satm:RemoteFcotX2
The FCOT definition of an X2 type transceiver on the fabric extender.
Telemetry Sensor Path(s)
Operational Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| apsStressEnv | scalar:UByte |
RANGE: [0, 255] | |
| bitEncoding | scalar:UByte |
RANGE: [0, 255] | |
| bitRateMbps | ethpm:X2BitRateBytes (base:Uint8Array) |
ARRAY SIZE: 2 |
|
| checksum | scalar:UByte |
Displays the firmware checksum. | RANGE: [0, 255] |
| ciscoPN | string:Basic |
The Cisco part number. | A sequence of characters |
| ciscoPid | string:Basic |
The Cisco product ID. | A sequence of characters |
| ciscoRev | string:Basic |
The Cisco revision number. | A sequence of characters |
| ciscoSN | string:Basic |
The Cisco serial number. | A sequence of characters |
| ciscoVid | string:Basic |
The Cisco vendor id. | A sequence of characters |
| connectType | scalar:UByte |
The code for a connector type | RANGE: [0, 255] |
| dateCode | string:Basic |
The vendor?s manufacturing date code. | A sequence of characters |
| description | string:Basic |
Fcot description | A sequence of characters |
| diagOptMonCap | scalar:UByte |
The diagnostics and monitoring capability. | RANGE: [0, 255] |
| eid | string:Basic |
Cisco EID | A sequence of characters |
| extVendorSpecific | ethpm:X2ExtendedVendorSpecificInfoBytes (base:Uint8Array) |
ARRAY SIZE: 89 |
|
| fCTxType | scalar:UByte |
The type of fibre channel transmitter. | RANGE: [0, 255] |
| fcotNum | scalar:UByte |
The FCOT number. The device number that this info belongs to. | RANGE: [0, 255] |
| fcotStatus | scalar:UByte |
Fcot status | RANGE: [0, 255] |
| fcotType | scalar:UByte |
The transceiver type. This property is a numerical value. | RANGE: [0, 255] |
| fibreType | ethpm:X2FibreTypeBytes (base:Uint8Array) |
ARRAY SIZE: 2 |
|
| fiveVStressEnv | scalar:UByte |
RANGE: [0, 255] | |
| flags | ethpm:FcotFlags (scalar:Enum8) |
Fcot flags | SELECTION: 0 - unknown 1 - access-failed 2 - checksum-failed 3 - vendor-crc-failed 4 - sfp-speed-mismatch 5 - eth-compalint-failed 6 - unknown-xcvr-type 7 - emphasis-checksum-failed 8 - init-failed 9 - ok-auth-success-no-md5 10 - auth-failed 11 - ok-delayed-auth-success 12 - delayed-auth-failed 13 - ok-no-md5 14 - ok DEFAULT: unknown |
| gigEthCC | scalar:UByte |
RANGE: [0, 255] | |
| isFcotPresent | scalar:Bool |
Fcot presence status | SELECTION: true or false |
| lotCode | ethpm:X2LotCodeBytes (base:Uint8Array) |
A vendor specific lot ASCII code. | ARRAY SIZE: 2 |
| lowPwrStartupCap | scalar:UByte |
RANGE: [0, 255] | |
| maxSpeed | scalar:Uint32 |
The nominal bitrate in MBits per sec. | RANGE: [0, 4294967295] |
| minSpeed | scalar:Uint32 |
The minimum speed of the interface. | RANGE: [0, 4294967295] |
| normalApsVolt | scalar:UByte |
RANGE: [0, 255] | |
| packageOui | ethpm:X2PackageOuiBytes (base:Uint8Array) |
ARRAY SIZE: 4 |
|
| partNumber | string:Basic |
Fcot part number | A sequence of characters |
| protocolType | scalar:UByte |
A protocol type. | RANGE: [0, 255] |
| range | ethpm:X2RangeBytes (base:Uint8Array) |
A range. | ARRAY SIZE: 2 |
| reserved | scalar:UByte |
A reserved byte. | RANGE: [0, 255] |
| sonetSdhCode | ethpm:X2SonetSdhCodeBytes (base:Uint8Array) |
ARRAY SIZE: 4 |
|
| state | ethpm:FcotState (scalar:Enum8) |
Fcot state | SELECTION: 0 - unknown 1 - inserted 2 - removed 3 - hw-failure 4 - inserted-initializing DEFAULT: unknown |
| threeThreeVStressEnv | scalar:UByte |
RANGE: [0, 255] | |
| transceiverType | ethpm:FcotTransceiverType (scalar:Enum8) |
Transceiver Type | SELECTION: 1 - copper 2 - fiber 3 - unknown DEFAULT: unknown |
| type | ethpm:FcotType (scalar:Enum8) |
Fcot type | SELECTION: 0 - unknown 1 - xfp 2 - x2 3 - dummy 4 - sfp 5 - qsfp 6 - cfp-40g 7 - cfp-100g 8 - cfp 9 - qsfp28 10 - qsfpdd 11 - cpak 12 - qsfp56 13 - cxp DEFAULT: unknown |
| typeName | string:Basic |
Type Name | A sequence of characters |
| vendorName | string:Basic |
The SFP transceiver vendor name (ASCII). | A sequence of characters |
| vendorOui | ethpm:X2VendorOuiBytes (base:Uint8Array) |
A vendor OUI. | ARRAY SIZE: 4 |
| vendorPn | string:Basic |
The vendor part number in byte array form. | A sequence of characters |
| vendorRev | string:Basic |
The vendor revision number. | A sequence of characters |
| vendorSerNo | string:Basic |
A vendor serial number. | A sequence of characters |
| versionId | string:Basic |
Fcot version id | A sequence of characters |
| waveLenCh0 | ethpm:X2WavelengthChannelBytes (base:Uint8Array) |
ARRAY SIZE: 3 |
|
| waveLenCh1 | ethpm:X2WavelengthChannelBytes (base:Uint8Array) |
ARRAY SIZE: 3 |
|
| waveLenCh2 | ethpm:X2WavelengthChannelBytes (base:Uint8Array) |
ARRAY SIZE: 3 |
|
| waveLenCh3 | ethpm:X2WavelengthChannelBytes (base:Uint8Array) |
ARRAY SIZE: 3 |
|
| xcvrType | scalar:UByte |
An XCVR type. | RANGE: [0, 255] |
| xgEthCode | ethpm:X2XgEthCodeBytes (base:Uint8Array) |
ARRAY SIZE: 2 |
|
| xgFcCode | ethpm:X2XbFcCodeBytes (base:Uint8Array) |
ARRAY SIZE: 4 |
Internal Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
| status | mo:ModificationStatus (scalar:Bitmask32) |
The upgrade status. This property is for internal use only. | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |