-capability-err
192 - port-disabled
193 - tunnel-mode-not-configured
194 - tunnel-source-not-configured
195 - tunnel-destination-not-configured
196 - tunnel-unable2resolve-source-ipaddress
197 - tunnel-unable2resolve-destination-ipaddress
198 - tunnel-vrf-is-down
199 - sif-admin-down
200 - phy-intf-down
201 - intf-sif-limit-exceeded
202 - insufficient-power
203 - no-fcoe
204 - dcx-compat-mismatch
205 - isolate-bundle-limit-exceeded
206 - sif-not-bound
207 - err-disable-lacp-miscfg
208 - errdisabled-pkt-err
209 - vlan-vsan-mapping-not-enabled
210 - stp-not-forwarding-in-fcoe-mapped-vlan
211 - module-offline
212 - stp-inconsist-vpc-peerlink-errdisable
213 - set-port-state-failed-errdisable
214 - tunnel-source-down
215 - cdp-info-not-avail
216 - fcot-clk-rate-mismatch
217 - port-guard-down-on-trustsec-violation
218 - wait-for-flogi
219 - npiv-not-enabled-in-upstream
220 - vsan-mismatch-with-upstream-switch-port
221 - port-guard-bit-error-rate
222 - port-guard-signal-loss
223 - port-guard-sync-loss
224 - port-guard-link-reset
225 - port-guard-credit-loss
226 - ipqos-mgr-policy-app-failed
227 - pause-rate-limit-errdisable
228 - lstgrp-uplink-down
229 - sticky-down-on-link-failure
230 - dcx-multiple-msap-ids-errdisable
231 - dcx-100-pdus-rcvd-noack-errdisable
232 - enm-sat-incompat-uplink
233 - enm-loop-detected
234 - sub-group-id-not-assigned
235 - vem-unlicensed
236 - profile-not-found
237 - vlan-does-not-exist
238 - vlan-type
239 - vlan-down
240 - vpc-peer-upgrade
241 - non-cisco-hba-vftag
242 - domain-id-config-mismatch
243 - xcvr-absent
244 - vfc-binding-invalid
245 - vlan-not-fcoe-enabled
246 - pvlan-native-vlan-err
247 - eth-l2-vlan-down
248 - eth-intf-invalid-binding
249 - pmon-failure
250 - l3-not-ready
251 - speed-mismatch
252 - flowcontrol-mismatch
253 - vdc-mode
254 - enm-pin-fail-link-down
255 - inactive-m1-port-fpath-access-vlan
DEFAULT: 0
Internal Properties
PROPERTY NAME DATA TYPE DESCRIPTION POSSIBLE VALUES
id nw:IfId
(base:IfIndex)		 An identifier . Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100
modTs mo:TStamp
(scalar:Date)		 The time when this object was last modified. SELECTION:
0 - never
DEFAULT: never
status mo:ModificationStatus
(scalar:Bitmask32)		 The upgrade status. This property is for internal use only. SELECTION:
2 - created
4 - modified
8 - deleted
16 - replaced
switchingSt l1:SwitchingSt
(scalar:Enum8)		 Switching state SELECTION:
0 - disabled
1 - enabled
DEFAULT: disabled