span:Monitor
Monitor MO for each SPAN session identified by session id
Telemetry Sensor Path(s)
Configurable Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | PERMITTED VALUES |
|---|---|---|---|
| aclName | span:AclName (string:Basic) |
Name of the Access Control List applied on the current monitor session | MAX SIZE: 64 DEFAULT: |
| allowSharing | scalar:Bool |
Denotes whether sharing is enabled for the given filter ACL | SELECTION: true or false DEFAULT: false |
| configState | span:State (scalar:Enum8) |
State of the current session as configured by the user | SELECTION: 1 - up 2 - down DEFAULT: down |
| description | span:Description (string:Basic) |
Description for the current monitor session | MAX SIZE: 32 DEFAULT: |
| destinationIp | address:Ip |
Destination IP address for the current erspan session | Value must match ipv4 or ipv6 known format |
| destinationIpv6 | address:IPv6 |
Destination IPv6 address for the current erspan session | Value must match ipv6 format |
| destinationPorts | nw:IfId (base:IfIndex) |
Destination ports for the current session | Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100 |
| erspanId | span:ErspanId (scalar:Uint16) |
ERSPAN identification number | RANGE: [0 , 1023] DEFAULT: 0 |
| fwdDropsDirection | span:FwdDropSrcDirection (scalar:Enum8) |
Denotes forwarding drop direction for the given erspan-source session None, Rx, Tx, Both | SELECTION: 0 - none 1 - rx 2 - tx 3 - both DEFAULT: none |
| headerType | span:HeaderVer (scalar:Enum8) |
Denotes header type ver is enabled for the given erspan session | SELECTION: 0 - v2 1 - v3 2 - v3-rfc-compliant |
| id | span:SsnId (scalar:Uint16) |
Session identification number for current monitor session. | RANGE: [1 , 32] |
| ipDscp | span:IpDscp (scalar:Uint16) |
ERSPAN IP DSCP value | RANGE: [0 , 63] DEFAULT: 0 |
| ipTtl | span:IpTtl (scalar:Uint16) |
ERSPAN IP time-to-live value | RANGE: [1 , 255] DEFAULT: 255 |
| isFwdDropsRx | scalar:Bool |
Denotes whether source forwarding drops rx is enabled for the given erspan-source session | SELECTION: true or false DEFAULT: false |
| isFwdDropsRxLowPriority | scalar:Bool |
Denotes whether source forwarding drops rx has low priority for the given erspan-source session | SELECTION: true or false DEFAULT: false |
| isMarkerMilliSeconds | scalar:Bool |
Denotes whether marker value given in millis seconds | SELECTION: true or false DEFAULT: false |
| isMarkerPacket | scalar:Bool |
Denotes whether marker packet is enabled for the given erspan-source session | SELECTION: true or false DEFAULT: false |
| markerPktInt | span:MarkerPktInt (scalar:Uint16) |
ERSPAN session send marker packet interval value | RANGE: [1 , 1000] DEFAULT: 100 |
| mtu | span:MtuValue (scalar:Uint16) |
Value of Maximum transmission unit truncation size for SPAN packets | RANGE: [64 , 10240] DEFAULT: 10240 |
| sourceIp | address:Ip |
Source IP address for the current erspan destination session | Value must match ipv4 or ipv6 known format |
| sourceIpv6 | address:IPv6 |
Source IPv6 address for the current erspan destination session | Value must match ipv6 format |
| type | span:Type (scalar:Enum8) |
Type of the current monitor session | SELECTION: 0 - local 1 - erspan-source 2 - erspanDst 3 - warp DEFAULT: local |
| vrfName | l3:VrfName (string:Basic) |
VRF name for the erspan-source session.(user specified name / default / manangement) | A sequence of characters |
Operational Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| operState | span:OperStQual (scalar:Enum8) |
Actual State of the current session updated by SPAN process | SELECTION: 1 - active 2 - no-hw-res 3 - no-oper-src-dst 4 - error 5 - no-src 6 - no-dst 7 - no-src-dst 8 - shut 9 - invalid-dst-mode 10 - invalid-src-mode 11 - no-flow-id 12 - multi-dest-not_allowed 13 - invalid-vrf 14 - invalid-ip 15 - gip-invalid 16 - acl-disabled 17 - acl-no-res-string 18 - acl-vdc-mismatch 19 - no-ssn-f1-f2 20 - no-erspan-switch-id 21 - no-route 22 - arp-not-resolved 23 - no-eg-intf 24 - no-svi-member 25 - no-dce-route 26 - no-src-mac 27 - no-dce-switch-id 28 - no-dce-src-lid 29 - no-dce-egress-intf 30 - no-si-1qtag 31 - no-fpc 32 - unsupported-route 33 - erspan-dest-failed 34 - erspan-action-not-supported 35 - udf-not-present 36 - pfc-ns-port 37 - udf-unsupported-on-vlan 38 - hw-err 39 - no-ipv6-route 40 - gipv6-invalid 41 - ipv6-invalid DEFAULT: shut |
| shutError | span:ErrorInt (scalar:Uint16) |
failure code for raising a config fault during shut operation | RANGE: [0 , 32] DEFAULT: 0 |
Internal Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
| status | mo:ModificationStatus (scalar:Bitmask32) |
The upgrade status. This property is for internal use only. | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |