vpc:If

The vPC interfaces information, which enables links that are physically connected to two different Fabric devices to appear as a single port channel by a third device. The third device can be a switch, server, or any other networking device that supports port channels. A vPC can provide Layer 2 multipathing, which allows you to create redundancy and increase bisectional bandwidth by enabling multiple parallel paths between nodes and allowing load balancing traffic.

Telemetry Sensor Path(s)
Configurable Properties
PROPERTY NAME DATA TYPE DESCRIPTION PERMITTED VALUES
id vpc:Id
(scalar:Uint16)		 The vPC interface identifier.
RANGE: [1 , 16384]
Operational Properties
PROPERTY NAME DATA TYPE DESCRIPTION POSSIBLE VALUES
compatQual vpc:CompatQual
(scalar:Uint32)		 Compatibility reason code RANGE: [0, 4294967295]
DEFAULT: 1102512194
compatQualStr string:Basic
 Compatibility reason code string A sequence of characters
DEFAULT: Consistency Check Not Performed
compatSt vpc:CompatSt
(scalar:Enum8)		 Compatibility status SELECTION:
0 - pass
1 - fail
2 - notDone
DEFAULT: notDone
localOperSt vpc:OperSt
(scalar:Enum8)		 Local Operational State SELECTION:
0 - unknown
1 - down
2 - up
3 - noCfg
DEFAULT: unknown
upVlans string:Basic
 The active VLANs of the interface. You can configure VLANs to be in the active state, in which the VLANs pass traffic, or the suspended state, in which the VLANs do not pass traffic. By default, the VLANs are in the active state and pass traffic. Note that even if a VLAN is configured to be active, it can be operationally suspended if it has not been configured on the peer switch. A sequence of characters
Internal Properties
PROPERTY NAME DATA TYPE DESCRIPTION POSSIBLE VALUES
modTs mo:TStamp
(scalar:Date)		 The time when this object was last modified. SELECTION:
0 - never
DEFAULT: never
status mo:ModificationStatus
(scalar:Bitmask32)		 The upgrade status. This property is for internal use only. SELECTION:
2 - created
4 - modified
8 - deleted
16 - replaced