lldp:If
The LLDP interface, which holds the operational states.
Telemetry Sensor Path(s)
Configurable Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | PERMITTED VALUES |
|---|---|---|---|
| adminRxSt | lldp:AdminSt (scalar:Enum8) |
Receive admin state | SELECTION: 1 - enabled 2 - disabled DEFAULT: enabled |
| adminTxSt | lldp:AdminSt (scalar:Enum8) |
Transmit admin state | SELECTION: 1 - enabled 2 - disabled DEFAULT: enabled |
| descr | naming:Descr1024 (string:Basic) |
Description | MAX SIZE: 1024 |
| name | naming:Name256 (string:Basic) |
The name of the object. | MAX SIZE: 63 |
| portDCBXPVer | lldp:DCBXPVerType (scalar:Enum8) |
DCBXP Version | SELECTION: 0 - auto 2 - CEE 3 - IEEE DEFAULT: auto |
| portDesc | naming:Descr (string:Basic) |
Port description | MAX SIZE: 128 |
| sysDesc | naming:Descr (string:Basic) |
System description | MAX SIZE: 128 |
| tlvSetMgmtIpv4 | address:Ip |
Tlv ipv4 | Value must match ipv4 or ipv6 known format |
| tlvSetMgmtIpv6 | address:Ip |
Tlv ipv6 | Value must match ipv4 or ipv6 known format |
| tlvSetVlan | lldp:MgmtVlanId (scalar:Uint16) |
Tlv vlan | RANGE: [0 , 4094] DEFAULT: 0 |
Operational Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| mac | address:MAC |
Port mac | Value must match MM:MM:MM:SS:SS:SS format |
| operRxSt | lldp:OperSt (scalar:Enum8) |
Operational state of receive enable | SELECTION: 1 - disabled 2 - enabled 3 - up 4 - down DEFAULT: disabled |
| operTxSt | lldp:OperSt (scalar:Enum8) |
Operational state of transmit enable | SELECTION: 1 - disabled 2 - enabled 3 - up 4 - down DEFAULT: disabled |
| portDCBXSt | scalar:Bool |
Port DBCX enabled status | SELECTION: true or false |
| portMode | lldp:PortMode (scalar:Uint16) |
Specifies the Interface Port Mode | SELECTION: 0 - normal 1 - recovery DEFAULT: normal |
| portVlan | lldp:PortVlan (scalar:Uint16) |
Port vlan | SELECTION: 0 - unspecified DEFAULT: unspecified |
| wiringIssues | lldp:WiringIssues (scalar:Bitmask32) |
Wiring Issues | SELECTION: 0x0 - none 0x01 - fabric-domain-mismatch 0x02 - ctrlr-uuid-mismatch 0x04 - wiring-mismatch 0x08 - unknown-neighbor 0x10 - adjacency-not-detected 0x20 - infra-vlan-mismatch 0x40 - infra-ip-mismatch 0x80 - unapproved-ctrlr 0x0100 - pod-id-mismatch 0x0200 - unapproved-serialnumber 0x0400 - fabric-id-mismatch DEFAULT: none |
Internal Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| adminSt | nw:IfAdminSt (nw:AdminSt) |
The administrative state of the object or policy. | SELECTION: 1 - enabled 2 - disabled |
| id | nw:IfId (base:IfIndex) |
An identifier . | Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100 |
| modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
| status | mo:ModificationStatus (scalar:Bitmask32) |
The upgrade status. This property is for internal use only. | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |