udld:PhysIf
Unidirectional Link Detection Interface
Telemetry Sensor Path(s)
Configurable Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | PERMITTED VALUES |
|---|---|---|---|
| adminSt | udld:PortEnable (scalar:Enum8) |
UDLD enable/disable per port | SELECTION: 0 - port-enabled 1 - port-fiber-disabled 2 - port-default 3 - port-default-disable DEFAULT: port-default |
| aggressive | udld:AdminSt (scalar:Enum8) |
Interface Aggressive Mode | SELECTION: 1 - enabled 2 - disabled DEFAULT: disabled |
| biDirDetect | udld:PortEnable (scalar:Enum8) |
Bidirectional Detection Enabled | SELECTION: 0 - port-enabled 1 - port-fiber-disabled 2 - port-default 3 - port-default-disable DEFAULT: port-default |
Operational Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| error | scalar:Uint64 |
failure code | RANGE: [0, 18446744073709551615] DEFAULT: 0 |
| fiber | udld:OperSt (scalar:Enum8) |
Fiber Port | SELECTION: 1 - enabled 2 - disabled DEFAULT: disabled |
Internal Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| id | nw:IfId (base:IfIndex) |
An identifier . | Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100 |
| modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
| status | mo:ModificationStatus (scalar:Bitmask32) |
The upgrade status. This property is for internal use only. | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |