pim6:If
This object holds PIM6 information that is operated at a interface level
Telemetry Sensor Path(s)
Configurable Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | PERMITTED VALUES |
|---|---|---|---|
| adminSt | nw:IfAdminSt (nw:AdminSt) |
The administrative state of the object or policy. | SELECTION: 1 - enabled 2 - disabled |
| bfdInst | rtdmc:BfdInstSt (scalar:Enum8) |
BFD Instance | SELECTION: 0 - none 1 - enabled 2 - disabled DEFAULT: none |
| border | scalar:Bool |
Border policy | SELECTION: true or false |
| ctrl | rtdmc:IfCtrl (scalar:Bitmask8) |
Controls | SELECTION: 1 - border 2 - passive |
| descr | naming:Descr1024 (string:Basic) |
Description | MAX SIZE: 1024 |
| drDelay | rtdmc:DRDelay (scalar:Uint16) |
Designated Router Delay | RANGE: [1 , 65535] DEFAULT: 3 |
| drPrio | rtdmc:DRPrio (scalar:Uint32) |
Designated Router Priority | RANGE: [1 , 4294967295] DEFAULT: 1 |
| jpRtMap | string:Basic |
Join Prune Policy | A sequence of characters |
| name | naming:Name256 (string:Basic) |
The name of the object. | MAX SIZE: 63 |
| neighRtMap | string:Basic |
Neighbor route-map Policy | A sequence of characters |
| neighpfxList | string:Basic |
Neighbor prefix-list Policy | A sequence of characters |
| passive | scalar:Bool |
Interface in Passive mode. No send/receive. | SELECTION: true or false |
| pimSparseMode | scalar:Bool |
Sparse Mode | SELECTION: true or false |
| rfcStrict | scalar:Bool |
Comply to protocol strictly, do not process joins from unknown neighbors | SELECTION: true or false |
| rtEpPDn | reference:BinRef |
RtEpP DN |
Operational Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| dr | address:Ip |
PIM DR | Value must match ipv4 or ipv6 known format |
| genID | rtdmc:GenId (scalar:Uint32) |
Generation ID | RANGE: [0, 4294967295] |
| ifName | string:Basic |
Interface Name | A sequence of characters |
| ipAddr | address:Ip |
IP Address of the interface | Value must match ipv4 or ipv6 known format |
| nbrHoldTime | scalar:Uint32 |
PIM Nbr HoldTime | RANGE: [0, 4294967295] |
| nextHello | scalar:Date |
Next hello time | DATE FORMAT: %Y-%m-%dT%H:%M:%S.%f%z |
Internal Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| id | nw:IfId (base:IfIndex) |
An identifier . | Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100 |
| modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
| status | mo:ModificationStatus (scalar:Bitmask32) |
The upgrade status. This property is for internal use only. | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |